• 자원환경지질
• /
• 제39권1호
• /
• pp.9-25
• /
• 2006

백운 금-은광상은 트라이아스기 또는 쥐라기의 엽리상화강섬록암내에 발달된 단층대를 충진한 천열수성 석영맥광상이다. 이 광상의 광화작용은 단층-각력대에 수반되며 2시기로 구분된다. I시기는 다시 조기와 말기로 구분되며 주된 광화시기이다. II시기는 광화작용이 관찰되지 않는다. I시기 소기는 모암변질과 유비철석, 황철석, 자류철석, 섬아연석, 백철석, 황동석, 황석석 및 방연석이 관찰된다. I시기 말기는 금-은광물정출시기로 일렉트럼, 함은사면동석, 스테파나이트, 보울란제라이트, 농홍은석, 휘은석 , 시르메라이트, 자연은, Ag-Te -Sn-S계 광물, Ag-Cu-S계 광물, 황철석, 황동석 및 방연석이 관찰된다. 유체포유물 자료에 의하면, 광화 I시기의 균일화온도와 염농도는 각각 $171.6\~360.8^{\circ}C,\;0.5\~10.2\;wt.\%$로써 광화유체가 천수의 혼입에 의한 냉각과 희석이 있었음을 지시한다. 또한, 광화 I시기에 관찰되는 광물공생군으로부터 구한 생성온도(조기: $236\~>380^{\circ}C$, 말기: $<197\~272^{\circ}C$)와 황분압(조기: $>10^{-7.8}\;atm.,$ 말기: $10^{-14.2\~10^{-16}\;atm.$)이 광화작용이 진행됨에 따라 감소되어 진다. 황($2.4\~6.1\%_{\circ}$(조기=$3.4\~5.3\%_{\circ}$, 말기=$2.4\~6.1\%_{\circ}$)), 산소($4.5\~8.8\%_{\circ}$(석영: 조기=$6.3\~8.8\%_{\circ}$, 말기=$4.5\~5.6\%_{\circ}$)), 수소($-96\~-70\%_{\circ}$(석영: 조기=$-96\~-70\%_{\circ}$, 말기=$-78\~-74\%_{\circ}$, 방해석: 말기=$-87\~-76\%_{\circ}$)) 및 탄소($-6.8\~-4.6\%_{\circ}$(방해석: 말기)) 동위원소 값의 자료로 볼 때, 이 광상의 광화유체는 마그마 기원의 유체가 주종을 이룬 것으로 보이며 광화작용이 진행됨에 따라 기원이 다른 천수의 혼입이 작용한 것으로 해석할 수 있다.

• 전기화학회지
• /
• 제6권2호
• /
• pp.130-133
• /
• 2003

3,4-dihydroxybenzoic acid(3,4-DHBA)를 전기화학법으로 유리탄소 전극 위에 중합하여 GC/p-3,4-DHBA형의 전극을 제작한 후 이 전극을 도파민으로 재 수식한 전극을 제작하였다. 이 때 고분자 피막 상에 카르복시기와 도파민의 아민 기간에 짝 짓기 반응은 1-(3-dimethylaminopropyl)-3-ethyl carbodiimide hydrochloride(EDC)의 존재하에서 진행되었다. 이 반응과정에서 반응한 도파민의 양은 수정판 분석기(quartz crystal analyzer:QCA)에 의하여 결정하였으며 그때 전극형태는 QCA(Au)/p-3,4-DHBA-dopamine이었다. 이 전극의 표면은 o-퀴논부분을 갖고 있어서 티탄이온에 선택성이 큰 특성을 갖고 있다. 이 전극의 산화환원과정은 $hydroquinone = quinone +2H^+2e^-$으로 두 개의 강한 파와 두개의 약한 파가 CV과정에서 관찰되었다. 이 수식전극으로 Ti(IV)이온을 $4.13\times10^{-5} gcm^{-2}$만큼 포집할 수가 있었다. 이 수식 전극으로 $5.25\times10^{-4}M$에서 $5.25\times10^{-8}M$농도범위까지 정량 할 수 있는 상관계수가 0.997인 검정선을 얻었다.

• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.311-316
• /
• 2002

2-step 증착법과 Bias-Enhanced Nucleation(BEN)법을 이용해 다결정 Ni 기판에 고품질의 다이아몬드 박막 합성을 연구하였다. $810^{\circ}C$에서 1시간 증착하여 soot충을 형성시킨 후 기판온도를 soot층의 형성이 억제되는 온도인 $925^{\circ}C$로 올려 5시간 증착하는 2-step법을 통해 고품질의 다이아몬드를 합성할 수 있었다. 또한, $925^{\circ}C$에서 -220V의 bias를 10분 동안 기판에 인가한 후 2시간 동안 증착하는 BEN법을 이용해 양질의 다이아몬드를 합성할 수 있었다. $925^{\circ}C$에서 bias 처리를 하지 않은 경우에는 10시간 동안 증착을 시도한 후에도 다이아몬드가 생성되지 않았다.

