• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.933-935
• /
• 2001

This paper presents a calculating method for inductance of the Switched Reluctance Motor(SRM) for torque characteristics and driving by analytical model. The approaches for calculating inductance have taken vary from detailed finite element analysis(FEA) and Fitting method in magnetization curves using complex nonlinear magnetic circuit models. But those methods have not satisfactory approach for machine performance calculations, because of having a long time and remodeling for analyses, therefore thus an alternative approach is required. So it is suggested simply calculating method of the inductance based on designed data of machinery by analytical model in unaligned and aligned rotor. In order to prove the calculating, there are compare with analytical FEM, direct measurement, this method, and simulation. The compared result is shown to obtain good accuracy.

• 환경영향평가
• /
• 제10권1호
• /
• pp.59-71
• /
• 2001

This study aims to propose a determinant model to select a method on calculating weight of each indicator for environmental evaluation. According to analyzing and comparing with three types of methods for calculating weights which are usually used to evaluate environment with indicators, the weights which were obtained by each type were all different from each other. This means that a differential weighting method must be applied to each of environmental evaluation studies. Therefore, a determinant model is required to determine weight-calculating methods. Three types of weighting methods, such as weighting by importance degree, weighting by eigen-value and weighting by analytic hierarchy process, were compared. Under the necessity, a determinant model was drawn for selecting a compatible method to calculate weights of indicators in environmental evaluation.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.578-583
• /
• 2000

In order to operate water quality model for a lake or a channel, user should examine the all kinds of parameters and should know how them react to the model for calculating the pollution which are happened from the watershed or are reacted in the water. The aim of this study is analyzing the characteristics of parameters which are used by a water quality model (CE-QUAL-W2), so that we are trying to find out how them to react to the model for calculating the many kinds of pollution.

• 천문학회지
• /
• 제42권3호
• /
• pp.47-54
• /
• 2009

In this paper we present an independent FORTRAN code for calculating LTE-plane-parallel model atmospheres. The transfer equation has been solved using Avrett and Loeser method. It is shown that, using an approximate non-gray temperature distribution together with the iteration factors method (Simonneau and Crivellari) for correcting the temperature distribution reduce the number of iteration required to achieve the condition of radiative equilibrium. Preliminary results for pure helium model atmospheres are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.372-376
• /
• 1989

One of the major difficulties with modular approach model of separation process simulation is initial guess problem. Only accurate initial guess make the problem converge and large computer memory and calculating time are required. In this study, we use the initial bottom guess value same as given feed condition and update the value the .theta.method. So we examine;(1)the problem converges using initial guess with large range, (2)computer memory and calculating time are reduced considerably.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.536-541
• /
• 2002

This paper proposes an approach of automatically calculating the center location of fiducial marks up to sub-pixel accuracy with model-free condition. The conceptual model, composed of two assumptions, about general geometric property of fiducial area and fiducial mark is established. The proposed approach is primarily based on the strategy of calculating the center of symmetry and is composed of three steps of processing: (a) determining horizontal center of fiducial area, (b) locating center of a fiducial mark, and, (c) finally calculating the exact center up to sub-pixel accuracy. Evaluation with respect to RMK style marks and RC style ones shows that the proposed approach can be evaluated as robust one. However there are several images which can't be analyzed by the proposed approach.

• Journal of Advanced Marine Engineering and Technology
• /
• 제5권1호
• /
• pp.34-51
• /
• 1981

Lately, due to increasing engine output by high supercharging, heavy crankshaft and propeller mass, as well as long strokes attended with the reduced crankshaft axial stiffness, the critical crankshaft axial vibration has frequently appeared in maneuvering range of the engine. Some investigators have developed calculating methods of natural frequencies and resonant amplitudes for crankshaft axial vibrations. But their reliabilities are uncertain as the estimated crankshaft axial stiffness are incorrect. The calculating procedure of these natural frequencies is practically analogous to the classical calculation of torsional vibration frequencies, except for an important difference due to the relationship of the axial stiffness of a crank and the angle between the crank and other, especially the adjacent, cranks. In this paper, 6 calculation formulae of crankshaft axial stiffness already published and a theoretically- developed one by authors are checked by comparing their calculating results with those measured values of one model crankshafat and three full-scale actual crankshafts. Also, the calculating methods of the crankshaft axial free vibration are investigated and their computer programs are developed. Finally, those developed computer programs are applied to calculating one model crankshaft and two full-scale actual crankshafts of ship's propulsion engines and their calculated results are compared with those measured values.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.552-557
• /
• 2024

The actual swelling of AgInCd absorber might exceed the predicted swelling value after years of service in pressurized water reactors, and the chemical and microstructural changes of AgInCd absorber induced by transmutation reactions are the main reason for the swelling acceleration of AgInCd absorber. In the present study, a model for calculating the irradiation swelling of AgInCd absorber in nuclear control rods is developed according to chemical and microstructural changes of AgInCd absorber. In this model, the chemical compositions of AgInCd absorber as a function of the thermal neutron fluence are firstly calculated, and then the volume of AgInCd absorber after irradiation is obtained on the basis of the crystallographic parameters of phases in the AgInCd absorber, and the irradiation swelling of AgInCd absorber is finally calculated. The crystallographic parameters can be obtained by preparing the simulated AgInCd alloys and fitting the experimental data. The model calculating results of irradiation swelling are in good agreement with the actual swelling data in literature. More importantly, the present model can well explain the EPRI results of the acceleration in the diametral swelling rate above 6-8 × 10²⁰ n/cm² and the decrease in the diametral swelling rate above about 2 × 10²¹ n/cm².

• Steel and Composite Structures
• /
• 제15권3호
• /
• pp.247-266
• /
• 2013

This paper presents a comparison of results obtained by a newly developed numerical model for predicting the behaviour of structures under fire with experimental study carried out on heated and simply supported steel beam elements. A newly developed numerical model consists of three submodels: 3D beam model designed for calculating the inner forces in the structure, 2D model designed for calculation of stress and strain distribution over the cross section, including the section stiffness, and 3D transient nonlinear heat transfer model that is capable of calculating the temperature distribution along the structure, and the distribution over the cross section as well. Predictions of the calculated temperatures and vertical deflections obtained by the numerical model are compared with the results of the inhouse experiment in which steel beam element under load was heated for 90 minutes.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1065-1070
• /
• 2003

In arc spot welding process, the arc is not moving and heat input is concentrated in one spot so that the heat input efficiency of arc is higher than that of GMAW. In other words, the heat input efficiency of arc change during weld time because arc start is done in spot and weld metal is filled. Therefore, the heat input model of arc spot welding should be different from that of general GMAW. In present study, the calculating model of heat input efficiency in arc spot welding was suggested by temperature monitoring near spot in arc spot welding of copper plate. The result showed that the heat input efficiency of arc was changed three times during weld time. The accuracy of calculating method of heat input efficiency was verified by heat transfer analysis of arc spot welding process using finite element method.