• Title/Summary/Keyword: Carbon dioxide (CO2)

Search Result 1,976, Processing Time 0.03 seconds

Cardiovascular Effects of Propofol Infused for Maintenance of Anesthesia in Dogs (개에서 Propofol 점적투여율 변화가 심혈관계에 미치는 영향)

  • 권영삼;장광호;장환수;박현정;임재현;오태호;엄기동;장인호
    • Journal of Veterinary Clinics
    • /
    • v.19 no.2
    • /
    • pp.199-203
    • /
    • 2002
  • Cardiovascular effects of propofol, were assessed after premedication with xylazine(1.0 mUkg, IM) under oxygen supply(200 ml/kg/min) via a endotracheal tube. Twelve adult mixed-breed dogs were divided into four groups; 0.2(Group 1), 0.4(Group 2), 0.6(Group 3) and 0.8 mg/kg/min(Group 4) of propofol respectively. Arterial blood pressure and electrocardiogram were monitored with a physiograph after an arterial catheter was inserted into the femoral artery. pH, arterial carbon dioxide tension($PaCO_2$and arterial oxygen tension($PaO_2$) were evaluated with arterial blood collected through the inserted catheter. Diastolic arterial pressure, systolic arterial pressure and mean arterial pressure were decreased slightly in Group I IIand III, but decreased significantly in Group IV. They were increased rapidly after stopping propofol infusion in Group IV pH was maintained in normal range in Group I, II and m, but was decreased in proportion to time passing in Group IV. $PaCO_2$ was increased significantly only in Group IV but $PaO_2$ was maintained in normal range in all groups Although heart rate was recorded in normal range for 90 minutes, arythmia was noted after stopping propofol infusion in all groups. It was concluded that propofol depressed the cardiovascular system in proportion to infusion dosage, and 0.8 mg/kg/min of propofol infusion rate was not appropriated in canine anesthesia with xylazine premedication.

Characteristics of Non-premixed Edge Flames in a Counterflow Slot Burner

  • Cha, Min-Suk;Ronney, Paul D.
    • Journal of the Korean Society of Combustion
    • /
    • v.10 no.4
    • /
    • pp.33-40
    • /
    • 2005
  • The propagation rates of advancing and retreating non-premixed edge flames in a slot-jet counterflow were measured as a function of strain rate for varying jet spacing, mixture strength, stoichiometric mixture fractions $(Z_{st})$ and Lewis numbers (Le). Methane and propane fuels were tested and nitrogen and carbon dioxide were used as inerts. As results, we could identify igniting fronts, retreating fronts, two total extinction limits, and short-length edge flames. A burner separation affected to a low extinction limit only. Regimes for advancing and retreating edges together with total extinction were mapped in terms of normalized flame thickness and heat loss factor for $CH_4/O_2/N_2$ mixtures. Edge flames for $Z_{st}$ > 0.5 behaved like a stronger mixture while for $Z_{st}$ < 0.5 showed deteriorated feature, because of relative locations of a non-premixed flame and intermediate species such as CO and $H_2$. Furthermore, due to the relative importance of heat loss, propagating speeds of edge flames were significantly enhanced in $CH_4/O_2/CO_2$ mixtures (Le < 1) demonstrating increasing stability limits. However $C_3H_8/O_2/N_2$ mixtures (Le > 1) showed opposite result.

  • PDF

$CO_{2}$ sensing characteristics of solid electrolyte gas sensor with the sensing membrane prepared by the mixture of alkali metal carbonate and binder (알카리 금속 탄산염과 결착제의 혼합물을 감지물질로 하는 고체전해질 가스센서의 $CO_{2}$ 감응 특성)

