• International Commerce and Information Review
• /
• v.14 no.1
• /
• pp.315-344
• /
• 2012

Each country has set low-carbon green growth to a new growth drive for the future while making various efforts. Accordingly, our country also set green growth to our policy task in top priority throughout our country while initiating various policies. Our country has focused on initiating a few policies in green growth. Our country has focused on the development of green industries to secure our national competitiveness while generating added values in green growth. It is necessary to have studies in initiating policies in balance when we consider that green growth should be initiated through the shift over the whole lifestyle. On the other hand, policies led and driven by the central government have been emphasized. Although the planning and establishment of policies might be said to fall under the central government's main areas, green growth policies can be realized regionally in the end. Considering these circumstances, the coordination in a proper way between the central government and each municipality can also be seen as major characteristics only in our country, which can be hardly seen in other countries. This study aims at developing the initiative strategies in our country's green logistics while analyzing the characteristics of green growth and situations of green logistics initiative, studying the government's policies to support green logistics, reviewing the government's policies for supports, and suggesting alternatives for them.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.165-180
• /
• 1997

The structure such as underground external walls of buildings, conduit and box culvert supports the surcharge loads (point, strip and line loads) . The vertical and horizontal stresses in a soil mass depend on the backfill width and wall friction, etc. The investigations described in this paper is designed to identify the magnitude and the distributions of the lateral and vertical pressure which is occurred by the narrowly backfilled soil in an open cut by the surcharge loads. For these purposes, model tests were performed for various width of backfill in a model test box by considering the wall friction using carbon rods. The results of test were compared with the theories of Weissenbach and VS Army Code and also with the results of the numerical analysis using finite difference method which introduces Mohr-Coulomb failure hypothesis.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1469-1480
• /
• 2014

This study, through the survey of citizens of Daegu in regard to the environment education experience and citizens perception, seeks to identify the order of importance and perception on the severity of environment. The survey has found that 36.4% citizens of Daegu have environment education experience. Those who have experience have high standard of living, live in high population density area and where pollutant generating plants are prevalent. In addition they are likely to live in apartment, are younger, and the higher the education level, more opportunities they have in getting environment education. The study has found that the environment education experience gives noticeable influence on environment perception, environment attitude, and environment activities. Also, those who have the environment education are likely to be interested in environment, know green growth policies, and are positive about local environment activities. Thus, they are willing to participate in activities to improve local environment and have emphasized the need for more environment education. As for what environment elements are most severe, they pointed to the "global warming and climate change" and "everyday garbage" and as for what are important, they chose "drinking water quality" and "global warming and climate change." Based on the study, we came to the conclusion that more environment education should be provided to elevate the interest in environment and subsequently, foster the sense of responsibility and civic mind toward the preservation of environment. In light of above, local governments must expand their supports and fully utilize the Local Agenda 21 to promote the education and increase the perception of citizens on the environment.

• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.345-355
• /
• 2020

In this paper, vibration characteristics of double-walled carbon nanotubes (CNTs) is studied based upon nonlocal elastic shell theory. The significance of small scale is being perceived by developing nonlocal Love shell model. The wave propagation approach has been utilized to frame the governing equations as eigen value system. The influence of nonlocal parameter subjected to diverse end supports has been overtly analyzed. An appropriate selection of material properties and nonlocal parameter has been considered. The influence of changing mechanical parameter Poisson's ratio has been investigated in detail. The dominance of boundary conditions via nonlocal parameter is shown graphically. The results generated furnish the evidence regarding applicability of nonlocal shell model and also verified by earlier published literature.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.351-358
• /
• 2007

Unlike external bonded steel plate or carbon fiber, the external unbonded strengthening using hi-strength bar has some advantages in speed and simplicity of installation. It is not required surface preparations and not affected by environmental conditions. A set of nine laboratory tests on RC beams strengthened using the hi-tension bars are reported. Anchoring pin developed in former research is installed at the end of beam to connect the hish-tension bar to RC beam. The test results strengthened by hi-tension bars are compared with those of non-strengthened specimens. The main test parameters are the cross-sectional area of the high-tension bar, distance of stirrups and condition of supports. Test results show that the beams reinforced are superior to reference specimens, especially for the strength and deformation capacity. Also, shear resisting effect of hi-strength bar can be confirmed in the specimens which have lack of stirrups.

• Journal of the korean society of oceanography
• /
• v.35 no.2
• /
• pp.98-108
• /
• 2000

A geochemical study on a hemipelagic core sediment taken from the northwest Pacific Ocean (eastern edge of the Shikoku Basin) was conducted to use of excess barium (Ba(ex)) for evaluate the paleoceano-graphic changes. Also, the excursion of sedimentary Ba(ex) was compared with those of biogenic opal, carbonate and organic carbon content in the sediment during the last glacial and interglacial periods. The calculated Ba(ex) derived from the major and minor element shows a distinctive glacial-interglacial variations, and the mass accumulation rate (MAR) of Ba(ex) shows coincident variations with the MARs of biogenic fractions. Especially, strong positive correlation (r$^2$=0.85) between the MAR of Ba(ex) and the MAR of biogenic carbonate is recognized. Based on the strong positive correlation(r$^2$=0.85) between the MAR of Ba(ex) and the MAR of carbonate content, we estimated the degree of carbonate dissolution rate during the glacial and interglacial periods. Assuming the proportional variation and the refractory nature of barium exist between two factors, the variation of index Ca/Ba ratio in sediment indicates the degree of carbonate dissolution. Sedimentary Ca/Ba ratios index clearly show a striking fluctuation between the glacial and interglacial periods with higher positive correlation during glacial and lower correlation during interglacial. This fact indicates enhanced carbonate dissolution during interglacial period. Thus, the sedimentary Ca/Ba ratio in sedimentary records can be used as one of the useful tools for estimation of the relative degree of carbonate dissolution. The excursion of Ba(ex) and the sedimentary Ca/Ba ratio follows the typical pacific carbonate dissolution type(enhanced dissolution during interglacial and reduced dissolution during glacial time) as suggested by previous work (e.g., Wu et al., 1990). Variation in sedimentary Ca/Ba ratio thus strongly supports that glacial-interglacial fluctuation in carbonate dissolution has been prevailed in the northwest Pacific Ocean.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.171-171
• /
• 2009

