• 제목/요약/키워드: Carbon/carbon-based materials

검색결과 1,325건 처리시간 0.026초

가혹 환경이 복합재/Ni-Cr 합금 접착전단강도에 미치는 영향 연구 (Effect of Adhesive Shear Strength of CFRP/Ni-Cr Alloy Under Severe Environmental Condition)

  • 조현태;박성민;김민준;황반토;김학인;손명숙;안종기;안지민;최진호;남영우;권진회
    • Composites Research
    • /
    • 제33권5호
    • /
    • pp.275-281
    • /
    • 2020
  • 본 논문에서는 항공기 팬 블레이드에 적용되는 복합재와 금속 간의 접합 구조물에 대한 온도, 습도에 따른 접착제의 물성 변화에 관해 연구하였다. 항공기 운용 시 노출되는 환경 조건을 고려하여 상온 건조(Room Temperature Dry, RTD), 고온 흡습(Evaluated Temperature Wet, ETW), 저온 건조(Cold Temperature Dry, CTD) 세가지 환경에서 강도 시험을 수행하였다. 접착전단강도 시험은 ASTM D3528을 기준으로 수행하였고, 파손 영역에 대한 마이크로 구조 특성을 SEM이미지를 통해 분석하였다. 연구 결과에 따르면 RTD 환경에서의 전단강도 대비하여 ETW 환경에서 72.8% 저하되었으며, CTD 환경에서는 56.5% 증가되었다. 이는 고온 및 수분 흡습이 접착제의 기계적 특성에 큰 영향을 미치는 것을 확인했고, 저온 환경에서는 모재와 접착제 모두 취성의 증가로 인해 접착 전단 강도가 향상된 것으로 분석되었다.

우분(牛糞)의 유기질비료화(有機質肥料化) 연구(硏究) -II. 속성부숙방법(速成腐熟方法) (Development of Organic Fertilizer based on the Cow Dung -II. Studies on Rapid Fermentation)

  • 임동규;문윤호;신제성;우기대
    • 한국토양비료학회지
    • /
    • 제24권3호
    • /
    • pp.192-199
    • /
    • 1991
  • 우분(牛糞)을 양질(良質)의 유기질비료(有機質肥料)로 제조(製造) 하는데 필수적(必須的)인 속성퇴비제조기술(速成堆肥製造技術)을 개발(開發)하기 위해 3년간(年間)('88~'90년(年)) 우분단독(牛糞單獨)과 우분(牛糞)에 충진제(充嗔劑)(볏짚, 나무껍질, 나무껍질, 톱밥)를 각각(各各) 1:2 부피비로 혼합(混合)한 처리구(處理區)들을 야외(野外)에 퇴적(堆積)한 후(後) 공기흡입장치(空氣吸入裝置)를 이용(利用) 호기적(好氣的) 발효조건(醱酵條件)으로 부숙(腐熟) 시킨후(後) 비닐하우스내(內)에서 후숙시험(後熟試驗)을 실시(實施)한 결과(結果)는 다음과 같다. 1. 부숙기간중(腐熟其間中)(20일간(日間)) 부숙온도(腐熟溫度)는 퇴적후(堆積後) 7~9일(日)에 최고(最高)에 이르렀고 온도상승(溫度上昇) 효과면에서는 '88~'89년(年) 우분(牛糞)+나무껍질구(區) 혹은 우분(牛糞)+나무조각구(區) 및 우분(牛糞)+볏짚구(區)가 우분단독구(牛糞單獨區) 또는 우분(牛糞)+톱밥구(區)에 비해 높았다. 2. 후숙기간중(後熟其間中)(20일간(日間)) 퇴적내(堆積內) 온도(溫度)는 '90년도(年度) 우분구(牛糞區)를 제외(除外)한 각(各) 처리구(處理구)에서 $40^{\circ}C$ 이상(以上) 유지(維持)되었다. 3. 부숙기간중(腐熟其間中) 시료(試料)의 T-C 및 C/N율(率)은 중기(中期)에 높았다가 후기(後期)로 갈수록 낮아졌다. 4. 후숙기간중(後熟其間中) 시료(試料)의 T-N은 전반적(全般的)으로 일정(一定)한 경향(傾向)이 없었으나 T-C 및 C/N율(率)은 부숙기간(腐熟其間)과 동일(同一)한 경향(傾向)을 보였다.

