• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.1-9
• /
• 2020

In Korea, hydrogen stations are being promoted and commercialized. However, the risk assessment for the hydrogen station is not clear. In particular, it is not clear how to calculate the risk and acceptable criteria for a hydrogen station. Therefore, in this study, three hydrogen stations being installed were selected and general risks were calculated and the social risk of each hydrogen station was calculated. In general, the method of risk assessment is individual/social risk. This is an individual's death rate considering the frequency of accidents, And the likelihood of death according to the number of nearby residents. These can be used to calculate the level of risk for a hydrogen station. However, this method of calculate risks is the criteria for judging whether it is acceptable are unclear. For this reason, this study investigated the allowable standards for foreign risks and considered that they were acceptable by applying the risks of selected domestic hydrogen stations.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.2
• /
• pp.49-57
• /
• 1995

Areas of Chungyang in Chungcheongnamdo, Cheju island and Georgia in U.S.A. were selected to calculate their groundwater ages and dispersion parameters using tritium. Piston flow model, Completely mixing model and Dispersion binomial model which calculate men residence times, and Dispersion normal model and Dispersion model(C$\_$FF) which calculate mean residence times and dispersion parameters simultaneously were applied. Since the input data, tritium concentrations of rainwaters, lack in part, tritium input function was prepared using the correlation of tritium concentrations of rainwaters of Pohang, Korea and Ottawa, Canada. Similar results of PFM and DBM reflect the intrinsical similarity of two models, assumption of low dispersion. The ages of sites of showing relatively higher tritium concentrations than other sites in the sam, region were not calculated by CMM. Since the calculations of DNM and DM(C$\_$FF/) provide the combination of wide ranges of parameters and groundwater ages, the ranges of dispersion parameters were narrowed down under the assumption that ages calculated by PFM and DBM are correct. Since large variation of tritium concentrations of outflows in a same region may reflect the different characteristics of each groundwater flow regime, using only one specific model on a whole region is not recommended.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.47-57
• /
• 2000

It is difficult to calculate factor of safety of a tunnel by applying any analytical method based upon limit equilibrium method since the shape of failure plane in tunnel analysis can not be easily assumed in advance. To cope with this shortcoming, a method is suggested to calculate safety factor of a tunnel by numerical analysis using strength reduction technique. A circular tunnel excavated in a homogeneous rock was selected as an example problem and factors of safety were calculated for no-supported, partly-supported, and completely-supported cases respectively. Meshes with 3 different sizes were examined for a sensitivity analysis. For the verification of the proposed method, a limit equilibrium analysis was conducted and compared with the numerical analysis. The proposed method herein can be used to calculate factor of safety of a tunnel regardless of tunnel shape or geological conditions, and thus can contribute for the improved design and stability assessment of tunnels.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.125-130
• /
• 2007

Single-phase is used widely power of field of appliance because can use commercialized power directly without power transform. Specially, because condenser nu-drive style single-phase induction motor efficiency is excellent, and most suitable in embodiment as economical. It is established true that method by crossing self-discipline and method by revolving magnetic field are interpretation of net single-phase induction motor, but method to calculate electric motor inside proper move in existent theory or method is some complex. That arbor in the law of circuit constant that combine equivalent circuit law with numerical analysis law according to development of the latest computer or microprocessor is suggested and does the calculation processing fast and correct. In this paper, measurement wishes to present method that calculate after calculate digital measurement that measures correctly and measures impossible the first and the second leakage reactance and no-load test locked-rotor test, DC test and resistance measurement of stator winding in circuit parameter calculation program that is had for MatLab program individually in single-phase power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.654-662
• /
• 2016

As the number of gates and basic events in fault trees increases, it becomes difficult to calculate the exact probability of the top event. In order to overcome this difficulty the BDD methodology can be used to calculate the exact top event probability for small and medium size fault trees in short time. Fault trees are converted to BDD by using CUDD library functions and a failure path search algorithm is proposed to calculate the exact top event probability. The backward search algorithm is more efficient than the forward one in finding failure paths and in the calculation of the top event probability. This backward search algorithm can reduce searching time in the identification of disjoint failure paths from BDD and can be considered as an effective tool to find the cut sets and the minimal cut sets for the given fault trees.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.99-104
• /
• 2013

