• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.281-288
• /
• 2006

Fitness center which was first introduced through hotel fitness has been disseminated into country over the years and these days it becomes a public sports facility that is available even in a small city. Fitness center usually requires a space more than 500 pyeong and even in a small fitness facility at least 200-300 pyung is in need. Also, complex structure including a space for preparing exercise and other subsidiary facility is necessary as well as various service areas to perform various exercise programs. In case of domestic fitness centers, however, proper standard and data required to compute the scale of each service area is not available due to the short of piling data. Therefore computing each space totally depends on an instinct decision of a designer or client, which may cause the fail of effective use of space. This paper aims to calculate appropriate use of space, that is, the over all space, equipment size, and movement line of each area as well as preference and frequence of use among areas is estimated in order to apply those data when computing appropriate estimation of scale.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.347-348
• /
• 2023

In construction sites, small-scale construction quantities or limited work hours below the daily work volume may occur due to on-site conditions. For small-scale quantities, the input of equipment and labor is designed based on an hourly basis in the invoice, resulting in a difference from the actual cost. In this study, we aim to explore solutions from the perspective of construction cost standards to secure appropriate construction costs for small-scale and time-limited construction sites. Firstly, to preserve the basic construction costs on-site, we established standards where half the cost would be charged for construction quantities below four hours and a full day's cost would be designed for construction quantities between four to eight hours. Additionally, realistic construction cost calculation standards are expected to be provided by realizing a surcharge rate for work hour limitations to secure appropriate construction costs.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.967-987
• /
• 2020

A numerical analysis is carried out for the marine propellers in open water conditions to investigate the effect of the wall treatments in model and full scale. The standard wall function to apply the low of the wall and the two layer zonal model to calculate the whole boundary layer for a transition phenomenon are used with one turbulence model. To determine an appropriate distance of the first grid point from the wall when using the wall function, a formula based on Reynolds number is suggested, which can estimate the maximum y+ satisfying the logarithmic law. In the model scale, it is confirmed that a transition calculation is required for a model scale propeller with low Reynolds number that the transient region appears widely. While in the full scale, the wall function calculation is recommended for efficient calculations due to the turbulence dominant flow for large Reynolds number.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.146-153
• /
• 2011

Some methods of calculation of test load value from design load data were investigated which will be applied at strap installed full-scale airframe of composite aircraft. These methods were applied to left wing of KC-100 composite aircraft and the calculated test load values were compared with each others. Generally since test load values are differently calculated according to each aircraft type and position of straps, all calculation methods mentioned at this study need to be applied and compared to each aircraft. Finally the most appropriate method needs to be selected.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.47-57
• /
• 2009

Computing environments are being more and more various due to the development of technologies. While existing computing environments used for fixed locations or particular purposes by requesting big scale monitors or complicate calculation performance, recent computing environments are used for a variety of locations and for a diversity of purposes by using various devices. Because of the needs, digital device convergence, which emphases portability and mobility, came out. However, almost researches for user interface are performed for big scale monitors or complicate calculation performance until now. By the reason, user interface on each small device is different from others, or is not appropriate for the purpose of small device. Therefore, this research is to design Zoomable User Interface (ZUI) that adapts for small devices by adding the existing user interface on small devices and haptic technologies, and to implement a user interface for PDA devices.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1094-1103
• /
• 2010

The safety of pile foundation is getting declined when the pile foundation acting on lateral load is exposed by dredging. So appropriate reinforcement is needed for stability secure. Thus, in this study, the stability variation and reinforcement range caused by dredging is estimated on the basis of down scale test. The scale effect is determined by real scale numerical analysis. the behavior of pile by dredging stages is estimated by load control type. The credibility is verified through the comparison between down scale model test and numerical analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.42-46
• /
• 2005

In spite of fast growing of prediction codes, there is still not negligible uncertainty in their results. This uncertainty affects on the turbine structural design and power production prediction. With the growing size of wind turbine, reducing this uncertainty is becoming one of critical issues for high performance and efficient wind turbine design. In this respect, there are international efforts to evaluate and tune prediction codes of wind turbine. As the reference data for this purpose, field test data is not appropriate because of its uncontrollable wind characteristics and its inherent uncertainty. Wind tunnel can provide controllable wind. For this reason, NREL has done the full scale test of the 10m turbine at NASA-Ames. With this reference data, a blind comparison has been done with participation of 18 organizations with 19 modeling tools. The results were not favorable. In Europe, a similar project is going on. Nine organizations from five countries are participating in the MEXICO project to do full scale wind tunnel tests and calculation with prediction codes. In this study. these two projects were reviewed in respect of wind tunnel test and its contribution. As a conclusion, it is suggested that scale model wind tunnel tests can be a complementary tool to calculation codes which were evaluated worse than expected.

• Journal of Korean Academy of Nursing
• /
• v.40 no.6
• /
• pp.820-830
• /
• 2010

Purpose: The purpose was to develop a preliminary scale to measure Korean adolescents' health behaviors through a qualitative approach, to evaluate the scale psychometrically, and to develop a final scale. Methods: Participants were 61 adolescents for qualitative interviews and 1,687 adolescents for the psychometric evaluation. Procedure included content analysis of interviews to identify health behavior categories for Korean adolescents, pre-test to confirm that preliminary scale items were understandable, content validity by an expert panel, development of the web-based computer-assisted survey (CAS), and psychometric analysis to determine reliability and validity of the final scale. Results: A final scale was developed for both paper-and-pencil and CAS. It consisted of 14 health behaviors (72 items), including stress and mental health (10), sleep habits (5), dietary habits (12), weight control (4), physical activity (4), hygiene habits (5), tobacco use (5), substance use (2), alcohol consumption (4), safety (4), sexual behavior (9), computer use (3), health screening (4), and posture (1). Conclusion: The scale's strong points are: 1) Two thirds of the final scale items are Likert scale items, enabling calculation of a health behavior score. 2) The scale is appropriate to Korean culture. 3) The scale focuses on concrete health behaviors, not abstract concepts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.155-156
• /
• 2020

Unlike new construction projects, road paving maintenance work shows large productivity discrepancies depending on the conditions of the worksite. The current construction cost calculation scheme, however, only provides daily construction volume categorized by work scope and scale: There are no detailed standards that can be implemented on various types of worksites. To develop standards that enable the calculation of appropriate construction costs by taking into account worksite conditions, the current study conducted on-site surveys and interviews. The on-site research and analysis revealed that location, construction width, the day's worksite lot, work scope, and construction objectives were found to cause differences in construction volume. In addition to the existing work scope and work scape variables, the current study added weight constants reflecting the daily work volume based on movement conditions at site and the size of the worksite lot. In this process, the current study found that even one type of construction project can have fifteen different levels of daily construction volume. Such detailed classification was deemed to enable the proper calculation of construction costs based on worksite conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.77-83
• /
• 2008

In the process of the sonar image textures produced, the orientation and scale factors are very significant. However, most of the related methods ignore the directional information and scale invariance or just pay attention to one of them. To overcome this problem, we apply Gabor wavelet to extract the features of sonar images, which combine the advantages of both the Gabor filter and traditional wavelet function. The mother wavelet is designed with constrained parameters and the optimal parameters will be selected at each orientation, with the help of bandwidth parameters based on the Fisher criterion. The Gabor wavelet can have the properties of both multi-scale and multi-orientation. Based on our experiment, this method is more appropriate than traditional wavelet or single Gabor filter as it provides the better discrimination of the textures and improves the recognition rate effectively. Meanwhile, comparing with other fusion methods, it can reduce the complexity and improve the calculation efficiency.