• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1471-1479
• /
• 2008

In this paper, we propose a technique to improve Out-Of-Vocabulary(OOV) rejection algorithms in variable vocabulary recognition system which is much used in ASR(Automatic Speech Recognition). The rejection system can be classified into two categories by their implementation method, keyword spotting method and utterance verification method. The utterance verification method uses the likelihood ratio of each phoneme Viterbi score relative to anti-phoneme score for deciding OOV. In this paper, we add speaker verification system before utterance verification and calculate an speaker verification probability. The obtained speaker verification probability is applied for determining the proposed variable-confidence threshold. Using the proposed method, we achieve the significant performance improvement; CA(Correctly Accepted for keyword) 94.23%, CR(Correctly Rejected for out-of-vocabulary) 95.11% in office environment, and CA 91.14%, CR 92.74% in noisy environment.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.242-247
• /
• 2004

Conventional keyword spotting systems use the connected word recognition network consisted by keyword models and filler models in keyword spotting. This is why the system can not construct the language models of word appearance effectively for detecting keywords in large vocabulary continuous speech recognition system with large text data. In this paper to solve this problem, we propose a keyword spotting system using pseudo N-gram language model for detecting key-words and investigate the performance of the system upon the changes of the frequencies of appearances of both keywords and filler models. As the results, when the Unigram probability of keywords and filler models were set to 0.2, 0.8, the experimental results showed that CA (Correctly Accept for In-Vocabulary) and CR (Correctly Reject for Out-Of-Vocabulary) were 91.1% and 91.7% respectively, which means that our proposed system can get 14% of improved average CA-CR performance than conventional methods in ERR (Error Reduction Rate).

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2011

Sub-micrometer $La_{0.8}Ca_{0.2}CrO_3$ powders for ceramic interconnects of solid oxide fuel cells were synthesized by the aqueous combustion process. The materials were prepared from the precursor solutions with different glycine (fuel)-to-nitrate (oxidant) ratios (${\phi}$). Single-phase $La_{0.8}Ca_{0.2}CrO_3$ powders with a perovskite structure were obtained after combustion when ${\phi}$ was equal to or larger than 0.480. Especially, the stoichiometric precursor with ${\phi}$ = 0.555 yielded the spherical $La_{0.8}Ca_{0.2}CrO_3$ particles with 150-250 nm diameters after calcination at $1000^{\circ}C$. When compared with the powders synthesized by the solid-state reaction, the combustion-derived, fine powders exhibited improved sinterability, leading to near-full densification at $1400^{\circ}C$ in oxidizing atmospheres. Moreover, a small quantity of glass additives was used to reduce the sintering temperature, and considerable densification was indeed achieved at temperatures as low as $1100^{\circ}C$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.33-43
• /
• 2013

This paper proposes a distributed MAC protocol called Carrier Sensing Multiple Access with Collision Resolution (CSMA/CR) considering fully-connected single hop network environments for next-generation wireless LAN with high density of stations. The proposed CSMA/CR is compatible with the conventional MAC protocols by observing the operation of CSMA/CA and is able to detect a collision promptly without RTS/CTS exchange by applying the technique of CSMA/CD to wireless environments. Moreover, once a collision is detected, the dedicated resource is allocated to the next transmission and so the collision that may occur again is resolved. We investigate some implementation issues for the practicality of CSMA/CR and compare it with the typical distributed MAC protocols. The simulation results show that the proposed CSMA/CR has a low overhead as detecting a collision without the RTS/CTS exploitation and achieves always the best throughput regardless of the number of access stations, by using the reservation-based collision resolution technique.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2014

