• 한국지반공학회논문집
• /
• 제23권9호
• /
• pp.39-49
• /
• 2007

본 연구에서는 수치해석을 통해 말뚝캡의 강성에 따른 거동차이를 분석하였다. 따라서 강성캡과 연성캡을 선정하여 상부교각과 하부군말뚝기초를 일체화하여 일련의 해석을 수행하였다. 해석 시 캡강성에 영향을 주는 캡의 탄성계수와 두께, 상부 교각길이, 지반반력, 그리고 말뚝직경 등을 고려하였다. 본 연구결과 군말뚝내 개별말뚝에 작용하는 하중은 말뚝캡의 강성에 크게 좌우되었으며 그 결과, 연성캡 해석결과는 강성캡에 비하여 수평하중과 휨모멘트가 상대적으로 크게 발생하므로 좀 더 보수적인 설계가 가능하리라 판단된다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권9호
• /
• pp.337-346
• /
• 2015

사물인터넷(Internet of Things, IoT) 환경의 다양한 프로토콜, 도메인, 애플리케이션 위에서 유연한 서비스 제공을 위한 효율적인 사용자 권한 관리 방법이 필요하다. 본 논문은 IoT 환경의 다양한 서비스에 대한 효율적인 접근제어를 제공하기 위하여 CapSG(Capability Service Gateway)를 이용한 IoT 서비스 플랫폼을 제안하였다. CapSG는 인증과 접근 권한을 포함하는 토큰을 사용하여, 서비스 주체에 대한 인증 및 접근제어를 수행하여 서비스를 제공한다. 또한, 서비스 토큰 관리를 위한 생성, 위임, 폐기, 거절 등의 기능을 제공한다. 본 논문은 각 도메인에 대한 토큰 그룹을 사용함으로써 도메인별 서비스 접근제어가 가능하며, 토큰 그룹 내의 특정 서비스 토큰을 이용한 접근제어 수행도 가능하도록 설계하여 IoT의 다양한 서비스 요구에 대한 접근제어의 유연성과 효율성을 제공한다.

• Earthquakes and Structures
• /
• 제20권1호
• /
• pp.87-96
• /
• 2021

Ground motions recorded in near-fault sites, where the rupture propagates toward the site, are significantly different from those observed in far-fault regions. In this research, finite element modeling is used to investigate the effect of pile cap stiffness on the seismic response of soil-pile-structure systems under near-fault ground motions. The Von Wolffersdorff hypoplastic model with the intergranular strain concept is applied for modeling of granular soil (sand) and the behavior of structure is considered to be non-linear. Eight fault-normal near-field ground motion records, recorded on rock, are applied to the model. The numerical method developed is verified by comparing the results with an experimental test (shaking table test) for a soil-pile-structure system. The results, obtained from finite element modeling under near-fault ground motions, show that when the value of cap stiffness increases, the drift ratio of the structure decreases, whereas the pile relative displacement increases. Also, the residual deformations in the piles are due to the non-linear behavior of soil around the piles.

• Computers and Concrete
• /
• 제6권5호
• /
• pp.377-390
• /
• 2009

In this paper an improved one-dimensional frame element for modelling of reinforced concrete beams and columns subjected to impact is presented. The model is developed in the framework of a flexibility fibre element formulation that ignores the shear effect at material level. However, a simple shear cap is introduced at section level to take account of possible shear failure. The effect of strain rate at the fibre level is taken into account by using the dynamic increase factor (DIF) concept for steel and concrete. The capability of the formulation for estimating the element response history is demonstrated by some numerical examples and it is shown that the developed 1D element has the potential to be used for dynamic analysis of large framed structures subjected to impact of air blast and rigid objects.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1178-1187
• /
• 2006

