• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.101-105
• /
• 2002

In this paper we describe techniques for the automated creation of geometric correct 3-D models of the building using two 2-D laser scanners. One of the laser scanners is used for position estimation using a scan matching algorithm, while the other is used to build 3-D models of the facade of the buildings. Those models can be used for virtual reality, tele-presence, digital cinematography and urban planning applications. Results are shown for building models in our campus using real data acquired from two sensors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.743-748
• /
• 2002

The eventual Purpose of this research is to make optimum standards for acoustic-environment by using not only physical characteristics but also subjective appraisals. Basic physical data were measured which were necessary to establish standards for acoustic environment in campus buildings, TSP has used to measure sound levels, reverberation times, clearness indexes, and speech-transmission-index. In addition to physical characteristics, questionnaires were given to university students to given subjective appraisals. For instance, questions about volume or clearness of lectures. The relevancy between physical characteristics and subjective appraisals was studied.

• Steel and Composite Structures
• /
• 제9권1호
• /
• pp.39-58
• /
• 2009

Composite joints, considering the composite action of steel and concrete, exhibit, in general, high strength and high ductility. As a consequence, the use of this type of joint has been increasing in many countries, especially in those that are located in earthquake-prone regions. In this paper, a hysteretic model with pinching is presented that is able to reproduce the cyclic response of steel and composite joints. Secondly, the computer implementation and adaptation of the model in a spring element within the computer code Seismosoft is described. The model is subsequently calibrated using a series of experimental test results for composite joints subjected to cyclic loading. Finally, typical parameters for the various joint configurations are proposed.

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.1-8
• /
• 2014

When seismic isolation system is applied to high aspect-ratio (height/wide-ratio) steel structures, there are several problems to be taken into consideration. One is lifting up tensile force on the isolation bearing by overturning moment caused by earthquake. Another is securing building stiffness to produce seismic isolation effects. Under these conditions, this paper reports the structural design of high-rise research building in the campus of Tokyo Institute of Technology. With the stepping-up system for the corner bearings, the narrow sides of single span framework are designed to concentrate the dead load as counter-weight for the tensile reaction under earthquake. Also we adopted concrete in-filled steel column and Mega-Bracing system covering four layers on north & south framework to secure the horizontal stiffness of the building.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.65-70
• /
• 2018

This paper describes a effective information compressor algorithm for the fourth industrial technology. One of the difficult problems for outdoor is to obtain effective updating process of background images. Because input images generally contain the shadows of buildings, trees, moving clouds and other objects, they are changed by lapse of time and variation of illumination. They provide the lowering of performance for surveillance system under outdoor. In this paper, a effective information algorithm for variable environment variable under outdoor is proposed, which apply the Kalman Estimation Modeling and adaptive threshold on pixel level to separate foreground and background images from current input image. In results, the better SNR of about 3dB~5dB and about 10%~25% noise distribution rate in the proposed method. Furthermore, it was showed that the moving objects can be detected on various shadows under outdoor and better result Information.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.121-123
• /
• 2011

GPS 위치정보는 위성의 개수에 따라 정확도가 달라지며 주위에 고층빌딩이 있거나 숲이 우거져 있는 경우 정확도가 떨어지거나 수신율이 저하되는 단점이 있다. 본 논문은 스마트폰에서 GPS위치 정보와 스마트폰의 센서 정보를 통합하여 GPS 음영지역에서 위치정보를 개선시킬 수 있는 알고리즘을 제안한다. 제안한 알고리즘은 스마트폰에서 구현하여 성능 평가하였다.

