• Journal of Distribution Science
• /
• v.18 no.11
• /
• pp.5-13
• /
• 2020

Purpose: This research investigates the cost behavior of the distribution industry. Specifically, we investigate if the ratio of the increase in costs with an increase in sales is consistent with the ratio of the decrease in costs when sales decrease. Traditionally, cost is assumed to be symmetrical. In the case of the distribution industry, it was expected that the downward rigidity of the cost would be shown because it would be very difficult to decide to adjust resources when sales temporarily decrease. Therefore, studies have looked at Korean capital markets based on manufacturing and steel industries. However, no research has been done on the distribution industry. Research design, data, and methodology: To verify the hypothesis of this study, the asymmetry of cost was measured by Anderson et al. (2003). The sample used 28,695 firm-year data from 2002 to 2019 for the KOSPI and KOSDAQ stock markets. Results: The empirical analysis results are as follows. First, asymmetry of cost was observed in the case of the distribution industry. We confirm cost rigidity when sales decreased. Conclusions. This is the first study to look at cost behavior in the distribution industry, and the downward rigidity of cost in the distribution industry is observed.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.557-565
• /
• 2010

Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.905-912
• /
• 2011

In this paper, the method on calculating benefits of combined heat and power is introduced for standard evaluation in electrical power system. This paper calculates benefits about new national viewpoint and viewpoint of independent power producers and assesses benefits of combined heat and power in Korea and In Seoul national capital area. Benefit costs are composed of avoid cost of centralized generation, line upgrading adjustment, loss adjustment and electrical power trade cost per year in earlier study, in addition trade cost of $CO_2$, construction cost of combined heat and power for accurate calculation. Benefit of combined heat and power is calculated by simulation results of real electrical power system.

• KIEAE Journal
• /
• v.12 no.6
• /
• pp.63-68
• /
• 2012

The aim of this study is to evaluate current policies and suggest the way of overcome financial impediments to the energy efficiency function of residential buildings. Based on this analysis the paper enumerates policy recommendations for enhancing how energy efficiency is addressed in building codes and other policies for residential buildings. For achieving this goal, this study conducts the cost-benefit analysis to measure total energy savings and associated total cost. The results of study shows that the cost is greater than the benefit from 1st to 4th year but the benefit will be greater than the cost for the rest of the year. In addition, this study designs a financial support method and an implementation mechanism. Investment from the capital market will take place with the government's interest subsidy. Home retrofit will be undertaken with low interest rate with 2.5% and the return will be paid by a monthly energy bill. The results of this study provides some useful insights for the policy design, including the importance of developing information tools for providing appropriate information to households.

• IE interfaces
• /
• v.18 no.2
• /
• pp.184-192
• /
• 2005

In recent research there has been intense interest in understanding how real option valuation (ROV) approaches might usefully complement conventional discounted cash flow (DCF) techniques. However, investment decision makers in a real world have been worried about adopting the ROV approaches mainly because of difficulty in technically understanding the theory of the ROV approaches as indicated by many researchers. With this difficulty in mind, we propose the opportunity cost model as another discrete-time model to value a deferral option. The main advantage of observing a real options value in terms of the opportunity cost concept is to provide a technique for practitioners to estimate a wide range of real options values without sticking to a financial option modelling. The fundamental ground for developing the opportunity cost model proposed in this paper lies in the work of dissecting the structure of the real options value into three categories: capital gain, expected opportunity loss, and expected opportunity gain. At the end of the paper, we will present a short illustrative example to demonstrate the applicability of the model.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.733-743
• /
• 2016

The purpose of this study is to present a rational depreciation method for a pyroprocess cost calculation. Toward this end, the so-called advanced decelerated depreciation method (ADDM) was developed that complements the limitations of the existing depreciation methods such as the straight-line method and fixed percentage of declining-balance method. ADDM was used to show the trend of the direct material cost and direct labor cost compared to the straight-line or fixed percentage of the declining-balance methods that are often used today. As a result, it was demonstrated that the depreciation cost of the ADDM, which assumed a pyroprocess facility's life period to be 40 years with a deceleration rate of 5%, takes up 4.14% and 27.74% of the pyroprocess unit cost ($781/kg heavy metal) in the $1^{st}$ and final years, respectively. In other words, it was found that the ADDM can cost the pyroprocess facility's capital investment rationally every year. Finally, ADDM's validity was verified by confirming that the sum of the depreciation cost by year, and the sum of the purchasing cost of the building and equipment, are the same.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.259-264
• /
• 2008