  • PDF

비료원과 멀칭재료에 따른 사과 유묘의 생장 및 토양이화학성 변화 (Growth and Soil Chemical Property of Small Apple Trees as Affected by Organic Fertilizers and Mulch Sources)

  • 최현석;롬컽;이연;조정래;정석규;지형진
    • 한국환경농학회지
    • /
    • 제30권1호
    • /
    • pp.9-15
    • /
    • 2011
  • 본 실험은 비료 공급원으로서 1) 대조구(NF), 2) 상업용 유기질 비료($10N-2P_2O_5-8K_2O$, Nature Safe$^{(R)}$)(CF), 3) 계분 비료(PL)를 포함하였고, 멀칭 공급원으로는 4) 나무껍질 멀칭(WC), 5) 재활용 종이 멀칭(SP), 6) 식물성 퇴비 멀칭(GC), 7) 초생멀칭(GR)을 포함하였다. 유기질 비료와 멀칭의 양은 매해 유기농 사과나무 포장에 시비하였던 (50 g 질소/한 나무, 10 cm 멀칭시용/한 나무) 질소량과 체적에 각각 비례해서 각 포트에 시비하였다. CF, PL, 그리고 GR 급원은 미생물이 유기태 질소를 무기화(N-mineralization) 하는데 이상적인 탄소:질소(30:1이하)비를 보였는데, 처리 후 90일 째 되던 날에 토양중 무기태 질소 농도를 증가시켰다. CF, PL, 그리고 GR 처리된 유묘는 가장 넓은 총 엽면적과 두꺼운 직경, 그리고 큰 수고 및 건물중을 나타내어서 식물생장을 증가시키기 위한 가장 유용한 자재로 평가되었다.

High Loading for Air Pollution in the Byunsan Peninsula of Korea by an Interplay of the Saemangeum Project and Winter Monsoon

  • Ma, Chang-Jin;Kang, Gong-Unn;Kim, Ki-Hyun
    • Asian Journal of Atmospheric Environment
    • /
    • 제6권3호
    • /
    • pp.234-243
    • /
    • 2012
  • The wintertime high loading for atmospheric pollutants is certainly expected in the Byunsan Peninsula of Korea because of a great-scale reclamation project having construction of 33 km tidal sea dike impounding an area of over 40,000 ha and long-range transport. The goal of this study is to trace the origin of this wintertime burden for ambient particulate matter (hereafter called "PM") in the Byunsan Peninsula of Korea. The size-segregated (i.e., cutoff size from 0.01 ${\mu}m$ to 4.7 ${\mu}m$) PM sampling was conducted at a ground-based site of Byunsan Peninsula located in the west coast of Korean Peninsula during the height of dike constructing. Data archived in this study are the mass concentrations of ionic, elemental, and carbonic components in size-fractioned PM. The elemental mass of individual submicrometer particles was also analyzed. The sum of 5-source (i.e., elemental carbon, organic materials, inorganic secondary pollutants, crustal matter, and sea-salts) concentrations shows the bimodal distribution (major and minor peaks formed around $D_p$, 0.65 ${\mu}m$ and $D_p$, 4.7 ${\mu}m$, respectively) by border with 0.19 ${\mu}m$ of cutoff size. The concentrations of EC in $PM_{1.1-0.01}$ in winter and spring times were 4.62 ${\mu}g\;m^{-3}$ and 3.74 ${\mu}g\;m^{-3}$, respectively. Elemental masses of submicron individual particles are classified into two groups, i.e., the major elements (Cl, Al, Si, S, and P) and the minor trace elements. Cluster analysis differentiated the elements in submicron individual particles into 4-cluster. Among them, three clusters are in agreement with the major (Al, Si, S, and P), minor (Fe, Ca, and K), and trace compositions of coal burning. Meanwhile, Cl classified as an independent cluster has different source profile which was mainly due to the Saemangeum seawall project. Some highly toxic elements (e.g., Cr, Mn, and As (and/or Pb)) were also detected in some part of submicron individual PM. As a consequence, the combination of the Saemangeum project and winter monsoon played a considerable part in the double aggravation of wintertime air pollution in the Byunsan Peninsular.

