Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Analysis of RC beams subjected to shock loading using a modified fibre element formulation

  • Valipour, Hamid R. (Centre for Infrastructure Engineering and Safety(CIES), School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Huynh, Luan (Centre for Infrastructure Engineering and Safety(CIES), School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Foster, Stephen J. (Centre for Infrastructure Engineering and Safety(CIES), School of Civil and Environmental Engineering, The University of New South Wales)
  • Received : 2009.04.08
  • Accepted : 2009.08.13
  • Published : 2009.10.25
⟨ Previous Next ⟩

Abstract

In this paper an improved one-dimensional frame element for modelling of reinforced concrete beams and columns subjected to impact is presented. The model is developed in the framework of a flexibility fibre element formulation that ignores the shear effect at material level. However, a simple shear cap is introduced at section level to take account of possible shear failure. The effect of strain rate at the fibre level is taken into account by using the dynamic increase factor (DIF) concept for steel and concrete. The capability of the formulation for estimating the element response history is demonstrated by some numerical examples and it is shown that the developed 1D element has the potential to be used for dynamic analysis of large framed structures subjected to impact of air blast and rigid objects.

Keywords

References

  1. Abbas, H., Gupta, N.K. and Alam, M. (2004), "Nonlinear response of concrete beams and plates under impact loading", Int. J. Impact Eng., 30(8-9), 1039-1053. https://doi.org/10.1016/j.ijimpeng.2004.06.011
  2. Banthia, N., Mindess, S., Bentur, A. and Pigeon, M. (1989), "Impact testing of concrete using a drop-weight impact machine", Exp. Mech., 29(1), 63-69. https://doi.org/10.1007/BF02327783
  3. Bathe, J.K. and Ramaswamy, S. (1979), "On three-dimensional nonlinear analysis of concrete structures", Nucl. Eng. Des., 52, 385-409. https://doi.org/10.1016/0029-5493(79)90029-3
  4. Beshara, F.B.A. (1993), "Smeared crack analysis for reinforced concrete structures under blast-type loading", Eng. Fract. Mech., 45(1), 119-140. https://doi.org/10.1016/0013-7944(93)90013-I
  5. CEB model code: Design code (1988), London, Thomas Telford.
  6. Chen, W.F. (1994), Constitutive equations for engineering materials, Amsterdam, Elsevier.
  7. Eibl, J. and Schmidt-Hurtienne, B. (1999), "Strain-rate-sensitive constitutive law for concrete", J. Eng. Mech., 125(12), 1411-1420. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:12(1411)
  8. Fujikake, K., Mori, K., Uebayashi, T., Ohno, T. and Mizuno, J. (2000), "Dynamic properties of concrete materials with high rates of tri-axial compressive loads", Structures Under Shock and Impact VI,(Eds. Jones, N. and Brebbra, C.A.), WIT press, 511-522.
  9. Kishi, N., Mikami, H., Matsuoka, K.G. and Ando, T. (2002), "Impact behavior of shear-failure-type RC beams without shear rebar", Int. J. Impact Eng., 27(9), 955-968. https://doi.org/10.1016/S0734-743X(01)00149-X
  10. Krauthammer, T., Shahriar, S. and Shanaa, H.M. (1990), "Response of reinforced concrete elements to severe impulsive loads", J. Struct. Eng., 116(4), 1061-1079. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:4(1061)
  11. Magnusson, J. and Hallgren, M. (2004), "Reinforced high strength concrete beams subjected to air blast loading", WIT Press, Southampton, SO40 7AA, United Kingdom, 53-62.
  12. Malvar, L.J. (1998), "Review of static and dynamic properties of steel reinforcing bars", ACI Mater. J., 95(5), 609-616.
  13. Malvar, L.J. and Ross, C.A. (1999), "Review of strain rate effects for concrete in tension", ACI Mater. J., 96(5), 614-616.
  14. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  15. Marini, A. and Spacone, E. (2006), "Analysis of reinforced concrete elements including shear effects", ACI Struct. J., 103(5), 645-655.
  16. May, I.M., Chen, Y., Roger, D., Owen, J., Feng, Y.T. and Thiele, P.J. (2006), "Reinforced concrete beams under drop-weight impact loads", Comput. Concrete, 3(2-3), 79-90. https://doi.org/10.12989/cac.2006.3.2_3.079
  17. Miyamoto, A., King, M.W. and Fujii, M. (1994), "Integrated analytical procedure for concreteslabs under impact loads", J. Struct. Eng-ASCE, 120(6), 1695-1702.
  18. Monti, G. and Spacone, E. (2000), "Reinforced concrete fibre beam element with bond-slip", J. Struct. Eng., 126(6), 654-661. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(654)
  19. Neuenhofer, A. and Filippou, F.C. (1997), "Evaluation of nonlinear frame finite-element models", J. Struct. Eng., 123(7), 958-966. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(958)
  20. Petrangeli, M., Pinto, P.E. and Ciampi, V. (1999), "Fibre element for cyclic bending and shear of RC structures. I: theory", J. Eng. Mech., 125(9), 994-1001. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:9(994)
  21. Ross, C.A., Thompson, P.Y. and Tedesco, J.W. (1989), "Split-hopkinson pressure-bar tests on concrete and mortar in tension and compression", ACI Mater., J. 86(5), 475-481.
  22. Saatci, S. (2007), Behaviour and modelling of reinforced concrete structures subjected to impact loads, PhD Dissertation, University of Toronto, Toronto.
  23. Saatci, S. and Vecchio, F.J. (2005), "Finite element analysis of shear-critical reinforced concrete beams under impact loading", Proceedings of the 6th ASIA-PACIFIC Conference on Shock and Impact Loads on Structures, Perth, December.
  24. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain rates", J. Proceed., 79(1), 13-27.
  25. Seabold, R.H. (1967), "Dynamic shear strength of reinforced concrete beams, Part 2", AD0644823, Technical rept., Jan 65-Jun 66.
  26. Shirai, K., Ito, C. and Onuma, H. (1994), "Numerical studies of impact on reinforced concrete beam of hard missile", Nucl. Eng. Des., 150(2-3), 483-489. https://doi.org/10.1016/0029-5493(94)90169-4
  27. Spacone, E. and Coleman, J. (1999), "Localization issues in nonlinear frame analysis", Structures Congress - Proceedings, 418-421.
  28. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996), "Fibre beam-column model for non-linear analysis of R/C frames: Part I. Formulation", Earthq. Eng. Struct. D., 25(7), 711-725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9
  29. Valipour, H.R. and Foster, S.J. (2007), "A Novel flexibility based beam-column element for nonlinear analysis of reinforced concrete frames", Report No. Uniciv R-447, University of New South Wales, Sydney.
  30. Valipour, H.R. and Foster, S.J. (2009), "Non-local damage formulation for a flexibility-based frame element", J. Struct. Eng-ASCE, (posted online 1 April 2009 doi:10.1061/(ASCE)ST.1943-541X.0000054).