The purpose of this study is to conduct a questionnaire survey on the actual conditions of the working uniform and protective equipment put on by street cleaners, then to identify their inconvenience and problems and to draw solutions to improve them, and finally to design a spring-and-autumn street cleaner uniform which has enhanced functionalities such as motional flexibility, safety and soil proof. The questionnaire survey of this study was done by street cleaners who were in charge of street cleaning and collecting the recyclable waste. The result of this study, easily worn-out parts of the working clothing were the sleeve hems and the front part on the upper uniform, and the trouser hems and zipper on the lower uniform. Easily soiled parts were the sleeve hems, parts of arm on the upper uniform, and the trouser hems and knee parts on the lower uniform. Based on the results of the questionnaire survey, the sample uniforms were designed in consideration of material, design and pattern. A soil-proof material was used for easily soiled parts such as sleeve hems, knee parts and trouser hems. Reflective material was applied to the parts such as chest, back and the side lines of sleeves and trousers to raise visibility in working and to ensure safety. A crease was given to each side of the back. The height of sleeve cap was lowered to lift the motional flexibility of back and arm parts. Darts were applied to elbow and knee parts for a three-dimensional design. Gussets were inserted in the thigh part to give it activity. Then quantitative evaluation and a sensory evaluation, which was composed of outward appearance, motional flexibility and fitness for field operation, were conducted. According to these evaluations, the sample uniform was found to be more satisfactory than current uniform.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2006년도 Principles and Practice of Microarray for Biomedical Researchers
• /
• pp.30-36
• /
• 2006

Tissue microarray (TMA) is an array-based technology allowing the examination of hundreds of tissue samples on a single slide. To handle, exchange, and disseminate TMA data, we need standard representations of the methods used, of the data generated, and of the clinical and histopathological information related to TMA data analysis. This study aims to create a comprehensive data model with flexibility that supports diverse experimental designs and with expressivity and extensibility that enables an adequate and comprehensive description of new clinical and histopathological data elements. We designed a Tissue Microarray Object Model (TMA-OM). Both the Array Information and the Experimental Procedure models are created by referring to Microarray Gene Expression Object Model, Minimum Information Specification For In Situ Hybridization and Immunohistochemistry Experiments (MISFISHIE), and the TMA Data Exchange Specifications (TMA DES). The Clinical and Histopathological Information model is created by using CAP Cancer Protocols and National Cancer Institute Common Data Elements (NCI CDEs). MGED Ontology, UMLS and the terms extracted from CAP Cancer Protocols and NCI CDEs are used to create a controlled vocabulary for unambiguous annotation. We implemented a web-based application for TMA-OM, supporting data export in XML format conforming to the TMA DES or the DTD derived from TMA-OM. TMA-OM provides a comprehensive data model for storage, analysis and exchange of TMA data and facilitates model-level integration of other biological models.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1486-1491
• /
• 2018

In recent years, mica has been successfully used as a substrate for the growth of flexible epitaxial ferroelectric oxide thin films. Here, we systematically investigated the flexibility of mica in terms of its thickness, repeated bending/unbending, extremely hot/cold conditions, and successive thermal cycling. A $20-{\mu}m-thick$ sheet of mica is flexible even up to the bending radius of 5 mm, and it is durable for 20,000 cycles of up- and down-bending. In addition, the mica shows flexibility at 10 and 773 K, and thermal cycling stability for the temperature variation of ca. 400 K. Compared with the widely used flexible polyimide, mica has a significantly higher Young's modulus (ca. 5.4 GPa) and negligible hysteresis in the force-displacement curve. These results show that mica should be a suitable substrate for piezoelectric energy-harvesting applications of ferroelectric oxide thin films at extremely low and high temperatures.