• 한국조경학회지
• /
• 제38권5호
• /
• pp.12-20
• /
• 2010

본 연구는 도시 소공간의 열환경을 개선하기 위한 방안을 모색하고자 공간 구조별 열특성을 평가하여 분석하였다. 도심 내 위치한 고려대학교 캠퍼스를 연구 대상지로 선정하였으며, 대상지 내에 공간 유형을 대표하는 각각의 장소에서 열환경을 조사하였다. 기상장비를 활용한 미기상 및 바이오 기상 측정, 어안렌즈 촬영사진(Fish-eye lens photography)를 활용한 공간구조 및 특성 분석, 그리고 온도나 습도와 같은 기상정보 및 이미지 정보를 활용한 열쾌적성 모델링의 순서로 공간의 열환경 및 인체 열쾌적성을 분석하였다. 열환경 평가 결과, 인체 열쾌적성의 정도는 캠퍼스 공간의 유형에 따라 차이가 나타났다. 건물이나 수목 등에 의해 위요된 폐쇄형 공간 유형에서 개방형 공간 유형에서 분석된 평균 복사온도, PMV, PET 지수보다 더 양호한 것을 알 수 있었다. 이러한 결과는 수목과 건물에 의한 태양복사열의 차단 및 그림자의 영향을 받기 때문이라고 할 수 있다. 그러므로 공간을 계획할 때 개방성이나 통풍성을 높이기 위한 수목의 배치를 고려하고 복사열을 차단할 수 있는 바닥포장이나 건물 외장재 종류를 선택할 필요가 있다. 본 연구는 도시 공간의 이용자가 실제적으로 느끼는 열쾌적성의 정도를 정량화하고 이를 평가함으로써 이용자를 고려한 공간계획 방안을 제안하였다.인체 열쾌적성을 평가하는 정량적 평가 방법 및 그에 따른 연구결과는 향후 도시 공간의 쾌적한 환경을 조성하는데 기여할 수 있을 것으로 판단된다.

• 대한공간정보학회지
• /
• 제10권4호
• /
• pp.69-76
• /
• 2002

오늘날에 정보는 토목공학에서 매우 중요하다. 대개 이 정보는 측량 및 지형공간정보체계로부터 획득된다. 또한 이 정보는 지능형교통체계(ITS), 항법, 시설물 관리, 그리고 수치지도제작, 기타 등의 분야에서 매우 중시되고 또한 앞으로 다양한 분야에서 응용될 것이다. 그리고 측량분야에서, GPS 위성이 새로이 도입되어 중요한 역할을 하고 있다. 본 연구에서는 GPS 위성을 이용한 측위기술 중 하나인 실시간 동적측량(RTK)을 대학의 평면도 제작에사용하였다. 이를 통해 화단 일부분과 도로에 대한 정보를 회득할 수 있었지만 주위 건물에 대해서는 회득이 불가능 하였다. 그러므로 이것은 전채 작업에서 작업의 효율성을 저하시키게 된다. 그래서 이런 경우 토탈스테이션, 평판, 그리고 데오도라이트 등이 기타 보조장비가 사용되어야 할 것으로 기대된다.

• 한국태양에너지학회 논문집
• /
• 제30권1호
• /
• pp.50-60
• /
• 2010

Today, the amount of energy consumption in the university campuses is huge. The effort for the energy consumption reduction in university campuses is certainly needed by the following reason; first, contribution to the greenhouse gas discharge reduction demand. Second, energy cost reduction in university campus. Third, contribution to the improvement of the social awareness as the maximum higher educational institutions. The energy consumption analysis of current situation has to be executed for the energy consumption reduction in university campus. The energy reduction possibility in which it exists in university campuses can be understood through the energy consumption analysis. And the application is possible as fundamental data of the policy establishment for the effective energy reduction in university campuses. Especially, the best way to reduce the energy consumption in university campuses that is the energy consumption reduction of buildings. Accordingly, this study derived the plans for improving the performance of energy in the university building by analyzing case study, so this study analyzed the performance of energy for the university building through VE, a program for the analysis of building energy. Based on this result, this study classified the plans improving the efficiency of energy in university building into the plan for passive control and active control respectively, and suggested some concrete plans, and finally evaluated the performance of decreasing energy consumption for each plan.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.33-47
• /
• 2020

In this paper the dynamic behavior of an isolated building subjected to idealized near-fault pulses is investigated. The building is represented with a simple 2-DOF model. Both linear and non-linear behavior of the isolation system is considered. Using dimensional analysis, in conjunction with closed form mathematical idealized pulses, appropriate dimensionless parameters are defined and self-similar curves are plotted on dimensionless graphs, based on which various conclusions are reached. In the linear case, the role of viscous damping is examined in detail and the existence of an optimum value of damping along with its significant variation with the number of half-cycles is shown. In the nonlinear case, where the behavior of the building depends on the amplitude of the excitation, the benefits of dimensional analysis are evident since the influence of the dimensionless 𝚷-terms is easily examined. Special consideration is given to the normalized strength of the non-linear isolation system that appears to play a complex role which greatly affects the response of the 2-DOF. In the last part of the paper, a comparison of the responses to idealized pulses between a linear fixed-base SDOF and the respective isolated 2-DOF with both linear and non-linear damping is conducted and it is shown that, under certain values of the superstructure and isolation system characteristics, the use of an isolation system can amplify both the normalized acceleration and displacement of the superstructure.