Cited by

  1. An effective model for analysis of reinforced concrete members and structures under blast loading vol.19, pp.12, 2016, https://doi.org/10.1177/1369433216649393
  2. Hysteretic deteriorating model for quasi-brittle materials based on micromechanical damage approach vol.46, pp.1, 2011, https://doi.org/10.1016/j.ijnonlinmec.2010.09.015
  3. Low velocity impact behavior of shear deficient RC beam strengthened with CFRP strips vol.19, pp.2, 2015, https://doi.org/10.12989/scs.2015.19.2.417
  4. Nonlinear analysis of 3D reinforced concrete frames: effect of section torsion on the global response vol.36, pp.4, 2010, https://doi.org/10.12989/sem.2010.36.4.421
  5. High strength and reactive powder concrete columns subjected to impact: Experimental investigation vol.78, 2015, https://doi.org/10.1016/j.conbuildmat.2015.01.026
  6. Numerical study of dynamic behaviour of RC beams under cyclic loading with different loading rates vol.67, pp.7, 2015, https://doi.org/10.1680/macr.14.00239
  7. Experimental Study of Progressive Collapse Resistance of RC Framed Structures vol.114, pp.6, 2017, https://doi.org/10.14359/51689496
  8. Effect of loading rate on cyclic behavior of reinforced concrete beams 2017, https://doi.org/10.1177/1369433217737114
  9. Blast and Impact Analyses of RC Beams Considering Bond-Slip Effect and Loading History of Constituent Materials vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0244-9
  10. Dynamic Modified Model for RC Columns Based on Experimental Observations and Bayesian Updating Method vol.145, pp.3, 2019, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001570
  11. Impact resistance of deflection-hardening fiber reinforced concretes with different mixture parameters pp.14644177, 2019, https://doi.org/10.1002/suco.201800233
  12. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2009, https://doi.org/10.12989/sem.2011.38.4.479
  13. Dynamic bending behaviours of RC beams under monotonic loading with variable rates vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.339
  14. Dynamic behaviours of reinforced concrete columns under cyclic loading with variable rates vol.23, pp.4, 2009, https://doi.org/10.1177/1369433219881753