• 한국의류학회지
• /
• 제2권1호
• /
• pp.167-176
• /
• 1978

The effect of additives in final rinse water during laundering on soiling, soil removal and some properties of fabrics has been studied with various fabrics. The additives examined were fabric softener (Sta-Puf), cationic surfactant (Apole PS), sizing materials such as CMC, PYA, cornstarch and mixture of CMC and cationic surfactant. The results obtained may be summerized as follows. L Addition of additives except PVA in final rinse water generally reduce the deposition of carbon-$CCl_4$ soil and it seems to be rather independant of the concentration of additives. The effect of additives on soil resistant is found to increase in the following order. cotton; Apole

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.355-360
• /
• 2002

ElectroSlag Strip Overlaying (ESSO) process has been around since 1970. ESSO process had limited acceptance due to a few problems associated with the use of this process in its very early stage. Limited knowledge and, most significantly, poor quality of the equipment and welding flux gave the ESSO process a bad name. However, this process is well accepted today and used in North America, Europe and Japan. The ESSO process provides low dilution overlays at high deposition rates, excellent and consistent deposit chemistry with excellent surface quality, and virtually no defects. Capitan has taken this process one step further through extensive research and development of the process itself as well as the equipment. The improvement brought to the process warranted the issuance in May 2000 of an US patent. This study demonstrates the feasibility of this process with immediate positive production results. The main achievements of this work are as follows: $\textbullet$ Development of six various strip-flux combinations on three different base materials: carbon steel, $\frac{1}{4}$ Cr/.5 Mo and 2 $\frac{1}{4}$ Cr/l Mo, fully tested with: penetrant, ultrasound, bends, hardness, overlay chemistry, corrosion and hydrogen disbonding. $\textbullet$ 12" dia. 90 hot formed elbows from straight pipe electroslag overlayed with "1 layer" and "2 layer" Alloy 625 $\textbullet$ a very unique development of miniaturized overlaying equipment able to perform overlay in pipe with diameters as low as 10" (254 mm). This development has large applications in the field of offshore, petrochemical, refining, pulp and paper and power generation industries. The aftermath of this development was its immediate acceptance by major end users with the completion of four projects of overlayed pipe in the USA and Far East Asia.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.167-169
• /
• 2009

We have carried out quantitative structure and property analysis of the nanoporous structures of low dielectric constant (low-k) carbon-doped silicon oxide (SiCOH) films, which were deposited with plasma enhanced chemical vapor deposition (PECVD) using vinyltrimethylsilane (VTMS), divinyldimethylsilane (DVDMS), and tetravinylsilane (TVS) as precursor and oxygen as an oxidant gas. We found that the SiCOH film using VTMS only showed well defined spherical nanopores within the film after thermal annealing at $450^{\circ}C$ for 4 h. The average pore radius of the generated nanopores within VTMS SiCOH film was 1.21 nm with narrow size distribution of 0.2. It was noted that thermally labile $C_{x}H_{y}$ phase and Si-$CH_3$ was removed to make nanopore within the film by thermal annealing. Consequently, this induced that decrease of average electron density from 387 to $321\;nm^{-3}$ with increasing annealing temperature up to $450^{\circ}C$ and taking a longer annealing time up to 4 h. However, the other SiCOH films showed featureless scattering profiles irrespective of annealing conditions and the decreases of electron density were smaller than VTMS SiCOH film. Because, with more vinyl groups are introduced in original precursor molecule, films contain more organic phase with less volatile characteristic due to the crosslinking of vinyl groups. Collectively, the presenting findings show that the organosilane containing vinyl group was quite effective to deposit SiCOH/$C_{x}H_{y}$ dual phase films, and post annealing has an important role on generation of pores with the SiCOH film.