A national consultative project entitled "corrosion cost survey in China and preventive strategies" was funded by the Chinese Academy of Engineering in 1998. Soon afterwards, an expert group was organized jointly by the Institute of Metal Research, CAS and Chinese Society of Corrosion and Protection. The report on corrosion cost survey in China was published in 2003. According to this report the overall annual corrosion cost in China estimated by the Uhlig Method and Hoar Method at 1997-2001 was found to be 200.7 billion Yuan RMB and 228.8 billion Yuan RMB respectively, which is equivalent to 2% of the gross national product of China. However the total cost of corrosion including the direct and indirect cost was estimated to be more than 500 billion Yuan RMB per year in China. Among them, corrosion cost of infrastructure ranked in first comparing with other sectors. Although corrosion costs in some sectors, such as electric power, petrochemical, oil pipeline and railway in China has reduced in the past years, significant losses are still being encountered in most sectors of industries and cost-effective methods have not always been implemented. Both successful and unsuccessful cases in corrosion control and corrosion management were collected. As the investment in capital construction continues increasing rapidly in China, the maintenance and life extension of the infrastructures will become a big issue. The preventive strategies have been suggested

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.101-116
• /
• 1976

An attempt is made to analyze the unit nuclear power cost of the Go-ri units 1 and 2 in terms of a set of model data. For the calculational purpose, the power cost is first decomposed into the cost components related to the plant capital, operation and maintenance, working capital requirements, and fuel cycle operation. Then, POWERCO-50 computer code is applied to enumerate the first three components and MITCOST-II is used to evaluate the fuel cycle cost component. The specific numerical results are the fuel cycle cost of Go-ri unit 2 for three alternative fuel cycles presumed, levelized unit power cost of units 1 and 2, and the sensitivity of the power cost to the fluctuation of the model data. Upon comparision of the results with the power cost of the fossil power plants in Korea, it is found that the nuclear power is economically preferred to the fossil power. Nevertheless, the turnkey contract value of Go-ri unit 2 appears to be rather expensive compared with the available data on the construction cost of the PWR plants. Therefore, it is suggested that, in order to make the nuclear power plants more attractive in Korea, the unfavorable contract of such kind must be avoided in the future introduction of the nuclear power plant. Capacity factor is of prime importance to achieving the economic generation of the nuclear electricity from the Go-ri plant. Therefore, it is concluded that more efforts should be directed to make the maximum use of the Go-ri plant.

• Korean Business Review
• /
• v.3
• /
• pp.183-210
• /
• 1990

In this study traditional depreciation method has been analysed carefully and then compared with the depreciation on current cost basis for the purpose of reviewing the basic theory underlying depreciation on current cost basis in view of the current situation demanding new method of depreciation. In this treatise the inevitability of rejecting the basic theory of depreciation and traditional depreciation method has been treated. Furthermore the probable consequence when such refutation of traditional depreciation occurs is studied. How to resolve such problems and what is the basis for claiming for depreciation on current cost basis have been also analysed. Through this analysis and research the following conclusions have been drawn: 1. For the purpose of complete recovery of invested capital depreciation on current cost basis is demanded. 2. For the purpose of undertaking realistic profit computation and accounting to apply to comparison and analysis of business operation depreciation on current cost basis is required. 3. When the feasibility of depreciation on current cost basis is guaranteed' then depreciation on current cost basis can be promoted. 4. Depreciation on current cost basis should be studied from the standpoint of evaluation position.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.640-648
• /
• 2022

In the United States, the Safety Rest Areas (SRAs) were introduced as highway roadside infrastructures in the early 1900s. The State Departments of Transportation (DOTs) operate/maintain their SRAs using different methods. The Washington DOT used the in-house workforce method for over 20 years, whereas some states moved to Performance-Based Contracting (PBC) from the in-house workforce to save cost primarily. Several existing studies claimed that using the PBC approach saved costs on several highway assets. Thus, the principal objective of this study is to compute and compare the unit operating/maintenance cost of SRAs using the in-house workforce method (in Washington state) with the PBC approach (in other states). The findings of this study show that the average annual cost using the PBC approach was much more than the average annual cost using the in-house workforce approach. The findings also show that in Washington state, the 'Labor Cost' category was a key expenditure, which is statistically higher than other categories. The 'Labor Cost' was followed by the 'Other Services', and then 'Materials and Supplies' and 'Equipment.' The study's findings indicated that outsourcing does not always save costs for agencies. The study findings may help transportation construction/maintenance professionals select a cost-effective approach for their future planning.