• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.55-63
• /
• 2024

Purpose : The purpose of this study is to determine the effects of scapula and pelvis symmetrical reciprocal pattern exercise of PNF concept on respiratory function and quality of life in elderly subjects. Methods : Nineteen elderly subjects with healthy were recruited. Subjects performed scapula and pelvis symmetrical reciprocal pattern exercise of PNF concept. Exercise was appied 30 minutes three times per week for four weeks. The respiratory function and quality of life (QOL) test three times (before, two weeks, and four weeks). Respiratory function includes forced vital capacity (FVC), forced expiratory volume at one second (FEV₁), Peak Expiratory Flow (PEF) and chest cage expansion test (CCET). The QOL test was measured Korean WHOQOL-BRIEF. The analysis method was analyzed through the one-way ANOVA repeated methods, and the statistical significance is α=.05. It was analyzed through the post test Bonferroni test. Results : After the 4 week scapula and pelvis symmetrical reciprocal pattern exercise of PNF concept showed statistically significant differences in the respiratory function (FVC, FEV₁, PEF, and CCET), and QOL (p<.05). As a result of the post-hoc test, FVC showed a significant increase in the mid test and post test compared to the pre test (p<.05), FEV₁ showed a significant increase in the post test compared to the pre test (p<.05). PEF showed a significant increase in all pre-test, mid-test, and post-test sections (p<.05), CCET showed a significant increase in all pre-test, mid-test, and post-test sections (p<.05). QOL showed a significant increase in all pre-test, mid-test, and post-test sections (p<.05). Conclusion : In this study, the scapula and pelvis symmetrical reciprocal pattern exercise of PNF concept improved respiratory function and QOL. The findings suggest that this intervention could be beneficial in improving respiratory function and QOL in the elderly.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.53-63
• /
• 2013

Bored pre-cast piles using PHC piles is widely used in foundation of building structures constructed in urban areas because noise and vibration due to pile installation are low. However, since slime is formed at the base of borehole and the density of bearing stratum surrounding the base of borehole is decreased due to stress relaxation in drilling process of bored pre-cast pile method, the base load capacity of bored pre-cast piles is very low compared to the strength of bearing stratum. In this study, a new type of PHC pile, which short steel pipe with the same diameter as the PHC pile is attached to the pile tip, is developed to increase the base load capacity of bored pre-cast piles. In order to check the effect of the use of new PHC pile on the base load capacity of bored pre-cast piles, field pile load tests are performed for bored pre-cast piles using the new and existing PHC piles. Results of the pile load tests show that the new PHC pile gives higher base load capacity to bored pre-cast piles than the existing PHC pile, since the tip of new PHC pile is penetrated to undisturbed bearing stratum passing through the slime at the base of borehole and the loosened bearing stratum under the slime by pile driving using light hammer.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.91-103
• /
• 2015

Purpose: The purpose of this study was to investigate the effects of home exercise program and exercise program of round shoulder adjustments on the level of trapezius muscle activity and attention capacity for middle school students. Method: The participants in this study were composed of 21 middle school students. We made the students lie on the floor in prone position, then measured the height of their acromion from the floor. We chose participants for our study whose measurement values were over 2.5cm. We divided them into two groups, one is for the experimental group, and the other is for the control group. The experimental group exercised three days a week for 6 weeks, including home training, and the control group didn't exercise. We used EMG to measure the trapezius muscle's activity and used a Stroop test for the measurement of the students' attention capacity. Results: The results of our study are as follows. There was no significant difference between the experimental group and the control group. However, there was a significant difference within the experimental group when comparing pre and post training results for Trapezius muscle activity and attention capacity. Conclusion: We found that correcting round shoulder symptom increases the Trapezius muscle activity and students' attention capacity. Future experiments should investigate with systemical management. Also, we need to increase the frequency of the exercise and participants.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.57-74
• /
• 2022