• 대한화학회지
• /
• 제45권5호
• /
• pp.429-435
• /
• 2001

단량체인 N,N'-bis(2-pyrrol-1-yl-propyl)-4,4'-bipyridine(bpb)을 유리탄소전극 상에 전기화학적으로 중합한 고분자 피막전극을 erichrome black T(EBT) 와 glutathione(GSSG)의 1:1 용액으로 수식하여 GC/poly-bpb, EBT, GSSG형의 전극을 제작하고 이로써 Zn(II)을 포집한 전극을 제작하였다. 수식된 피막 내에서 이온의 확산계수는 아연이온이 포집되기 전후에 각각 2.43${\times}10^{-15}$과 9.14${\times}10^{-15}cm^2s^{-1}$으로 피막내의 전기화학적 활성자리에서 이탈이 거의 일어나지 않는 안정한 전극이다. 중합된 bpb의 양이 2.83${\times}10^4gmol^{-1}$에 대하여 1.17${\times}10^4gmol^{-1}$의 아연이온이 포집되었다. 이들 중에 산화-환원 과정에서 회합/해리에 관여하는 이온은 포집된 180개의 이온들 중에서 81.7%였다. 이는 EBT 만으로 수식된 전극에서 보다 3배정도 큰 값이다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.52-57
• /
• 2008

본 연구에서는 소나무재 심재부와 변재부 목질 다공체의 물리 화학적 성질에 미치는 탄화 온도의 영향을 FT-IR과 Raman 분광법을 이용하여 연구하였다. IR 연구에 따르면, $500^{\circ}C$의 예비 탄화 단계에서 셀룰로오스 및 헤미셀룰로오스의 C-O, C-O-C 및 C=O 작용기와 관련된 피크는 대부분 사라진 반면에 리그닌의 aromatic C=C 및 C-O 피크는 상대적으로 덜 감소하였으며, $700^{\circ}C$까지도 분해 과정이 진행되었다. 탄화 온도가 $900^{\circ}C$ 이상이 되면 $1575cm^{-1}$의 피크는 사라지고, $1630cm^{-1}$에 새로운 피크가 관찰되었는데, 전보에서 관찰한 새로운 탄소 구조체의 생성과 관련이 있는 것으로 보인다. 라만에서는 탄화 온도가 증가함에 따라 D-띠는 낮은 파수쪽으로 이동하였으며, 그 상대적인 세기는 증가하였는데, 이것은 시료의 결정 크기가 작아진다는 것을 의미한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.101-101
• /
• 2018

Quantitative measurement of chloride ion concentration has an important role in various fields of electrochemistry, medical science, biology, metallurgy, architecture, etc. Among them, its importance of architecture is ever-growing due to unexpected degradations of building structure. These situations are caused by corrosion of reinforced concrete (RC) structure of buildings. And chloride ions are the most powerful factors of RC structure corrosion. Therefore, precise inspection of chloride ion concentration must be required to increase the accuracy of durability monitoring. Multi-walled Carbon nanotubes (MWCNTs) have high chemical resistivity, large surface area and superior electrical property. Thus, it is suitable for the channels of electrical signals made by the sensor. Silver nanoparticles were added to giving the sensing property. CuBTC, one of the metal organic frameworks (MOFs), was employed as a material to improve the sensing property because of its hydrophilicity and high surface area to volume ratio. In this study, sensing element was synthesized by various chemical reaction procedures. At first, MWCNTs were functionalized with a mixture of sulfuric acid and nitric acid because of enhancement of solubility in solution and surface activation. And functionalized MWCNTs, silver nanoparticles, and CuBTC were synthesized on PTFE membrane, one by one. Electroless deposition process was performed to deposit the silver nanoparticles. CuBTC was produced by room temperature synthesis. Surface morphology and composition analysis were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), respectively. X-ray photoelectron spectroscopy (XPS) was also performed to confirm the existence of sensing materials. The electrical properties of sensor were measured by semiconductor analyzer. The chloride ion sensing characteristics were confirmed with the variation of the resistance at 1 V.

• Corrosion Science and Technology
• /
• 제16권6호
• /
• pp.285-293
• /
• 2017

The effects of sulfate reducing bacteria (SRB) on the corrosion and scaling of the Q235 carbon steel has been investigated in the simulated sewage water and oil field gathering pipelines production water, using scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), and three-dimensional stereoscopic microscope. Results indicated that the concentration of SRB reached the maximum value on the ninth day in simulated sewage water with a large amount of scaling on the surface of specimen. In oil field gathering pipelines, a large amount of scaling and mineralization of mineral salts and thick deposition of extracellular polymeric substance (EPS) layers were also observed on the surface of specimen. The thickness of biofilm was about $245{\mu}m$ within 30 days. After adding microbicides, the thickness of corrosion products film was only up to $48-106{\mu}m$ within 30 days, suggesting that SRB could induce biomineralization. Under-deposit corrosion morphology was uniform in the absence of microbicides while local corrosion was observed in the presence of microbicides.