• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.371-377
• /
• 2009

The use of polymer insulator has increased all over the world. As of 2000's KEPCO has used it fully since they introduced it in early 1990's. In Korea it is very widely used by KORAIL which uses AC 25 kV system in the ground electric car line. And It is also used in tunnel electric car line to support AT feeder line. But it has not been used in the section of DC 1500 V. In case of DC 1500 V electric railway system It is has been developed by research institutes by means of R&D projects since 2008. The user cleans porcelain insulators regularly by water because of dusts and pollution. In case of polymer insulators It is very easy to be made dirty by pollution because of the material properties and hard to be cleaned by cleansing. In accordance with these reasons It is worried about deterioration. This paper deals with anticipating problems when we apply it to DC electric railway system and the procedure for testing polymer support insulator.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.543-551
• /
• 2014

Objective: The purpose of this study is to identify visual perception of and satisfaction with the orange peel effect of surface. The orange peel effect is a type of finish on painted or coated surface. Background: Gloss paint sprayed on a smooth surface (such as car body, smart phone, and electric home appliances, etc.) should also dry into a smooth surface. Then, a surface resembling the texture of an orange peel can be caused by some factors. The orange peel effect can degrade user's satisfaction with a product. Method: Visual perception and emotional satisfaction were subjectively evaluated using Likert scale. The significance of orange peel effect on visual perception and satisfaction were then analyzed by the analysis of variance. The correlation between visual perception and satisfaction was also analyzed. Results: Surface roughness significantly influenced visual perception and emotional satisfaction. The level of visual perception increased and emotional satisfaction decreased with the increase of orange peel effect. Emotional satisfaction decreased with the increase of visual perception level. Conclusion: It was identified that orange peel phenomenon on surface was a very important factor for emotional satisfaction. The orange peel effect on the surface of a product should be minimized to improve the emotional satisfaction of the product. Application: The result of this study can be applied to the texture design of the body of a car, smart phones, and electric home appliances, etc.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.897-901
• /
• 2005

21 century as the knowledge information anger society now our society industry of all fields the rolling stock maintenance conservative standardization enterprise where information anger is being turning out construction Ministry of Transportation supported with continuous development of the supply section substitution quantity information processing system which the information highway is quick and the Korean railroad technical research worker propelled the enterprise as the subjective agency, it contracted this for a vehicle field information anger system construction in link of the enterprise our construction and an agreement, information technique composed the consortium t9day and it propelled a system codevelopment. The SMSC who is a front-runner of Maj loach city railroad operation agency to 'here business relates with a vehicle field maintenance conservativeness an immediacy operation and generally and information anger it will plan it will integrate it will own jointly and business efficiency and in the dictionary an obstacle occurrence electromotive car maintenance conservative information and it will improve only maintenance conservativeness of preventive maintenance of the electromotive car it knows it will prevent to construct the maintenance conservative system of the preventive maintenance, it applied the RIMS project to sleep.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.89-98
• /
• 2000

Using conventional textile techniques such as weaving braiding knitting and stitching it is possible to produce a wide range two and three dimensional fiber preforms, however so far only a limited attention has been given to knitted fabrics in composite industry. This is mainly due to the opinion that knitted fabric reinforced composites posses low mechanical properties owing to their looped fiber architecture. But it is possible to obtain desired mechanical properties by selecting proper knitted fabric structure, In this paper mechanical characteristics of kevlar plain weft knitted fabrics reinforced plastics(KFRP) are evaluated for th development of intrusion beam of car side door. Tensile bending impact properties of KFRP are measured experimentally and crush demands of Americal Federal Motor Vehicle Safety Standard No.214(FMVSS 214) compared with the bending load and displacement of KFRP by quasi-static test method. The applicability and limitation of bending load and displacement of KFRP according to specimen size has been discussed.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1970-1979
• /
• 1999