결정화도에 따른 Li3V2(PO4)3 음극의 전기화학적 특성 (Electrochemical Characteristics of Li3V2(PO4)3 Negative Electrode as a Function of Crystallinity)

  • 구준환;박경진;류지헌;오승모
    • 전기화학회지
    • /
    • 제15권1호
    • /
    • pp.27-34
    • /
    • 2012
  • 열처리 온도를 $600^{\circ}C$$800^{\circ}C$로 다르게 하여 비정질 및 결정질구조의 탄소를 포함하는 $Li_3V_2(PO_4)_3/C$분말을 각각 합성하였으며, 결정성에 따른 리튬 이차전지용 음극으로의 특성을 비교하였다. 결정질 $Li_3V_2(PO_4)_3/C$은 추가반응에 의하여 리튬이 저장되기 때문에 260 mAh $g^{-1}$의 제한된 용량만을 지니고 있음에 비하여, 비정질 $Li_3V_2(PO_4)_3/C$는 3가의 바나듐이 금속상태에 근접할 정도로 가역적으로 반응되어 460 mAh $g^{-1}$의 큰가역용량을 발현함을 확인하였다. 이는 비정질 구조에서 기인하는 특성으로 유연한 구조로 인한 새로운 리튬의 저장공간이 확보되는 것 때문이라 할 수 있다. 또한, 비정질 $Li_3V_2(PO_4)_3/C$는 비정질 구조에 기인하는 선형적인 충방전 곡선을 지니고 있어 정확한 충전심도의 예측이 용이할 뿐만 아니라, 결함구조에서 유발된 리튬이온의 향상된 확산성으로 인하여 우수한 속도 특성도 나타내고 있다.

자체-감지능 및 광투과도를 지닌 CNT 및 ITO/PET 다기능성 나노복합소재의 계면 조절 연구 (Interfacial Control of Multi-functional CNT and ITO/PET Nanocomposites having Self-Sensing and Transparency)

  • 왕작가;권동준;구가영;박종만
    • Composites Research
    • /
    • 제24권1호
    • /
    • pp.45-50
    • /
    • 2011
  • 자체-감지능 있는 다기능성 나노복합소재를 위해, 투명하고 전도성 있는 카본나노튜브 (CNT)로 코팅된 폴리에틸렌 테레프탈레이트(PET)를 함침 방법으로 제조하였다. CNT 코팅의 전기적 광학적 특정의 변화는 함침 횟수와 CNT용액의 농도에 주로 의존하였다. 결과적으로, CNT 코팅의 표면저항과 투과도는 제조공정의 변수들에 따라 예민하게 조절되었다. CNT 코팅의 표면저항은 4점법과 이중 배열법에 의해 측정되었으며, 광학적 투과도는 UV 스펙트럼을 사용하여 평가하였다. CNT 코팅의 표면특성을 측정한 정적 및 동적 접촉각은 상호 일치함을 보여주었다. 함침 코팅수가 증가함에 따라, CNT코팅한 PET의 표면저항은 현저하게 저하했으나, 투명도는 CNT 네트워크의 특성으로 거의 감소하지 않았다. CNT와 인듐틴옥사이드 (ITO)의 계면 및 전기적 특성들은 피로 시험을 통하여 비교하였다. CNT는 2000회 반복 후에도 표면저항의 변화가 없는 반면에, ITO는 1000회 반복까지 표면저항의 급격한 증가를 보여주었다가 안정화하였다. 이는 형상비가 큰 CNT는 전기 접촉점을 계속 유지하는 반면에, 취성이 있는 ITO는 미세 균열이 발생하여 전지 접촉점을 많이 상실하기 때문이다.

임플랜트 고정체-지대주 연결부의 형태와 직경이 임플랜트의 기계적 실패에 미치는 영향 (Effect of morphology and diameter of implant fixture-abutment connection on mechanical failure of implants)

  • 윤보혁;신현모;윤미정;허중보;정창모;강은숙
    • 대한치과의사협회지
    • /
    • 제53권9호
    • /
    • pp.644-655
    • /
    • 2015
  • Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.

라만분광법을 이용한 SVM 기반 흑색 플라스틱 자동 분류 시스템의 설계 (Design of Automatic Classification System of Black Plastics Based on Support Vector Machine Using Raman Spectroscopy)

  • 배종수;오성권;김현기
    • 한국지능시스템학회논문지
    • /
    • 제26권5호
    • /
    • pp.416-422
    • /
    • 2016
  • 수많은 플라스틱이 산업분야에 다양하게 사용되어지고 있다. 또한 많은 양의 플라스틱 폐기물들이 발생하고 있다. 재활용에 대한 연구는 환경오염 뿐만아니라 한정된 유용한 자원이 버려지는 것을 방지하기 위해 중요한 이슈로 부각되고 있다. 이렇기 때문에 폐플라스틱의 재활용은 재사용 관점에서 주목받고 있는 실정이다. 현재 재활용 센터에서는 플라스틱의 재질을 분류하기 위해 NIR 센서를 이용한 플라스틱 자동 분류 시스템을 구축 및 운용하고 있다. 하지만 흑색 플라스틱은 여전히 분류가 되지 않는 도전적인 목표로 남아있다. 카본 블랙이 포함된 흑색 플라스틱의 경우 검정색의 특성상 NIR 장비에서 나오는 빛을 흡수하기 때문에 분류에 어려움이 있다. 본 연구는 NIR 장비 대신 흑색 플라스틱을 분류하는 방법에 대한 연구이다. 흑색 플라스틱의 정성적, 정량적 분석을 위해 Raman 분광법을 사용하였다. 또한 분류기의 인식률을 높이기 위해 데이터를 특성을 분석하고 흑색 플라스틱을 좀 더 확실하게 분류하기 위해 Support Vector Machine(SVM), 주성분 분석법(PCA) 같은 알고리즘을 이용하였다.