To prepare the hollow fiber nanofiltration composite membranes, the poly(vinylidene fluoride) (PVDF) membrane was hydrophilized with $K_2Cr_2OH$ and $KMnO_4$ aqueous solutions. And then the composite membrane was synthesized on that membrane surfaces using interfacial polymerization with piperazine (PIP) and trimesoyl chloride (TMC). The resulting membranes were characterized in terms of the rejection and flux for NaCl, $CaSO_4$, $MgCl_2$ 100 ppm solution and 300 ppm of NaCl and $CaSO_4$ mixed solution by varying the coating time, drying time, and the concentration of the coating materials. As a result, the higher rejections were shown for $K_2Cr_2OH$ solutionas a hydrophilization material, and the flux was enhanced while the rejection reduced as the hydrophilization time is longer. Also, the rejection increased and the flux reduced as the concentrations of triethyl amine (TEA) and sodium lauryl sulfate (SLS) were higher. Typically, the rejection 50% and flux 40 LMH for NaCl 100 ppm solution, and the rejection 55% and flux 48 LMH for $CaSO_4$ 100 ppm solution were obtained for the PVDF hollow fiber composite membrane prepared with the conditions of PIP 2 wt% (Triethyl amine (TEA) 7 wt%, SLS 20 wt% mixed solution against PIP concentration) and TMC 0.1 wt%.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.153-161
• /
• 2014

The purpose of this study is to evaluate effect of heavy metals (i.e., $Cu^{2+}$, $Zn^{2+}$, $Cr^{6+}$, $Cd^{2+}$, $Hg^{2+}$, and $Pb^{2+}$) to toxicity of Triclosan as binary mixture. The individual toxicity and combined toxic effects of Triclosan with heavy metals were evaluated by Vibrio fischeri assay. In individual toxicity, the $Hg^{2+}$ was found to be most toxic followed by Triclosan, $Pb^{2+}$, $Cr^{6+}$, $Cu^{2+}$, $Zn^{2+}$, and $Cd^{2+}$, respectively. To evaluate combined toxic effect, correlation analysis of 'predicted value' calculated by Concentration addition (CA) model and Independent action (IA) model with 'experimental value' were performed based on the toxicity of individual compound. As a result, all of the combinations showed that IA model were more correlated with experimental value than CA model. On the basis of the median effect concentration of combination ($EC_{50mix}$) predicted by IA model, experimental $EC_{50mix}$ of Triclosan + Cu, Triclosan + Zn, Triclosan + Pb, Triclosan + Hg, Triclosan + Cd, and Triclosan + Cr were 191%, 226%, 138%, 137%, 209%, and 138% of $EC_{50mix}$ predicted by IA model, respectively, indicating that all of the combinations produced antagonistic effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1755-1760
• /
• 2006

Studies were carried out at the National Institute of Animal Nutrition and Physiology, India to determine the effect of feeding chopped paddy straw (Oryza sativa) on the energy expenditure in crossbred cattle. Four crossbred cattle male, aged 5-6 years and weighing about 450 kg were used for this study. Three experimental trials, one each for the feeding of un-chopped paddy straw offered ad libitum (UCA), chopped paddy straw fed at restricted level (CR) and chopped paddy straw offered ad libitum (CA) were conducted. The quantity of un-chopped paddy straw consumed during UCA was assumed as the voluntary intake by the cattle and the same quantity was offered after chopping during CR. Each trial comprised of 21 d preliminary feeding period and 5 d of observation recording period. Expired gas was collected in Douglas bags using a face-mask and three-way valve at 6 hourly intervals i.e., at 09.30, 15.30, 21.30, and 03.30 h throughout the observation period. Expired gas and ambient air inspired by the animals were analyzed for the oxygen content through paramagnetic oxygen analyzer. Energy expenditure (EE) by the animals was calculated by determining the volume of oxygen consumed per minute (STP) and multiplying by 4.825. Paddy straw used in all the three trials contained (g/kg DM) 90.0 CP, 786 OM, 700 NDF, 489 ADF, 357 Cellulose and 60.0 ADL. Metabolizable energy (ME) was 6.9 MJ/kg DM. Dry matter intake (DMI) both in UCA and CR was about 6.8 kg, except that it was chopped in CR. Chopping has resulted in 32% improvement (9 kg) in DMI of CA as compared to that of UCA. Although ME intake was similar in UCA and CR (47.2 MJ/day), energy expenditure (EE) was higher in UCA (23.3 MJ) when compared to that of CR (19.5 MJ). The ME intake (63.3 MJ) as well as EE (27.1 MJ) was highest in CA. Energy expenditure when expressed as MJ/kg DMI was 3.48, 2.90 and 3.12; whereas as per cent of ME intake it was 50, 41 and 44 in UCA, CR and CA respectively. Our study has unequivocally confirmed that chopping of poor quality roughages like paddy straw has definite advantages not only in terms of improving the intake by decreasing the time taken for ingestion but also in reducing the energy cost of eating.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.54-58
• /
• 2013