  • Chai, Yu-Sug;Song, Kap-Duk;Kang, Bong-Hwi;Seo, Moo-Gyo;Lee, Duk-Dong
    • Journal of Sensor Science and Technology
    • /
    • v.7 no.2
    • /
    • pp.111-116
    • /
    • 1998
  • The simple solid electrolyte carbon dioxide sensor with heaters were fabricated by using Li ionic conductor. Two Au electrodes were used for the reference and sensing electrode respectively. Two types of gas sensors, type ( I ) and type (II), were fabricated. Type ( I ) sensor was fabricated by the method of melting and crystallizing alkali metal carbonate at the temperature of $420{\sim}500^{\circ}C$. The sensing membrane of type (II) sensor was formed by the printing method on sensing electrode after metal carbonate was mixed with binder. The response characteristics of sensors fabricated for the carbon dioxide were investigated for a range of $CO_{2}$ concentration from 950 ppm to 9,950 ppm at operating temperature $420^{\circ}C$. Type ( I ) sensor and type (II) sensor showed the sensitivity of 62 mV/decade and 65 mV/decade respectively. The emf/decade of type (II) sensor tested at $420^{\circ}C$ almost followed the theoretical value of Nernst's equation and showed stable response characteristics with the fast response time of $15{\sim}20$ sec. Also type (II) sensor showed excellent stability and reproduction properties for 60 days.

  • PDF

Soil Carbon Dioxide Evolution in Three Deciduous Tree Plantations (3종류 활엽수 조림지 토양의 이산화탄소 발생)

  • Son, Yowhan;Lee, Goo;Hong, Ji-Young
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.27 no.4
    • /
    • pp.290-295
    • /
    • 1994
  • Soil $CO_2$ evolution was measured using the soda-lime method for 20-year-old L. tulipifera, P. albaglandulosa, and Q. rubra plantations planted on a similar soil type in the Kwangneung Experimental Forest during the growing season of 1994. Soil $CO_2$ evolution ranged from $0.21g/m^2/hr$ for Q. rubra to $0.33g/m^2/hr$ for L. tulipifera. and was significantly different among species. We found positive correlations between soil $CO_2$ evolution and air(p<0.001, r=0.39) and soil temperatures(p<0.001, r=0.49). Peaks in seasonal soil $CO_2$ evolution occurred in July and August. Seasonal soil $CO_2$evolution did not necessarily follow changes in air and soil temperatures. This study implies that more work is needed to clarify the influence of other factors on soil $CO_2$evolution.

  • PDF

Decomposition of Aromatic Organic Solvents with Catalytic Oxidation in SC-CO2 (초임계 이산화탄소내 촉매산화분해에 의한 방향족 유기용매의 분해특성)

  • Lee, Seung Bum;Hong, In Kwon
    • Applied Chemistry for Engineering
    • /
    • v.9 no.5
    • /
    • pp.624-628
    • /
    • 1998
  • The aromatic organic solvents(BTX) were decomposed in the fixed bed reactor packed with a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst, then, supercritical carbon dioxide(SC-$CO_2$) was used as the reaction media. And the conversion was dependent on the inlet concentration of BTX and the molar density of SC-$CO_2$. The conversion of BTX was decreased with increasing of inlet concentration, and was increased with temperature and pressure. The maximum conversion of benzene was 98.5% at $300^{\circ}C$ and 204.1 atm, and that of toluene and xylene were 82.0 and 76.5%, respectively, at $350^{\circ}C$ and 204.1 atm. The intermediate products of partial oxidation were identified as benzaldehyde, phenol, benzenemethanol, and so on. The BTX can be effectively converted into harmless $CO_2$ and $H_2O$ at appropriate operating condition. Thus, the nontoxic recovery process was suggested as the removal method of BTX.

  • PDF

A Study on the CO2 Methanation in Power to Gas (P2G) over Ni-Catalysts (Ni 촉매 상에서 Power to Gas (P2G) 기술의 CO2 메탄화 반응에 관한 연구)

  • YEOM, GYUIN;SEO, MYUNGWON;BAEK, YOUNGSOON
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.30 no.1
    • /
    • pp.14-20
    • /
    • 2019
  • The power to gas (P2G) is one of the energy storage technologies that can increase the storage period and storage capacity compared to the existing battery type. One of P2G technologies produces hydrogen by decomposing water from renewable energy (electricity) and the other produces $CH_4$ by reacting hydrogen with $CO_2$. The objective of this study is the reaction of $CO_2$ methanation which synthesized methane by reacting carbon dioxide and hydrogen. The effect of $CO_2$ conversion and $CH_4$ selectivity on reaction temperature, pressure, and methane contents over 40% Ni catalyst was mainly investigated throughout this study. As a result, the activity of this catalyst appeared to be the highest in $CH_4$ yield at around $400^{\circ}C$ and the selectivity of $CH_4$ increased with increasing reaction pressure. The methane content was not significantly influenced below 3% of all componets. As the space velocity increases from 10,000 to 30,000/hr, the $CO_2$ conversion rate tends to decrease.