제강 환원슬래그의 광물탄산화 (The Mineral Carbonation Using Steelmaking Reduction Slag)

  • 류경원;최상훈
    • 자원환경지질
    • /
    • 제50권1호
    • /
    • pp.27-34
    • /
    • 2017
  • 제강 환원슬래그(steelmaking reduction slag)를 출발물질로 사용하여 다양한 농도의 $H_2SO_4$, $NH_4NO_3$(0.3, 0.5, 0.7, 1 M) 용액, 반응온도 $100^{\circ}C$$150^{\circ}C$의 조건에서 Ca 용출 및 탄산화 실험을 실시하였다. 양이온 용출과 탄산화 반응시간은 각각 2시간 및 1시간이었으며 탄산화 효율 증대를 위해 pH는 약 12로 조절하였고 $CO_2$의 부분압은 10 bar이었다. TG 분석결과로부터 탄산화율을 계산한 결과, $H_2SO_4$ 0.5 M과 반응온도 $150^{\circ}C$의 실험 조건에서 약 86%의 고정화율이 관찰되었으나 이 이상의 농도에서는 탄산화율은 급격히 감소하였다. 그러나 $NH_4NO_3$용액을 사용한 결과, 산의 농도가 증가함에 따라 탄산화율도 비례적으로 증가하여 1 M 농도에서 약 93%의 탄산화율이 관찰되었다. 따라서 제강 환원슬래그를 사용한 탄산화반응은 $H_2SO_4$보다는 $NH_4NO_3$용액을 사용할 경우 유리한 것으로 분석되었다. SEM 분석결과, 합성된 아라고나이트는 나무토막 형태(wood piece shape), 둥근형태(round shape), 꽃모양(flower shape)으로 관찰되었으며, 방해석은 결정면이 잘 발달된 능면체형(rhombohedral shape)의 전형적인 형태로 확인되었다.

가막만 표층퇴적물 중 알칼리 및 알칼리 토금속 원소의 생지화학적 특성 (Biogeochemistry of Alkaline and Alkaline Earth Elements in the Surface Sediment of the Gamak Bay)

  • 김평중;박승윤;김상수;장수정;전상백;주재식
    • 해양환경안전학회지
    • /
    • 제18권1호
    • /
    • pp.1-13
    • /
    • 2012
  • 2010년 4월 가막만 전역의 19개 정점에서 표층퇴적물을 채취하여 퇴적물의 입도 분포, 유기물의 기원, 알칼리 원소(Li, Na, K, Rb) 및 알칼리 토금속(Be, Mg, Ca, Sr, Ba)원소의 분포특성을 파악하였다. 조사해역의 퇴적물 유형은 대부분 Mud로 나타났다. Chlorophyll $a$, TOC, TN, TS 및 LOI의 경우 만의 북부해역과 어류양식장이 산재되어 있는 남측해역에서 높은 농도분포를 보였으며, 만의 중앙부에서 낮은 농도를 보였다. 이들 성분과는 반대로 산화환원전위의 경우 만의 중앙부에서 대체로 (+)값으로 산화상태를 나타내었으며, 만의 북부해역과 남측해역에서 (-)상태로 환원환경 특성을 보였다. 유기물의 기원은 대부분 자생기원 유기물질 이였으나, 일부 정점에서 육상 및 박테리아성 유기물 기원 특성을 보였다. 알칼리 및 알카리 토금속 원소 중 Li, Na, K, Rb, Be, Mg, Ca 및 Sr의 경우 대부분의 정점에서 석영희석 효과에 의해 일차적으로 농도 분포가 결정된다. Ba의 경우 본 조사해역에서 중정석(Barite)가 존재하는 것으로 생각되며, Sr 및 Ba의 경우 이차적으로 탄산염 희석과 산화환원전위에 의한 생지화학적 영향을 직간접적으로 받는 것으로 보인다.