• 폴리머
• /
• 제30권3호
• /
• pp.266-270
• /
• 2006

Poly [(dimethylmethylvinyl)siloxane 공중합체(PMViS)를 phosphorus oxychloride $(POCl_3)$와 반응시켜 poly [(dimethylmethylvinyl) siloxane] phosphine oxides (PMViSPO)를 제조하였다. Cadmium selenide (CdSe)는 cadmium oxide(CdO), tetradecylphosphonic acid(TDPA), trioctylphosphine oxide(TOPO)를 $300^{\circ}C$에서 반응시키고 여기에 Se를 용해시킨 tributylphosphine(TBP)과 trioctylphosphine(TOP)을 가한 다음 $320^{\circ}C$에서 반응시켜 제조하였다. 또한 CdSe 제조 용액에 PMViSPO를 가하여 CdSe-SPO adduct를 제조하였다. 백금 촉매 존재 하에서 $\alpha,\omega-vinyl$ poly(dimethylsiloxane) (VPMS), HPMS, CdSe 또는 CdSe-SPO를 고속 교반기에 취하고 컴파운딩하여 CdSe 함유 액상실리콘 고무 composite (LSRC-1)와 CdSe-SPO 함유 LSR composite (LSRC-2)를 제조하였다. 제조한 LSR composites 내에 함유된 형광 물질인 CdSe nanoparticles의 분산형태를 측정하여 입자 크기가 $30\sim50nm$인 입자가 균일하게 분포되어 있음을 확인하였고 LSRC-2의 분산도가 LSRC-1보다 우수함을 확인하였다. 또한 CdSe 입자의 개수를 측정한 결과 동일한 면적에 대하여 166개와 202개로 보다 많은 개수의 CdSe가 LSRC-2에 함유됨을 알 수 있었다. LSR composites의 열적 특성을 측정한 결과 CdSe-SPO가 함유된 LSRC-2의 열안정성이 높게 나타났다.

• Toxicological Research
• /
• 제25권3호
• /
• pp.140-146
• /
• 2009

This study was performed to evaluate the toxicity of cadmium selenide for a period of 28 days in Sprague-Dawley rats. Each of 10 healthy male and females rats per group received daily oral administration for 28-day period at dosage levels 30, 300 and 1,000 mg/kg of body weight. Mortality and clinical signs were checked, and body weight, water intake and food consumption were also recorded weekly. There were no dose-related changes in food consumption or urine volume. All animals survived to the end of study with no clinical signs or differences in body weight gain observed when compared with the control group. At the end of study, all animals including control group, were subjected to necropsy. Blood samples were collected for hematology tests including coagulation time and biochemistry analysis. Blood coagulation time and relative organ weight were unaffected by all received doses. White Blood Cell (WBC) counts significantly increased in the 300 mg/kg administered male animal group when compared to the control. Monocyte (MO) value were also increased significantly in both 300 and 1,000 mg/kg male animal group. However, Mean Corpuscular Volume (MCV) were significantly decreased compared with the control in the 1,000 mg/kg dose groups for male and female animals. Mean Corpuscular Hemoglobin (MCH) decreased significantly for female in the 300 and 1,000 mg/kg group compared to the control. Blood biochemical values of Inorganic phosphorus (IP) were significantly increased in both the 300 and 1,000 mg/kg dose groups in male animals when compared to the control. Creatinine (CRE) levels indicated significant increase in kidney function for the female, 30 mg/kg dose group when compared with control. There was a significant decrease in thymus absolute organ weight in the female, 1,000 mg/kg dose group when compared with control. Histopathological findings revealed no evidence of injury related to cadmium selenide except for one case of focal hepatic inflammation in the high dose (1,000 mg/kg) group. One case of lung inflammation was also seen in the control group. Basis on these result, the No Observable Adverse Effect Level (NOAEL) of cadmium selenide was determined to be more than 1,000 mg/kg/day for male and female rats under conditions in this study.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.198-202
• /
• 2006

Cadmium selenide (CdSe) nanoparticles with the diameter of about 3.4nm have been synthesized from the mixed aqueous solution of distilled water and diethanolamine at room temperature. The cadmium chloride ($CdCl_2$), sodium selenosulfate ($Na_2SeSO_3$) were used as the cadmium and selenium source, respectively. The properties of CdSe nanoparticles were characterized by using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and UV-Vis measurements. CdSe nanoparticles were analyzed to be cubic phase with the absorption excition peaks between 540 and 600 nm. CdSe nanoparticles also showed red-shifted excition peaks with increasing the sonication time. This paper mainly presents the sonication effects on the formation of CdSe nanoparticles prepared from the mixed aqueous solution of distilled water and diethanolamine.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.133-143
• /
• 1997