• 한국기후변화학회지
• /
• 제9권4호
• /
• pp.325-342
• /
• 2018

The Korea Emissions Trading Scheme ( K-ETS), which manages roughly 70% of the greenhouse gas emissions in South Korea, was initiated in 2015, after implementation of its 1st basic plan and the 1st allocation plan (2014) for the 1st phase (2015-2017). During the three and a half years since the launch of K-ETS, there have been critical policy change such as adjustment of the institutions involved, development and revision of the 2030 national GHG reduction roadmap, and change in the allocation plans. Moreover, lack of liquidity and fluctuation of carbon prices in the K-ETS market during this period has forced the Korean government to adjust the flexibility mechanism and auction permits of the market stability reserve. To evaluate the policy change in the K-ETS regarding conformance to its objectives, this study defines three objectives (Environmental Effectiveness, Cost Effectiveness and Economic Efficiency) and ten indicators. Evaluation of Environmental Effectiveness of K-ETS suggests that the national GHG reduction roadmap, coverage of GHG emitters and credibility of MRV positively affect GHG mitigation. However, there was a negative policy change implemented in 2017 that weakened the emission cap during the 1st phase. In terms of the Cost Effectiveness, the K-ETS policies related to market management and flexibility mechanism (e.g. banking, borrowing and offsets) were improved to deal with the liquidity shortage and permit price increase, which were caused by policy uncertainty and conservative behavior of firms during 2016-2018. Regarding Economic Efficiency, K-ETS expands benchmark?based allocation and began auction-based allocation; nevertheless, free allocation is being applied to sectors with high carbon leakage risk during the 2nd phase (2018-2020). As a result, it is worth evaluating the K-ETS policies that have been developed with respect to the three main objectives of ETS, considering the trial?and?error approach that has been followed since 2015. This study suggests that K-ETS policy should be modified to strengthen the emission cap, stabilize the market, expand auction-based allocation and build K-ETS specified funds during the 3rd phase (2021-2025).

• 한국의류학회지
• /
• 제31권1호
• /
• pp.77-84
• /
• 2007

The purpose of this study was to investigate and to compare the performances of silicone laminated materials sold for swimming cap in market, to get the basic data for product development. We selected 4 specimens and tested their air permeability, waterproofness and breathability. We also tested the physical and mechanical properties of the specimens using KES system. Silicone-laminated material was not bursted on high hydraulic pressure since silicone membrane gave waterproofness while PU/Polyester substrate gave elasticity. It didn't have air permeability and breathability at all. Any toxic materials such as Formaldehyde, Deldrin, PCP, Amin, TDBPP were not detected in silicone-laminated material and other materials. Silicone-laminated material had higher stretchability with the low force but it had lower elastic recovery and shape stability comparing to PU laminated material. It had lower flexibility than PU laminated material. It had lower unrecoverable amount in shearing direction. Friction coefficient was higher in silicone-laminated material than PU laminated material due to its surface stickiness. It was compressed easily and its compression resiliency was higher with compared to PU laminated material.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (B)
• /
• pp.1-6
• /
• 2007

서열을 분석하고, 기능을 예측하는 서열 주해는 생명 현상 규명을 위한 필수 과정이다. 서열 주해는 다수 응용 프로그램간 상호 연계를 통한 복잡한 처리 과정을 거쳐 이루어진다. 현재 사용자는 다양한 응용 프로그램들 중 적합한 응용 프로그램을 선택한 후, 운영환경에 맞도록 설치하고, 사용법을 익혀야 한다. 또한 각 프로그램들의 연계를 위해 입출력 데이터 형식을 변환해야 하는 불편함이 있다. 이를 위해 자동화된 솔루션들이 개발되고 있지만, 각 단계별 프로그램들이 강결합(tightly coupled)되어 있어 유연성(flexibility)이 떨어지고, 기능의 확장 및 변경에 어려움이 있다. 본 논문에서는 기존 시스템들의 한계를 극복하기 위하여 SOA (Service Oriented Architecture) 기반의 서열 주해 시스템인 SeqWeB을 제안한다. SeqWeB은 서열 주해에 필요한 7개의 응용 프로그램(Phred, cross_match, RepeatMasker, ICAtools, Phrap, CAP3, Blast)들을 웹 서비스 기술을 통해 단위 서비스로 개발하고, BPM 기법을 이용하여 통합하였다. SeqWeB은 각 응용 프로그램간 상호 운용성을 높이기 위하여 XML 형식의 입/출력 데이터를 사용하며, SOA 기반의 시스템 통합으로 각 응용 프로그램들을 약결합(loosely coupled)하여 시스템의 확장 및 변경이 용이하다. 또한 웹을 기반으로 하는 다양한 조합의 서열 주해 솔루션 제공이 가능한 특징이 있다.