• 대한산업공학회지
• /
• 제20권1호
• /
• pp.3-13
• /
• 1994

The problem of selecting the optimal target values in a canning process is considered for situations where there is a linear shift in the mean of the content of a can which is assumed to be normally distributed with known variance. The target values are initial process mean, length of resetting cycle and controllable upper limit. Profit models are constructed which involve give-away, rework, and resetting costs. Methods of finding the optimal target values are presented and a nemerical example is given.

• 품질경영학회지
• /
• 제22권2호
• /
• pp.41-50
• /
• 1994

Consider a canning process where cans are filled with an expensive ingredient. Cans weighting above the specified limit are sold in a regular market for a fixed price, and underfilled cans are emptied and refilled at the expense of a reprocessing cost. In this paper, the effect of measurement error on the determination of the optimal process mean for a canning process is examined. It is assumed that the quantity X of ingredient in a can is normally distributed with unknown mean and known variance, and the observed value Y of X is also normally distributed with known mean and variance. A profit model is constructed which involves selling price. cost of ingredients, reprocessing cost. and cost from an accepted nonconforming can, and methods of finding the optimal process mean and the cutoff value on Y are presented. It is shown that the optimal process mean increases. and the expected profit decreases when the measurement error is relatively large in comparison to the process variance.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.245-253
• /
• 2008

The porous metal material is used for injection metal mold with a great deal of gas production because it makes plenty of gas exhausted through pores formed in the metal mold. A canning HIP method was conventionally used for manufacturing of porous metals, but because of difficulty of process control and high cost of production its application was limited. In this experiment, porous metal mold material was produced by an enhanced vacuum sintering method with simply controlled and economical process and porosities/mechanical properties with variation of sintering temperature and duration time during vacuum sintering were studied. As a result, quality goods were obtained at optimized conditions as follows: sintering temperature of $1230^{\circ}C$, duration time of 2 hr and showed superior properties in wear loss and thermal conductivity and the same properties in hardness, TRS (Transverse Rupture Strength), and thermal expansion coefficient in comparison with those under canning HIP.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.165-172
• /
• 2017

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as 'Tool wear limit', 'Canning Process' and 'Quality Loss Function' separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.16-23
• /
• 2008

This paper describes $R_p,\;R_d,\;R_c,\;R_{cp},\;R_{cd}$ for design and manufacture of die by comparing the results. Results of this study could be reduced from three processes to two processes and drawing can be conducted using one die set by modifying structure of the punch head and die plate. Oil canning phenomenon can be prevented when circle blanking or ellipse blanking in blanking drawing. $R_c$, the important factor of drawing process was able to evaluate properly in designing of product.

• Fisheries and Aquatic Sciences
• /
• 제2권2호
• /
• pp.155-160
• /
• 1999

Studies on detoxification of Paralytic Shellfish Poison (PSP)-infested oyster, Crassostrea gigas were carried out using available processing resources. Changes of paralytic shellfish toxin components and specific toxicity during canning process were also investigated with high performance liquid chromatography (HPLC). Toxic oysters collected at Hachong in Koje Bay were used for experimental samples. The toxicity of oysters with range of 185-778 ug/100g was reduced below the quarantine limit of 80 ug/100g or not detected level by the mouse bioassay after canning process. The mole $\%$ of toxin components in the shucked oyster was in the order of 25.1 mole $\%$ of gonyautoxin 1, 19.2 mole $\%$ of gonyautoxin 3, 17.2 mole $\%$ of gonyautoxin 4 and 14.6 mole $\%$ of gonyautoxin 2. This sample had tracing amounts of Cl, C2, saxitoxin and neosaxitoxin. In the case of specific toxicity, the major toxins were consisted of gonyautoxin 1-4. The sum of gonyautoxin 1, 2, 3 and 4 was 80% of total toxicity of oyster. Saxitoxin and decarbamoylsaxitoxin were the more thermostable than any other toxin components.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1471-1476
• /
• 2011

자동차 배기계의 앞쪽에 배치된 촉매변환기는 배기가스 중 유해한 성분을 무해한 것으로 변환하는 제품이다. 이것의 중심부인 담체는 단면의 윤곽이 원형이나 타원형이고 내부는 미세한 격자형 벽으로 채워진다. 담체를 매트로 두르고 캔에 넣는 캐닝공정 중 과대한 압력을 받아서 담체가 취성파괴될 것이 염려된다. 담체의 파괴를 방지하고자 매트의 압력의 분포를 예측하는 유한요소 프로그램을 개발하였다. 이것은 Microsoft EXCEL로 작성되어 입출력이 모두 간편하다. 담체는 강체, 캔은 선형탄성체로 단순하게 취급하고 매트의 재료비선형성을 고려하였다. 캔은 굽힘과 균일인장이나 압축에 저항하는 것으로 모델링하였다. 편의상 요소의 갯수는 35개, 반복 횟수는 20회로 제한하였다. ABAQUS의 해석결과와 잘 일치하여 본 프로그램의 타당성을 입증하였다.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.303-306
• /
• 2002

P/M high speed steels with various Co contents were fabricated by gas atomization and Canning/HIP process. As Co content in P/M high speed steel increased, hardness, transverse rupture strength and yield strength in compressive testing increased due to solid solution hardening of Co in matrix. Especially, PM high speed steels with Co have high deformation resistance to repeated compressive loading.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2309-2312
• /
• 2003

This paper presents the minimization of the energy costs based on energy saving for industrial retort process of canned food. The approved proposed method is related the optimal steam or hot water flow control to achieve desired temperature of retort process. The smooth response and zero steady state error can be also achieved. The performances of the proposed control technique were observed using a small tuna canned food plant in Thailand as an illustrative example. The experimental results are given to support the saving in energy costs and some benefits of the proposed technique.

• 한국식품과학회지
• /
• 제3권1호
• /
• pp.25-28
• /
• 1971

Aspergillus saitoi가 생산(生産)하는 섬유소분해효소(纖維素分解酵素)의 생산조건(生産條件)과 밀감내과피(內果皮)의 탈피효과(脫皮效果)를 검토한 결과(結果)는 다음과 같다. 1. Asp. saitoi의 배양최적(培養最適) 온도(溫度)는 $30^{\circ}C$, 시간(時間)은 72시간(時間)에서 섬유소(纖維素) 생성능(生成能)이 가장 좋았다. 2. 본효소(本酵素)를 10배(倍) 농도로 희석하여 (희석효소액 : 밀감 2 : 1) $40^{\circ}C$의 항온조(恒溫槽)에서 $3.5{\sim}4$시간(時間) 작용(作用)시킨 것이 탈피정도(脫皮程度), 풍미(風味), 광택(光澤)이 우수하여 밀감 syrup 통조림 제조조건으로 최적(最適)이었다.