Piezoelastic materials have recently attracted considerable attention because of their potential use in intelligent structural systems. In this paper, we treat a transient piezothermoelastic problem in a hexagonal plate of crystal class 6mm subjected to antisymmetric heating temperature. We analyze this problem by use of the potential function method. Numerical calculations are carried out for a cadmium selenide solid, and the results are presented graphically in comparison with those derived from the similar problem in a cadmium selenide plate subjected to symmetric heating temperature for a symmetry transient problem.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.57.1-57.1
• /
• 2011

We studied the performance of CdSe nanoparticle in the active layer of organic photovoltaics (OPVs) by changing concentration of the CdSe NPs in the P3HT:PCBM layer. We observed that the absorption peak value gradually increases with the increasing amount of CdSe NPs at 600nm wave length. However, the electrical properties of OPVs correspond less with the tendency of UV/visible result. The highest performance was shown with 10% of CdSe NPs. The device performance decreased after 10% of CdSe NPs, this shows the dependencies of performanc of hybrid solar cells on the CdSe NPs loading amount. The resulting OPVs with 10 % of CdSe NPs show a short circuit current density ($J_{sc}$) of $6.96mA/cm^2$, open circuit voltage ($V_{oc}$) of 0.61V, fill factor (FF) of 0.59, and power conversion efficiency (PCE) of 2.53% under AM 1.5 ($100mW/cm^2$).

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.762-764
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• 제28권6호
• /
• pp.953-958
• /
• 2007

Anchoring quantum dots (QDs) onto thermodynamically stable, large band gap oxide semiconductors is a very important strategy to enhance their quantum yields for solar energy conversion in both visible and near-IR regions. We describe a general procedure for anchoring a few chalcogenide QDs onto the titanium oxide layer. To anchor the colloidal QDs onto a mesoporous TiO2 layer, linker molecules containing both carboxylate and thiol functional groups were initially attached to TiO2 layers and subsequently used to capture dispersed QDs with the thiol group. Employing the procedure, we exploited cadmium selenide (CdSe) and cadmium telluride (CdTe) quantum dots (QDs) as inorganic sensitizers for a large band gap TiO2 layer of dye-sensitized solar cells (DSSCs). Their attachment was confirmed by naked eyes, absorption spectra, and photovoltaic effects. A few QD-TiO2 systems thus obtained have been characterized for photoelectrochemical solar energy conversion.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.663-667
• /
• 2006

CTAB(cetyltrimethylammonium bromide)-capped CdSe nanoparticles were prepared by using a 4 : 1(v/v) distilled water-isopropyl alcohol mixture. The cadmium chloride and sodium selenosulfate were used as the cadmium and selenium source. By the analysis of XRD and XPS, the resultant particle was confirmed to be cubic CdSe phase. TEM image showed CdSe nanoparticles with empty core. The CTAB-capped sample showed an maximum absorption at 418nm, blue-shifting compared with bulk CdSe, which indicated stronger quantum confinement effect compared with uncapped sample. From FT-IR analysis, it was found that the presence of the new peaks in the $850{\sim}1250cm^{-1}$ range indicated the existence of chemical bonding between CTAB and surface of CdSe nanoparticles. Also TG analysis indicated that there were two weight-loss steps for the CTAB-capped CdSe nanoparticles. It was suggested that CTAB played a significant role in protecting CdSe nanoparticles.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.305.2-305.2
• /
• 2016

Tin monosulfide (SnS) is one promising candidate absorber material which replace the current technology based on cadmium telluride (CdTe) and copper indium gallium sulfide selenide (CIGS) for its suitable optical band gap, high absorption coefficient, earth-abundant, non-toxic and cost-effective. During past years work, thin film solar cells based on SnS films had been improved to 4.36% certified efficiency. In this study, Tin monosul fide was obtained by atomic layer deposition (ALD) using the reaction of Tetrakis (dimethylamino) tin (TDMASn, [(CH3)2N]4Sn) and hydrogen sulfide (H2S) at low temperatures (100 to 200 oC). The direct optical band gap and strong optical absorption of SnS films were observed throughout the Ultraviolet visible spectroscopy (UV VIS), and the properties of SnS films were analyzed by sanning Electron Microscope (SEM) and X-Ray Diffraction (XRD).

• Coupled systems mechanics
• /
• 제6권2호
• /
• pp.157-174
• /
• 2017

In the present investigation reflection and transmission of plane waves at an elastic half space and piezothermoelastic solid half space with fractional order derivative is discussed. The piezothermoelastic solid half space is assumed to have 6 mm type symmetry and assumed to be loaded with an elastic half space. It is found that the amplitude ratios of various reflected and refracted waves are functions of angle of incidence, frequency of incident wave and are influenced by the piezothermoelastic properties of media. The expressions of amplitude ratios and energy ratios are obtained in closed form. The energy ratios are computed numerically using amplitude ratios for a particular model of graphite and Cadmium Selenide (CdSe). The variations of energy ratios with angle of incidence are shown graphically. The conservation of energy across the interface is verified. Some cases of interest are also deduced from the present investigation.