• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2008

The purpose of this study is to present a methodology to estimate the capacity of the pressure relief valve which prevents overpressure of the pressure vessel in a cold state. In this methodology, the transient behavior of the flow rate through the pressure relief valve and the pressure inside the pressure vessel are considered. The result of this study shows the followings; The more the relief valve capacity is considered in excess, the more the initial relief flow rate and the initial pressure inside the pressure vessel are high and low respectively. When the relief valve capacity is determined properly, the pressure inside the pressure vessel maintains almost the same value, so the ASME code requirement will be met.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.170-172
• /
• 2005

Internal battery ohmic measurements have been a hot topic amongst battery users and battery manufacturers. As a battery deteriorates and loses its capacity, the internal resistance of the battery increases. Everyone seems to agree that measuring the internal parameters of a cell can be very useful in determining a battery's state of health. In this paper experiences show that if a cell's resistance increases by more than25% above its baseline value(known good resistance of new 100% capacity cell), the cell will no loger be able to deliver 80% or more of the rated capacity.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.485-487
• /
• 1995

This paper proposes a GAs-applied method for power system planning using series capacitors in order to control the flow of power as desired and utilize the existing transmission facilities to its transfer capacity limits. The control strategy problem is formulated as optimization problem. Also, in employing genetic algorithms to solve the optimization problems, real variable-based genetic algorithm is presented to save the coding processing time and obtain more accurate value of the variable. An application to IEEE 57-bus test system proves that the proposed method is effective for improvement of power system transfer capacity.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.125-132
• /
• 1998

Protein affinity membrane was prepared via the coating of chitosan gel on the porous flat polysulfone membrane surface, followed by the immobilization f the reactive dye (Cibacron Blue 3GA) to the chitonsan gel. The maximum protein binding capacity of affinity membrane was about 70${\mu}g/cm^2$ determined by the batch adsorption experiments of human serum albumin (HSA). Using module of this membrane, the characteristics of protein chromatography were investigated through the experiments of elution and frontal chromatography of HSA. This membrane module promises as a chromatography column, since it represented a lower pressure drop and a greater reproducibility. The protein separation ratio was significantly influenced by the flow rate of mobile phase and the injection quantity of HSA. The dynamic protein binding capacity of module decreased from the equilibrium binding capacity with increasing flow rate and approached the value of 15 - 20 ${\mu}g/cm^2$ for flow rates above 6 mL/min.

• Structural Engineering and Mechanics
• /
• v.74 no.2
• /
• pp.267-282
• /
• 2020

The seismic performance and failure modes of the dual system of moment resisting frames and thin steel plate shear walls (TSPSWs) without and with one or two outrigger trusses are studied in this paper. These structural systems were utilized to resist vertical and lateral loads of 40-storey buildings. Detailed Finite element models associated with nonlinear time history analyses were used to examine seismic capacity and plastic mechanism of the buildings. The analyses were performed under increased levels of earthquake intensities. The models with one and two outriggers showed good performance during the maximum considered earthquake (MCE), while the stress of TSPSWs in the model without outrigger reached its ultimate value under this earthquake. The best seismic capacity was in favour of the model with two outriggers, where it is found that increasing the number of outriggers not only gives more reduction in lateral displacement but also reduces stress concentration on thin steel plate shear walls at outrigger floors, which caused the early failure of TSPSWs in model with one outrigger.

• The Korean Journal of Physiology
• /
• v.6 no.1
• /
• pp.39-42
• /
• 1972

This study was carried out on the energy expenditure and physical capacity of 504 persons from 17 occupations. The energy expenditure was measured by indirect calorimetry using a Douglas' bag and Scholander's gas analyser. The physical capacity was determined by the Harvard's step test and the maximum oxygen consumption using a treadmill. The assessment of the daily energy expenditure for each subject was made by the factorial method using a record of the activies throughout 24 hours of every survey day. The total daily energy expenditure is the sum of all energy expenditure. This was calculated by multiplying the caloric value of the metabolic rate by the time spent on each activity. Most of the occupations involved moderate or heavy work.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.461-467
• /
• 1998

A fermentation system was supplemented with a device for the measurement of the durations of alkali pump feeding for automatic pH control and an A/D convertor for precise monitoring of pH value by computer. A software program was developed to measure buffer capacities from the pH signal and the pH control signal during fermentation. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed correlation to those of estimated by the software sensor. Lacitic acid production was also successfully estimated by the values of buffer capacities measured on-line.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.243-249
• /
• 2000

In case of the limitation of Deep RIE fabrication for Micro Gas Turbine, bearing aspect ratio is limited in very small value. The characteristics such as pressure distribution load capacity and non-linearity of a short bearing of L/D=0.083 and a conventional bearing of L/D=1.0 with coupled boundary effects are investigated far Micro Gas Tlubine bearings. The coupled efffect was analyzed by mass conservation at coupled end area. The results, increasing load capacity and non-linearity due to the coupled effect of thrust and journal bearing, are obtained and the selection of journal bearing type is discussed.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1358-1371
• /
• 2017

Dynamic thermal rating (DTR) system is an effective method to improve the capacity of existing overhead line. According to the methodology based on CIGRE (International Council on Large Electric systems) standard, ampacity values under steady-state heating balance can be calculated from ambient environmental conditions. In this study, simulation analysis of relations between parameters and ampacity is described as functional dependence, which can provide an effective basis for the design and research of overhead transmission lines. The simulation of ampacity variation in different rating scales is described in this paper, which are determined from real-time meteorological data and conductor state parameters. To test the performance of DTR in different rating scales, capacity improvement and risk level are presented. And the experimental results show that the capacity of transmission line by using DTR has significant improvement, with low probability of risk. The information of this study has an important reference value to the operation management of power grid.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.167-172
• /
• 1991

The contents of dietary fiber and its physical properties of vegetables were determined. The samples selected in this study were soybean sprouts (Glycine max MERILL sprouts) butterber (Petasites japonicus MIQ), taro stem(Colcasia antiquorum SCHOTT stem), bracken (Pteridium aquilinum KUHN)and dried Korean cabbage leaves(Brassica compestris L.leaves). The contents of dietary fiber were 20.96~50.62% of neutral detergent figer, 10.60-38.19% of acid detergent fiber, 1.74-10.88% of lignin, 5.79~33.29% of hemicellulose and 5.79-33.29% of cellulose. Butterber had the highest dietary fiber content. Mean waterholding capacity of samples was 5.65-12.26g.water/g.acetone dried powder and butterber and dried Korean cabbage leaves had higher water holding capacity value than the others. Densities were 140-250mg/ml of direct density and 385-417 mg/ml of bulk density.