Carbonation of Portland Cement Studied by Diffuse Reflection Fourier Transform Infrared Spectroscopy

  • Ylmen, Rikard;Jaglid, Ulf
    • International Journal of Concrete Structures and Materials
    • /
    • v.7 no.2
    • /
    • pp.119-125
    • /
    • 2013
  • Carbonation is a natural ageing process for cement. This study focuses on how the carbonation rate varies with selected hydration times and atmospheric conditions during the early stages of reacting dried cement paste. Diffuse reflection Fourier transform infrared spectroscopy is shown to be a suitable technique to monitor the formation of carbonates in cement. Combined with a previously developed freeze drying technique, carbonation can be studied at specific hydration stages. In ambient air both calcium hydroxide and calcium silicate hydrate (C-S-H) in cement are carbonated. Increased hydration time enhances the carbon dioxide uptake, which indicates that the calcium in the hydration products reacts more easily than the calcium in the clinker phase. In a humid $CO_2$ atmosphere, the carbonation process is so pronounced that it decomposes C-S-H into calcium carbonate and silica. In a moist $N_2$ atmosphere no carbonation occurs, but the sulfate chemistry of the cement seems to be affected due to the formation of ettringite.

A dynamic simulation study on SCR (Stream Carbon dioxide Reforming) process for pilot plant operation (파일럿 플랜트 최적운전을 위한 SCR공정 동적 모사)

  • Kim, Yong Heon;Bae, Ji Han;Park, Myoung Ho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.11a
    • /
    • pp.136.2-136.2
    • /
    • 2011
  • A dynamic simulation study on SCR process in GTL process was carried out in order to find optimum operation conditions for pilot plant operation. Optimum operating conditions for SCR synthesis gas process were determined by changing operation variables such as feed temperature and pressure. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Dynamic simulation results were fed back to feed operation condition for optimizing productivity, especially for appropriate condition to FT (Fischer-Tropsch) synthesis unit.

  • PDF

Production of Biomass and Lipid Using Microalga Nannochloris oculata Under Different Conditions of Nitrogen and Irradiance (미세조류 Nannochloris oculata의 성장과 지질 생산에 미치는 질소 농도와 광량의 영향)

  • Park, Sang-Jin;Choi, Yoon-E;Kim, Chul-Woong;Park, Won-Kun;Yang, Ji-Won
    • KSBB Journal
    • /
    • v.25 no.6
    • /
    • pp.553-558
    • /
    • 2010
  • Increasing demands on fossil fuel have led to the unprecedented attraction to microalgal biofuel as an alternative energy. In this study, we investigated growth and lipid productions of microalga Nannochloris oculata under various carbon dioxide or nitrogen source concentrations and irradiance conditions. Biomass production of N. oculata was highest under 2% $CO_2$ with 0.3 flow rate (vvm). In addition, biomass productivities were proportional to the concentration of nitrogen source, whereas lipid biosynthesis was suppressed under higher nitrogen concentration (up to 50 mg/L). High irradiation ($160{\sim}180\;{\mu}mol/m^2{\cdot}s$) enhanced growth rate and lipid production of N. oculata.

Review of Literature on Chi Acupunture(Carboxytherapy) (경피기주입술(Carboxytherapy)에 대한 문헌적 고찰)

  • Shim, Woo-Jin;Song, Jae-Chol;Lee, Jong-Soo;Shin, Hyun-Taeg
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.6 no.2
    • /
    • pp.43-49
    • /
    • 2006
  • Objective : This study was conducted to offer basic materials for the clinical study of Chi acupuncture (carboxytherapy). Methods : Recent clinical studies were reviewed for carboxytherapy (carbon dioxide therapy) and the ancient and present texts were reviewed for Chi acupuncture. Results and Conclusions : Chi acupuncture is oriental medical therapeutic treatment using carboxytherapy. Chi acupuncture refers to the transcutaneous administration of CO2 gas for therapeutical purposes relating to obesity, cellulites, local circulation and skin irregularity. Recent studies have demonstrated the effects of this therapy on adipose tissue by showing vasomotor effects, increasing local circulation and inducing a partial increase in tcPO2. Chi acupuncture influences the microcirculation and likely has a positive effect upon the physiological oxidative lipolytic process.

  • PDF