Joint properties of vehicle ECU (Electric Control Unit) module which was manufactured by using Sn-Cu-Cr-Ca alloy were investigated. A new solder which has a middle melting temperature about $231^{\circ}C$ was fabricated as the type of 300um solder ball and paste type. The prototype modules were made by reflow process and measured spreadability, wettability shear strength and estimated interface reaction. The spreadability of the alloy was about 84% from the measurement of contact angle of the solder ball and the wetting force was measured 2mN. The average shear strength of the module which was manufactured by using the solder paste, was 1.9 $kg/mm^2$. Also, the thickness of IMC(intermetallic compound) was evaluated with various aging temperature and time in order to understand Cr effect on Sn-0.7Cu solder. $Cu_6Sn_5$ IMC was formed between Cu pad and the solder alloy and the average thickness of the $Cu_6Sn_5$ IMC was measured about 4um and it was about 50% of thickness of $Cu_6Sn_5$ IMC in Sn-0.7Cu. It is expected to have a positive effect on reliability of the solder joint.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.738-744
• /
• 2023

Graphene-based saturable absorbers (SAs) are widely used as laser mode-lockers at various laser oscillators. In particular, transmission-type graphene-SAs with ultrabroad spectral coverage are typically manufactured on transparent substrates with low nonlinearity to minimize the effects on the oscillators. Here, we developed two types of transmitting graphene SAs based on CaF₂ and ZnSe. Using the graphene-SA based on CaF₂, a passively mode-locked mid-infrared Cr:ZnS laser delivers relatively long 540 fs pulses with a maximum output power of up to 760 mW. In the negative net cavity dispersion regime, the pulse width was not reduced further by inhomogeneous group delay dispersion (GDD) compensation. In the same laser cavity, we replaced only the graphene-SA based on CaF₂ with the SA based on ZnSe. Due to the additional self-phase modulation effect induced by the ZnSe substrate with high nonlinearity, the stably mode-locked Cr:ZnS laser produced Fourier transform-limited ~130 fs near 2,340 nm. In the stable single-pulse operation regime, average output powers up to 635 mW at 234 MHz repetition rates were achieved. To our knowledge, this is the first attempt to achieve shorter pulse widths from a polycrystalline Cr:ZnS laser by utilizing the graphene deposited on the substrate with high nonlinearity.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.73-78
• /
• 2011

Weldability, especially HAZ cold cracking, weld metal solidification cracking, and HAZ liquation cracking susceptibilities, of ASTM A356 CA6NM martensitic stainless steel casting was investigated and compared with that of 9-12% Cr ferritic steel castings. Irrespective of the Cr and Ni content in the castings, the HAZ maximum hardness increased with an increase of carbon content. CA6NM steel, which has the lowest carbon content, had the lowest HAZ hardness and showed no cold cracking in y-slit cracking tests. CA6NM steel, meanwhile, showed the largest weld metal solidification cracking susceptibility in varestraint tests because of its higher amount of impurity elements, phosphorus, and sulfur. All castings investigated had good high temperature ductility in hot ductility tests and showed little difference in liquation cracking susceptibility.