• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.39-46
• /
• 2016

In this paper, we proposed an application which can conduct to take repetition images for special effect shooting at movies or drama using Bluetooth of smart device. The proposed application can move a camera with motors several times as the same moving after saving of the control data based on the application during specific time using Bluetooth. At the repetition moving, we do not permit to control motors of the camera by person for keeping the same start position and end position after saving the moving data. The camera motors are only moved remotely by saving data of the proposed application. We developed the proposed application and a hardware which works motors with camera to check performance evaluation. Then, we confirmed that the proposed application exactly did the same moving to the motors with camera several times according to saved data. Therefore, because the proposed application can take a same images as control remotely the motors of camera, it will be a useful technology for special effect shooting of movies or dramas.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.183-195
• /
• 2004

Photogrammetry is one of the most important sources of GIS application. Nowadays, color photos are used and camera is integrated with GPS/INS sensors. However the photos are still taken from analogue camera and scanned for digital image. For the convenient and accurate image application especially for 3D, airborne digital camera images is essential. In this paper, digital image calibration process with GPS/INS and its accuracy evaluation was presented.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.90-95
• /
• 2000

This paper presents the vergence control of a parallel stereo camera and its application to underwater stereo camera to enhance the working efficiency of underwater vehicles that equips with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get a clear stereo vision with the camera for all the range of objects in air and in water, especially in short range objects. The control system of the camera is so simple that we are able to realize a small stereo camera system and to apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain the three-dimensional images and the distance information in real-time.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.79-84
• /
• 2001

This paper present the control of the image disparity of a parallel stereo camera and its application to an underwater stereo camera to enhance the working efficiency of underwater vehicles that are equiped with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get clear stereo vision with the camera for all the range of objects in air and in water, especially in short range object. The control system of the camera is so simple that we are able to realize a small stereo camera system and apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain three-dimensional images and distance information in real-time.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.417-428
• /
• 2020

Augmented reality(AR) service as one of the representative technologies in the era of the 4th industrial revolution has gotten people's increasing attention. At this time, this study aimed to examine the determinants affecting service satisfaction of the AR-based camera application service by focusing on Naver's service. Several factors that might have influences on satisfaction of the AR-based camera application service were conceived based on the previous literature. And it was tested whether they had influences on satisfaction of the AR-based camera application service or not empirically. The responses of a sample of 312 people who had experienced using Naver's service were collected by means of an online survey and they were analyzed employing a hierarchical regression analysis. The results of this research indicated that gender as one of demographic variable, perceived interactivity, aesthetic value, trend following motivation as an extrinsic motivation and playfulness as an intrinsic motivation have significant influences on the service satisfaction of the AR-based camera application service. The results in this study have meanings since they can be used as references for AR service providers to develop more satisfactory AR services.

• Korean Journal of Remote Sensing
• /
• v.30 no.3
• /
• pp.383-397
• /
• 2014

Information technology advances are allowing conventional surveillance systems to be combined with mobile communication technologies, creating ubiquitous monitoring systems. This paper proposes monitoring system that uses smart camera technology. We discuss the dependence of interior orientation parameters on calibration target sheets and compare the accuracy of a three-dimensional monitoring system with camera location calculated by space resectioning using a Digital Surface Model (DSM) generated from stereo images. A monitoring housing is designed to protect a camera from various weather conditions and to provide the camera for power generated from solar panel. A smart camera is installed in the monitoring housing. The smart camera is operated and controlled through an Android application. At last the accuracy of a three-dimensional monitoring system is evaluated using a DSM. The proposed system was then tested against a DSM created from ground control points determined by Global Positioning Systems (GPSs) and light detection and ranging data. The standard deviation of the differences between DSMs are less than 0.12 m. Therefore the monitoring system is appropriate for extracting the information of objects' position and deformation as well as monitoring them. Through incorporation of components, such as camera housing, a solar power supply, the smart camera the system can be used as a ubiquitous monitoring system.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.64-65
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.504-506
• /
• 1997

CCD camera is usually used for monitoring device. In most cases, he monitoring is performed from long distance. In this study, a camera system controlled through internet is developed. Using the system, not only we can get image information in real time but also we can control the orientation of the camera from long distance. Furthermore wireless communication is carried out between the camera and the server computer for verity of the application.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.553-558
• /
• 2007

The equation based on vector inner product by the angles between pairs of two image rays can independently separate the position and pose of a camera. As our second application, the exterior calibration between a camera and a laser range finder is proposed here through analysis of surfaces created by the equation.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.