The purpose of this study is to verify the influence of SME members' motivation and creative working environment on innovative behavior and to see differences according to individual absorptive capacity. As a research method for this, 350 copies were collected by requesting a specialized research company for employees who have worked at SMEs for more than a year, and research models and hypotheses were verified with SPSS 28 and Smart PLS 3. As a result of the study, approach motivation and creative work environment had a positive effect on individual innovation behavior, which showed significant differences according to individual absorptive capacity. The implications of this study are summarized as follows. First, for innovative organizational management in SMEs where human resources are more important than physical resources, SMEs need to provide a creative working environment and motivate members to derive positive innovative behavior. Second, innovation behavior differs depending on personal absorptive capacity, and innovation behavior becomes the subject of corporate growth, indicating that various interests and support are needed to increase personal absorptive capacity along with positive motivation for members.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2015

We studied the compact anode design to develop 100 kW rotating anode X-ray tube with large focal spot 1.2 mm, small focal spot 0.6 mm and tube voltage 150 kV for large hospital digital radiography using computer thermal simulation. The larger thermal radiation effect in a high vacuum can reduce the temperature of anode so the method to increase the surface area of anode is investigated. The anode has the multi-tier shape at the back side of TZM body of anode and also bigger diameter of anode. The number of multi-tiers was varied from 6 to 15 and the diameter of anode was also varied from ${\Phi}74$ to ${\Phi}82$. From ANSYS transient thermal simulation result, we could obtain $1056.4^{\circ}C$ anode maximum temperature when applying 100 kW input power at 0.1 second on target focal track which is less than $1091^{\circ}C$ of the conventional 75 kW X-ray tube with reduced anode weight by 15.5% than the conventional anode. The compact anode of reduced anode weight is able to improve the unwanted noise when the rotor is rotating at high-speed and also reduce the rotational torque which the cost effective stator-coil is possible. It is believed that the anode with 15 ea multi-tiers using ${\Phi}82$ can satisfy with the specification of the anode heat capacity. From the results of this paper, it has been confirmed that the proposed compact anode can be used as the anode of 100 kW rotating anode X-ray tube for digital radiography.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.511-516
• /
• 2004

A Li$[Co_{0.17}Li_{0.28}Mn_{0.55}]O_2$ cathode compound was prepared by a simple combustion method. The X-ray diffraction pattern showed that this compound could be classified as ${\alpha} -NaFeO_2$ structure type with the lattice constants of a = 2.8405(9) ${\AA}$ and c = 14.228(4) ${\AA}$. According to XANES analysis, the oxidation state of Mn and Co ions in the compound were 4+ and 3+, respectively. During the first charge process, the irreversible voltage plateau at around 4.65 V was observed. The similar voltage-plateau was observed in the initial charge profile of other solid solution series between $Li_2MnO_3\;and\;LiMnO_2$ (M=Ni, Cr...). The first discharge capacity was 187 mAh/g and the second discharge capacity increased to 204 mAh/g. As the increase of cycling number, one smooth discharge profile was converted to two distinct sub-plateaus and the discharge capacity was slowly decreased. From the Co and Mn K-edge XANES spectra measured at different cyclic process, it can be concluded that irreversible transformation of phase is occurred during continuous cycling process.

