• Title/Summary/Keyword: Capillary method

Search Result 508, Processing Time 0.022 seconds

Quantitative Determination of Ursolic acid from Prunellae Herba (하고초(夏枯草, Prunellae Herba)로부터 Ursolic acid의 함량 분석)

  • Kim, Ju-Sun;Lee, Kyong-Soon;Chang, Seung-Yeup;Won, Do-Hee;Kang, Sam-Sik
    • Korean Journal of Pharmacognosy
    • /
    • v.31 no.4
    • /
    • pp.416-420
    • /
    • 2000
  • Ursolic acid was isolated from Prunellae Herba (Prunella vulgaris var. lilacina) and identified by direct comparison with an authentic sample. A method of analysis for the evaluation of ursolic acid was developed based on extraction of ground plant material, followed by quantitative determination using capillary gas chromatography of the TMS derivative. Quantitative analysis by GC after derivatisation under mild silylating conditions showed 0.31% ursolic acid in 20 samples collected throughout regions of Korea while no ursolic acid was detected in the samples of the whole plant of Thesium chinense, a substitute for Prunellae Herba in southern regions of Korean peninsula.

  • PDF

An Experimental Study on the Hydration Heat Control of Mass Concrete Using Heat Pipe (히트파이프를 이용한 매스콘크리트의 수화열 제어에 관한 실험 연구)

  • BaeK, Dong-Il
    • Journal of Ocean Engineering and Technology
    • /
    • v.21 no.6
    • /
    • pp.81-86
    • /
    • 2007
  • In order to eliminate the hydration heat of mass concrete, this paper reports the results of hydration heat control in mass concrete using the OCHP (Oscillating capillary tube heat pipe). In the summarized results of the mock up experiments, distributing the heat pipe at 300 mm intervals based on the center of the test specimen was the most effective. A 200 mm turn interval for the heat pipe was measured to be the most appropriate, taking into account the reinforcement placing at the actual site. Therefore, when the hydration heat control method using the heat pipe developed in this study is applied, not only canconstruction efficiency & a reduction in the necessary construction time be expected, but so can outstanding economical effects.

In Situ Microfluidic Synthesis of Monodisperse PEG Microspheres

  • Choi, Chang-Hyung;Jung, Jae-Hoon;Hwang, Taek-Sung;Lee, Chang-Soo
    • Macromolecular Research
    • /
    • v.17 no.3
    • /
    • pp.163-167
    • /
    • 2009
  • This study presents a microfluidic method for the production of monodisperse poly(ethylene glycol) (PEG) microspheres using continuous droplet formation and in situ photopolymerization in microfluidic devices. We investigated the flow patterns for the stable formation of droplets using capillary number and the flow rate of the hexade-cane phase. Under the stable region, the resulting microspheres showed narrow size distribution having a coefficient of variation (CV) of below 1.8%. The size of microspheres ($45{\sim}95{\mu}m$) could be easily controlled by changing the interfacial tension between the two immiscible phases and the flow rates of the dispersed or continuous phase.

Metabolite Profiling of Serum from Patients with Tuberculosis

  • Park, Hee-Bin;Yoo, Min-Gyu;Choi, Sangho;Kim, Seong-Han;Chu, Hyuk
    • Microbiology and Biotechnology Letters
    • /
    • v.49 no.2
    • /
    • pp.264-268
    • /
    • 2021
  • Tuberculosis (TB) is a major infectious disease that threatens the life and health of people globally. Here, we performed a metabolomic analysis of serum samples from patients with intractable TB to identify biomarkers that might shorten the TB treatment period. Serum samples collected at the commencement of patients' treatment and healthy controls were analyzed using the capillary electrophoresis and time-of-flight mass spectrometry metabolome analysis method. The analysis identified the metabolites cystine, kynurenine, glyceric acid, and cystathionine, which might be useful markers for monitoring the TB treatment course. Furthermore, our research may provide experimental data to develop potential biomarkers in the TB treatment course.