This paper proposes an AVI system which recognizes the license plate and the driver's face simultaneously using passive AVI techniques. For this, firstly, the pro-processing algorithm independent of the environment is proposed and region extraction of the car number plate and the driver's face is described. Secondly, characters are separated and recognition parameters are extracted from target regions. Thirdly, template matching of car number plate is performed and the fuzzy relation matrix of driver face is made for the final recognition processes. The merits of the proposed system are following : Pre-processing is accomplished regardless of the environment. The application areas of conventional AVI system can be expanded in the content that the driver's face is also recognized in the proposed system compared with only the number plast is recognized in the existing systems.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.224-230
• /
• 2012

The wearing slider of the rail motor car's pantograph is considerable changed by the type and the material properties. Especially, precipitation and arc influences are main factors decided to life time of wearing slider and contact wire. This study is wearing phenomenon analysis of Cu-type wearing slider with high electric conductivity and resistance arc through experiment by running train. Author observed that wearing phenomenon of Cu-type wearing slider with normal and abnormal wearing characteristics and comparatively analysis precipitation, mileage and weight influences of exchanged Cutype and Fe-type wearing sliders. In this paper result showed that necessity for the application which is the Fe-type of wearing slider had superior wear resisting capacity etc., through tribology approach.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.252-263
• /
• 2016

Road sign is an important street furniture that gives some information such as road conditions, driving direction and condition for a driver. Thus, road sign is a major target of image recognition for self-driving car, ADAS(autonomous vehicle and intelligent driver assistance systems), and ITS(intelligent transport systems). In this paper, an enhanced road sign recognition system is proposed for MMS(Mobile Mapping System) using the single camera and GPS. For the proposed system, first, a road sign recognition scheme is proposed. this scheme is composed of detection and classification step. In the detection step, object candidate regions are extracted in image frames using hybrid road sign detection scheme that is based on color and shape features of road signs. And, in the classification step, the area of candidate regions and road sign template are compared. Second, a Geo-marking scheme for geo-content that is consist of road sign image and coordinate value is proposed. If the serious situation such as car accident is happened, this scheme can protect geographical information of road sign against illegal users. By experiments with test video set, in the three parts that are road sign recognition, coordinate value estimation and geo-marking, it is confirmed that proposed schemes can be used for MMS in commercial area.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.222-229
• /
• 2007

According to the advancement of multimedia compression technologies, high quality multi-media services are easily found in common life. Along with this situation, 5.1-channel audio service also has expanded the application area to home theater system and car theater system and consumer can easily take a chance to experience the feeling of 5.1-channel audio. On the other hand, terrestrial DMB service has been launched in Korea from Dec. 2005 as a handhold multi-media broadcasting service. However, multi-channel audio was not considered due to the insufficiency of bandwidth and the handhold usage. Lately, MPEG is standardizing high efficiency multi-channel audio compression technology for handheld broadcasting service, and several trial for application is introduced in Europe. In this paper, we would like to explain multi-channel audio compression technology, describe the implementation of the verification system for the multi-channel audio service over T-DMB and investigate the possibility of further realization of the service.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.320-327
• /
• 2023

In this study, an FPGA-based sealer inspection system was developed to inspect the sealer applied to install vehicle glass on a car body. The sealer is a liquid or paste-like material that promotes adhesion such as sealing and waterproofing for mounting and assembling vehicle parts to a car body. The system installed in the existing vehicle design parts line does not detect the sealer in the glass rotation section and takes a long time to process. This study developed a line laser camera sensor and an FPGA vision signal processing module to solve this problem. The line laser camera sensor was developed such that the resolution and speed of the camera for data acquisition could be modified according to the irradiation angle of the laser. Furthermore, it was developed considering the mountability of the entire system to prevent interference with the sealer ejection machine. In addition, a vision signal processing module was developed using the Zynq-7020 FPGA chip to improve the processing speed of the algorithm that converted the profile to the sealer shape image acquired from a 2D camera and calculated the width and height of the sealer using the converted profile. The performance of the developed sealer application inspection system was verified by establishing an experimental environment identical to that of an actual automobile production line. The experimental results confirmed the performance of the sealer application inspection at a level that satisfied the requirements of automotive field standards.