• Geomechanics and Engineering
• /
• v.7 no.5
• /
• pp.477-493
• /
• 2014

This study examines the behaviour of single micropiles subjected to axial tension or compression load in collapsible loess under in-situ moisture content and saturated condition. Five tension loading tests and five compression loading tests on single micropiles were carried out at a typical loess site of the Loess Plateau in Northwest China. A series of laboratory tests, including grain size distribution, specific gravity, moisture content, Atterberg limits, density, granular components, shear strength, and collapse index, were carried out during the micropile loading tests to determine the values of soil parameters. The loess at the test site poses a severe collapse risk upon wetting. The tension or compression load-displacement curves of the micropiles in loess, under in-situ moisture content or saturated condition, can generally be simplified into three distinct regions: an initial linear, a curvilinear transition, and a final linear region, and the bearing capacity or failure load can be interpreted by the L1-L2 method as done in other studies. Micropiles in loess should be considered as frictional pile foundations though the tip resistances are about 10%-15% of the applied loads. Both the tension and compression capacities increase linearly with the ratio of the pile length to the shaft diameter, L/d. For micropiles in loess under in-situ moisture content, the interpreted failure loads or capacities under tension are 66%-87% of those under compression. However, the prewetting of the loess can lead to the reductions of 50% in the tensile bearing capacity and 70% in the compressive bearing capacity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.3
• /
• pp.217-223
• /
• 2018

Overfishing capacity has become a global issue due to over-exploitation of fisheries resources, which result from excessive fishing intensity since the 1980s. In the case of Korea, the fishing effort has been quantified and used as an quantified index of fishing intensity. Fisheries resources of coastal fisheries in the Korean waters of the East Sea tend to decrease productivity due to deterioration in the quality of ecosystem, which result from the excessive overfishing activities according to the development of fishing gear and engine performance of vessels. In order to manage sustainable and reasonable fisheries resources, it is important to understand the fluctuation of biomass and predict the future biomass. Therefore, in this study, we forecasted biomass in the Korean waters of the East Sea for the next two decades (2017~2036) according to the changes in fishing intensity using four fishing effort scenarios; $f_{current}$, $f_{PY}$, $0.5{\times}f_{current}$ and $1.5{\times}f_{current}$. For forecasting biomass in the Korean waters of the East Sea, parameters such as exploitable carrying capacity (ECC), intrinsic rate of natural increase (r) and catchability (q) estimated by maximum entropy (ME) model was utilized and logistic function was used. In addition, coefficient of variation (CV) by the Jackknife re-sampling method was used for estimation of coefficient of variation about exploitable carrying capacity ($CV_{ECC}$). As a result, future biomass can be fluctuated below the $B_{PY}$ level when the current level of fishing effort in 2016 maintains. The results of this study are expected to be utilized as useful data to suggest direction of establishment of fisheries resources management plan for sustainable use of fisheries resources in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.107-116
• /
• 2007

The introduction of new renewable energy is going on increase with the second plan of the Korean Government "Technology Development, Utilization and Popularization of New Renewable Energy". In general, it is connected to the power system due to the nature of it's source characteristics but it's interconnection operation impacts on the power system planning and operation. The operation schemes of the existing power distribution system are based on the unidirectional power flow, but unidirectional power flow changes to bidirectional power flow due to the interconnection operation of new renewable energy. It degrade the existing protection coordination system and power quality of the power distribution system. Thus, the technical evaluation process of the interconnection of new renewable energy are necessary. In this paper, the characteristics of the existing automatic recloser and sectionalizer are reviewed and interconnection capacity evaluation method of the DR(distributed resources) in the existing automatic recloser-sectionalizer protective coordination system are proposed.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.6
• /
• pp.177-186
• /
• 2020

Recent advances in deep learning technology have improved image recognition performance in the field of computer vision, and serverless computing is emerging as the next generation cloud computing technology for event-based cloud application development and services. Attempts to use deep learning and serverless computing technology to increase the number of real-world image recognition services are increasing. Therefore, this paper describes how to develop an efficient deep learning based image recognition service system using serverless computing technology. The proposed system suggests a method that can serve large neural network model to users at low cost by using AWS Lambda Server based on serverless computing. We also show that we can effectively build a serverless computing system that uses a large neural network model by addressing the shortcomings of AWS Lambda Server, cold start time and capacity limitation. Through experiments, we confirmed that the proposed system, using AWS Lambda Serverless Computing technology, is efficient for servicing large neural network models by solving processing time and capacity limitations as well as cost reduction.