Silver elimination effect by sulfuric acid for Ag pre-treated activated carbon

  • Oh, Won-Chun
    • Analytical Science and Technology
    • /
    • v.19 no.2
    • /
    • pp.121-130
    • /
    • 2006
  • In this study, silver pre-treated activated carbons are transformed using sulfuric acid. From the results of adsorption, each isotherm shows a distinct knee band, which is characteristic of microporous adsorbents with capillary condensation in micropores. In order to reveal the causes of the differences in adsorption capacity and specific surface area after the samples were washed with various strengths of sulfuric acid, surface morphology and external pore structure were investigated by SEM. X-ray diffraction patterns indicated that Ag-activated carbons show better performance for silver and silver compounds removal by post-treatment with acid. The FT-IR spectra of silver-activated carbon samples show that the acid post-treatment was consequently associated with the removal of silver with an increased surface functional group containing oxygen of the activated carbon. The type and quality of oxygen groups are determined on the method proposed by Boehm. For the chemical composition microanalysis of silver-activated carbons transformed by post-treatment with sulfuric acid, samples were analyzed by EDX.

The Role of Hydroxyl Radical in the Pathogenetic Mechanism of Endotoxin-Induced Acute Lung Injury in Rats (내독소에 의한 백서의 급성 폐손상에서 Hydroxyl Radical의 병인론적 역할에 관한 연구)

  • Shim, Young-Soo;Yoo, Chul-Gyu;Kim, Young-Whan;Han, Sung-Koo;Kim, Keun-Youl;Han, Yong-Chol
    • Tuberculosis and Respiratory Diseases
    • /
    • v.39 no.2
    • /
    • pp.120-130
    • /
    • 1992
  • Background: Although there have been many studies on the pathogenetic mechanism of acute lung injury, it is still elusive. Recently interests have been focused on the role of oxygen free radicals. But the effect of hydroxyl radical on the neutrophil mobilization and the alveolar-capillary permeability is not clear especially in the endotoxin-induced acute lung injury model of rats. This investigation was performed to evaluate the pathogenetic role of hydroxyl radical on the neutrophil accumulation into the lung and the increased alveolar-capillary permeability in the endotoxin-induced acute lung injury in rats. Method: Fifty rats were divided into four groups: vehicle control group (n=5, 6hrs; n=5, 24hrs), endotoxin-treated group (n=10, 6hrs; n=10, 24hrs), Dimethylthiourea (DMTU)-pretreated group (n=10, 6hrs), and deferoxamine (DFX)-pretreated group (n=10, 6hrs). Thirty minutes before sacrifice, $^{125}I$-tagged bovine serum albumin was injected. Six and twenty four hours after endotoxin injection, the rats were sacrificed, and the radioactivity of lung tissue and peripheral blood was counted. Permeability index was defined as the ratio of radioactivity between lung tissue and peripheral blood. Another set of rats (n=52) were divided into the same four groups as before [vehicle control group (n=5, 6hrs; n=5, 24hrs), endotoxin·treated group (n=7, 6hrs; n=8, 24hrs), DMTU-pretreated group (n=6, 6hrs; n=9, 24hrs), and DFX-pretreated group (n=5, 6hrs; n=7, 24hrs)], and were sacrificed 6 and 24 hours after endotoxin injection. In these rats, cell profile of peripheral blood and bronchoalveolar lavage fluid was evaluated, and the pathologic examination of lung tissue was performed. Results: 1) Increased alveolar-capillary permeability was observed 6 hours after endotoxin injection, which was normalized after 24 hours, and this increase was attenuated by pretreatment with DMTU and DFX. 2) Neutrophil sequestration into the lung was observed 24 hours after endotoxin administration, but this was not influenced by DMTU and DFX pretreatment. Conclusion: These results suggest that hydroxyl radical would not be involved in the sequestration of neutrophils into the lung, but plays an important role in the increase of alveolar-capillary permeability in the endotoxin-induced acute lung injury in rats.

  • PDF

Preparation of Silica Monoliths with Macropores and Mesopores and of High Specific Surface Area with Low Shrinkage using a Template Induced Method

  • Guo, Jianyu;Lu, Yan;Whiting, Roger
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.2
    • /
    • pp.447-452
    • /
    • 2013
  • In this study we report a new method for the synthesis of a silica monolithic column bed with bimodal pores (throughpores and mesopores). The template induced synthesis method was used to direct bimodal pores simultaneously instead of the usual post base-treating method. Block polymer Pluronic F127 was chosen as a dual-function template to form hierarchically porous silica monolith with both macropores and mesopores. This is a simplification of the method of monolithic column preparation. Poly(ethylene glycol) was used as a partial substitute for F127 can effectively prevent shrinkage during the monolith aging process without losing much surface area (944 $m^2/g$ to 807 $m^2/g$). More importantly, the resultant material showed a much narrower mesopore size (centered at 6 nm) distribution than that made using only F127 as the template reagent, which helps the mass transfer process. The solvent washing method was used to remove the remaining organic template, and it was proved to be effective enough. The new synthesis method makes the fabrication of the silica monolithic column (especially capillary column) much easier. All the structure parameters indicate that monolith PFA05 prepared by the above method is a good material for separation, with the merits of much higher surface area than usual commercial HPLC silica particles, suitable mesopore volume, narrow mesopore size distribution, low shrinkage and it is easily prepared.