Many activities associated with the construction and habitation of buildings are connected with issues affecting the environment such as global warming, climate change, and consumption of valuable natural resources such as fossil fuels. To minimize negative impacts on the environment, the building industry worldwide has implemented green building practices in many countries. One of the main green strategies is to reduce greenhouse gas emissions caused by residential structures because they are most substantially connected with global warming and climate change. To determine the actual quantity of green house gas emissions caused by the construction and use of a building, it is important to analyze total greenhouse gas emissions over the life cycle of buildings including construction, operation & maintenance(O&M) and demolition stages. Many studies suggest methods to calculate greenhouse gas emissions at the construction stage, but the literature addressing greenhouse gas emissions at the O & M stage is limited. A year-long study was conducted utilizing the deterioration method to calculate greenhouse gas emissions at the O & M stage of building life for condominium types of buildings in South Korea. Through this research, it is possible to analyze greenhouse gas emissions of buildings at the O & M stage, the longest span of the life cycle, and eventually help to calculate total greenhouse gas emissions over the life cycle of the building.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.35-47
• /
• 2018

Tree height is information that is used as a parameter for variety of tasks related to forests. Specifically, customized topics related to forests such as afforestation map are also used for production. In order to calculate tree height information, a field survey or drawing was using aerial photographs. However, there is a problem that is costing a lot of time and money. Therefore, it was suggested to calculate tree height using aerial photographs taken every two years. Thus, the method for calculating tree heights was validated by unmanned aerial photogrammetry, and tree heights were calculated using outputs generated by unmanned aerial photogrammetry applied to the unmanned aerial photograph and Aerial photograph DB. The comparison of calculated tree heights shows that the measures proposed in this study are efficient. and We expect to improve the usability of aerial photographs DB.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.11-19
• /
• 2016

The size of a display is large, The form becoming various of that do not apply to previous methods of gaze tracking and if setup gaze-track-camera above display, can solve the problem of size or height of display. However, This method can not use of infrared illumination information of reflected cornea using previous methods. In this paper, Robust pupil detecting method for eye's occlusion, corner point of inner eye and center of pupil, and using the face pose information proposes a method for calculating the simply position of the gaze. In the proposed method, capture the frame for gaze tracking that according to position of person transform camera mode of wide or narrow angle. If detect the face exist in field of view(FOV) in wide mode of camera, transform narrow mode of camera calculating position of face. The frame captured in narrow mode of camera include gaze direction information of person in long distance. The method for calculating the gaze direction consist of face pose estimation and gaze direction calculating step. Face pose estimation is estimated by mapping between feature point of detected face and 3D model. To calculate gaze direction the first, perform ellipse detect using splitting from iris edge information of pupil and if occlusion of pupil, estimate position of pupil with deformable template. Then using center of pupil and corner point of inner eye, face pose information calculate gaze position at display. In the experiment, proposed gaze tracking algorithm in this paper solve the constraints that form of a display, to calculate effectively gaze direction of person in the long distance using single camera, demonstrate in experiments by distance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.31-36
• /
• 2004

In comparison with in-plane lasers, predicting the output power and differential quantum efficiency of Vertical-Cavity Surface-Emitting Lasers(VCSELs) is very difficult due to the distributed Bragg reflector(DBR) layers. Therefore, effective cavity model and transfer matrix method have been adapted in order to calculate the output power and differential quantum efficiency The effective cavity model is inappropriate to calculate output power and differential quantum efficiency while it is practically adequate to calculate the threshold gain and threshold current density The reason is that the effective cavity model can not take account of the absorption in GaAs stack layer right below the metal aperture. In this paper, we have compared the threshold current and differential quantum efficiency calculated by using transfer matrix method with effective cavity model and we have made a study of the validity of the effective cavity model. Finally, we have confirmed the versatility of the transfer matrix method with these studies.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.82-89
• /
• 2011

Understanding snowmelt movement to the watershed is crucial for both climate change and hydrological studies because the snowmelt is a significant component of groundwater and surface runoff in temperature area. In this work, a new energy balance budget algorithm has been developed for melting snow from a snowpack at the Central Sierra Snow Laboratory (CSSL) in California, US. Using two sets of experiments, artificial rain-on-snow experiments and observations of diel variations, carried out in the winter of 2002 and 2003, we investigate how to calculate the amount of snowmelt from the snowpack using radiation energy and air temperature. To address the effect of air temperature, we calculate the integrated daily solar radiation energy input, and the integrated discharge of snowmelt under the snowpack and the energy required to generate such an amount of meltwater. The difference between the two is the excess (or deficit) energy input and we compare this energy to the average daily temperature. The resulting empirical relationship is used to calculate the instantaneous snowmelt rate in the model used by Lee et al. (2008a; 2010), in addition to the net-short radiation. If for a given 10 minute interval, the energy obtained by the melt calculation is negative, then no melt is generated. The input energy from the sun is considered to be used to increase the temperature of the snowpack. Positive energy is used for melting snow for the 10-minute interval. Using this energy budget algorithm, we optimize the intrinsic permeability of the snowpack for the two sets of experiments using one-dimensional water percolation model, which are $52.5{\times}10^{-10}m^2$ and $75{\times}10^{-10}m^2$ for the artificial rain-on-snow experiments and observations of diel variation, respectively.