The electrodes are usually made of a porous mixture of carbon-supported platinum and ionomers. $SnO_2$ particles provide as supports that have been used for DMFCs, and it have high catalytic activities toward methanol oxidation. The main advantage of $SnO_2$ supported electrodes is that it has strong chemical interactions with metallic components. The high activity to a synergistic bifunctional mechanism in which Pt provides the adsorption sites for CO, while oxygen adsorbs dissociative on $SnO_2$. The reaction between the adsorbed species occurs at the Pt/$SnO_2$ boundary. The morphological observations were characterized by FESEM and transmission electron microscopy (TEM). $SnO_2$ particles crystallinity was analyzed by the X-ray diffraction (XRD). The surface bonded state of the $SnO_2$ particles and electrode materials were observed by the X-ray photoelectron spectroscopy (XPS). The electric properties of the Pt/$SnO_2$ catalyst for methanol oxidation have been investigated by the cyclic voltametry (CV) in 0.1M $H_2SO_4$ and 0.1M MeOH aqueous solution. The peak current density of methanol oxidation was increased as the $SnO_2$ content in the anode catalysts increased. Pt/$SnO_2$ catalysts improve the removal of CO ads species formed on the platinum surface during methanol electro-oxidation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.58.2-58.2
• /
• 2012

Heavy hydrocarbon reforming is a core technology for "Dirty energy smart". Heavy hydrocarbons are components of fossil fuels, biomass, coke oven gas and etc. Heavy hydrocarbon reforming converts the fuels into $H_2$-rich syngas. And then $H_2$-rich syngas is used for the production of electricity, synthetic fuels and petrochemicals. Energy can be used efficiently and obtained from various sources by using $H_2$-rich syngas from heavy hydrocarbon reforming. Especially, the key point of "Dirty energy smart" is using "dirty fuel" which is wasted in an inefficient way. New energy conversion laboratory of KAIST has been researched diesel reforming for solid oxide fuel cell (SOFC) as a part of "Dirty energy smart". Diesel is heavy hydrocarbon fuels which has higher carbon number than natural gas, kerosene and gasoline. Diesel reforming has difficulties due to the evaporation of fuels and coke formation. Nevertheless, diesel reforming technology is directly applied to "Dirty fuel" because diesel has the similar chemical properties with "Dirty fuel". On the other hand, SOFC has advantages on high efficiency and wasted heat recovery. Nippon oil Co. of Japan recently commercializes 700We class SOFC system using city gas. Considering the market situation, the development of diesel reformer has a great ripple effect. SOFC system can be applied to auxiliary power unit and distributed power generation. In addition, "Dirty energy smart" can be realized by applying diesel reforming technology to "Dirty fuel". As well as material developments, multidirectional approaches are required to reform heavy hydrocarbon fuels and use $H_2$-rich gas in SOFC. Gd doped ceria (CGO, $Ce_{1-x}Gd_xO_{2-y}$) has been researched for not only electrolyte materials but also catalysts supports. In addition, catalysts infiltrated electrode over porous $La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.2}O_3-{\delta}$ and catalyst deposition at three phase boundary are being investigated to improve the performance of SOFC. On the other hand, nozzle for diesel atomization and post-reforming for light-hydrocarbons removal are examples of solving material problems in multidirectional approaches. Likewise, multidirectional approaches are necessary to realize "Dirty energy smart" like reforming "Dirty fuel" for SOFC.

• Korean Journal of Materials Research
• /
• v.26 no.7
• /
• pp.393-399
• /
• 2016

Flower-like nickel oxide (NiO) catalysts were coated on NiCrAl alloy foam using a hydrothermal method. The structural, morphological, and chemical bonding properties of the NiO catalysts coated on the NiCrAl alloy foam were investigated by field-emission scanning electron microscopy, scanning electron microscopy-energy dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, respectively. To obtain flower-like morphology of NiO catalysts on the NiCrAl alloy foam, we prepared three different levels of pH of the hydrothermal solution: pH-7.0, pH-10.0, and pH-11.5. The NiO morphology of the pH-7.0 and pH-10.0 samples exhibited a large size plate owing to the slow reaction of the hydroxide ($OH^-$) and nickel ions ($Ni^+$) in lower pH than pH-11.5. Flower-like NiO catalysts (${\sim}4.7{\mu}m-6.6{\mu}m$) were formed owing to the fast reaction of $OH^-$ and $Ni^{2+}$ by increased $OH^-$ concentration at high pH. Thus, the flower-like morphology of NiO catalysts on NiCrAl alloy foam depends strongly on the pH of the hydrothermal solution.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.327-341
• /
• 2017

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.