Spin-coated ultrathin multilayers and their micropatterning using microfluidic channels

  • Hongseok Jang;Kim, Sangcheol;Jinhan Cho;Kookheon Char
    • Korea-Australia Rheology Journal
    • /
    • v.15 no.1
    • /
    • pp.1-7
    • /
    • 2003
  • A new method is introduced to build up organic/organic multilayer films composed of cationic poly(allylamine hydrochloride) (PAH) and negatively charged poly (sodium 4-styrenesulfonate) (PSS) using the spinning process. The adsorption process is governed by both the viscous force induced by fast solvent elimination and the electrostatic interaction between oppositely charged species. On the other hand, the centrifugal and air shear forces applied by the spinning process significantly enhances desorption of weakly bound polyelectrolyte chains and also induce the planarization of the adsorbed polyelectrolyte layer. The film thickness per bilayer adsorbed by the conventional dipping process and the spinning process was found to be about 4 ${\AA}$ and 24 ${\AA}$, respectively. The surface of the multilayer films prepared with the spinning process is quite homogeneous and smooth. Also, a new approach to create multilayer ultrathin films with well-defined micropatterns in a short process time is Introduced. To achieve such micropatterns with high line resolution in organic multilayer films, microfluidic channels were combined with the convective self-assembly process employing both hydrogen bonding and electrostatic intermolecular interactions. The channels were initially filled with polymer solution by capillary pressure and the residual solution was then removed by the .spinning process.

Retrospective study of porcine epidemic diarrhea in Korea by in situ hybridization (In situ hybridization에 의한 돼지 유행성 설사증의 국내발생 역추적 진단)

  • Park, Nam-yong;Lee, Seok-yun
    • Korean Journal of Veterinary Research
    • /
    • v.37 no.4
    • /
    • pp.809-816
    • /
    • 1997
  • In this presented study, we established a method for diagnosis of porcine epidemic diarrhea(PED) by in situ hybridization(ISH), which made distinct progress in diagnostic pathology. We also carried out the retrospective diagnosis through ISH to assume the exact time of the first outbreak and incidence of PED in Korea. The outbreak of PED in Korea reported in 1992. However, since the end of 1980's, some researches of pig-industry have already suspected the outbreak of PED, not transmissible gastroenteritis(TGE). In this experiment, we performed the ISH using 80 formalin-fixed and paraffin-embedded tissues of porcine intestine which were requests for pathological diagnosis from 63 farms whose primary sign was diarrhea from 1984 to 1991. We prepared biotinylated cDNA probe(492base pairs) for ISH by nick translation method and carried out the ISH, using $Microprobe^{TM}$ capillary action system(Fisher $Biotech^R$). We detected PED virus in intestinal mucosa of 2 cases in 1992, 1 case in 1988, and 1 case in 1987. As a result, we assume that the outbreak of PED in Korea have already started since 1987.

  • PDF

Capillary-driven Rigiflex Lithography for Fabricating High Aspect-Ratio Polymer Nanostructures (모세관 리소그라피를 이용한 고종횡비 나노구조 형성법)

  • Jeong, Hoon-Eui;Lee, Sung-Hoon;Kim, Pil-Nam;Suh, Kahp-Y.
    • Journal of the Korean Society of Visualization
    • /
    • v.5 no.1
    • /
    • pp.3-8
    • /
    • 2007
  • We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was raised above the polymer's glass transition temperature ($T_g$) while in conformal contact with a poly(urethane acrylate) (PUA) mold having nano-cavities. Consequently, capillarity forces the polymer film to rise into the void space of the mold, resulting in nanostructures with an aspect ratio of ${\sim}4$. In the second method, very high aspect-ratio (>20) nanohairs were fabricated by elongating the pre-formed nanostructures upon removal of the mold with the aid of tailored capillarity and adhesive force at the mold/polymer interface. Finally, these two methods were further used to fabricate micro/nano hierarchical structures by sequential application of the molding process for mimicking nature's functional surfaces such as a lotus leaf and gecko foot hairs.