• 한국자기학회지
• /
• 제13권3호
• /
• pp.115-120
• /
• 2003

스퍼터링 방법으로 FM/M/FM의 다층박막을 증착한 다음 초소형 박막 인덕터를 제작하기 위하여 반도체 공정을 대체할 수 있는 레이저 미세가공 기술을 개발하였다. TE $M_{00}$ 모드로 발진하는 CW Nd:YAG 레이저를 active Q-switching 하여 펄스폭이 200 ns인 극 초단 레이저 펄스를 얻었다. 레이저 미세가공 조건을 반복율 5 kHz, 펄스 당 에너지 5 mJ/pulse로 최적화 하여 분해능이 20 $\mu\textrm{m}$인 line patterning을 얻었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.75-75
• /
• 1997

• 대한의용생체공학회:의공학회지
• /
• 제37권4호
• /
• pp.134-139
• /
• 2016

US Food and Drug Administration (FDA) approved as a innovative cure for cancer, 1996. The effect is death of cancer cells through necrosis, apoptosis. Mainly the Continuous Wave mode (CW) use for PDT Laser. It sting, the question including itch, and etc. Reportedly, the increase of temperature with the perforated edema, ulcer, necrosis. The Thermal relaxation time and Oxygen recovery time is necessary. To give a normal oxygen recovery time of the cell, used Pulse mode. Progress, it was Burst Pulse mode when easing the thermal wake, the simplicity was secured, the PDT effect is good. Excepted in control group CW, Pulse, Burst pulse mode were incubated with various concentrations of 5-aminolevulinic acid hydrochloride (ALA-5). The tumor size reduction CW mode (44%), Pulse mode (48%), Burst pulse mode (53%) at 4 week after PDT with 0.3, 0.3, 0.3 mg/ml of ALA-5. After 4 hours, investigation of 100, 100, $100J/cm^2$ laser irradiation. The pulse mode was superior in expirimental data analysis. And it was the Burst pulse mode edge head of a family effect.

• 에너지공학
• /
• 제14권4호
• /
• pp.259-267
• /
• 2005

예혼합 분무화염의 상세한 연구기구를 관찰하기 위하여 예혼합 분무화염 중의 분무단면상의 확대촬영과 또한 연소시의 순간적 이차원 유동장을 얻기 위해 미소시간차를 가진 2연속 분무단면 화상에 대해 상호 상관 PIV를 적용하였다. PIV에 통상 사용되어지는 펄스 레이저가 아닌 연속발진 레이저를 PIV에 적용하는 기법 등을 나타내었다. 또한 통계적 PIV 해석법을 이용하여 얻은 상호상관 PIV의 결과를 PDA에 의해 측정된 결과와 비교하여, 상호상관 PIV는 PDA의 계측에 의한 결과와 잘 일치한다는 결론에 이르렀다. 연속발진 레이저를 이용한 상호상관 PIV를 예혼합 분무화염에 적용하여 본 연구에서 적용한 기법이 분무화염의 구조를 관찰하는데 매우 유용함을 검증하였다.

• 한국광학회지
• /
• 제12권1호
• /
• pp.48-54
• /
• 2001

광굴절 광기전력 특성을 갖는 Fe를 도핑한 LiNbO$_3$결정에서의 어두운 공간 솔리톤의 발생과 이의 광도파로 역할에 대해 연구하였다. 파장이 488nm인 cw $Ar^{+}$ 레이저를 이용하여 입사빔의 세기가 10mW/$cm^2$ 이하에서도 어두운 공간솔리톤이 발생됨을 관측하였다. 빔의 세기 변화 방향이 광축에 수직인 경우에는 자기확산 효과를 관측할 수 없었으나 광축에 평행한 경우에는 이 효과를 관측할 수 있었다. 이를 통해 매질에서의 굴절률 변화가 빔의 세기 변화 방향과 광축방향이 평행할 때만 일어남을 확인하였다 파장이 633nm인 He-Ne 레이저를 어두운 공간솔리톤에 통과시킴으로써 빔의 집속효과를 관측하였다. 이를 통해 어두운 공간솔리톤의 광도파로 역할을 확인하였다.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.90-99
• /
• 1992

In resent year Laser Speckle and its development have enabled surface deformation of engineering components and materials to be interferometrically examined. Laser Speckle- Pettern Interferometry Method is a very useful method for measuring In-plane components of displacement. In measuring thermal expansion coefficient, the various problems generated were established, and the measuring limitation examined. Metarial INCONEL 601 was used in experiments. Specimen was heated to the high temperature(100$0^{\circ}C$) by diong current to the direct two specimen. Then, those problems appear to the influence of back-ground radiation by the heated specimen, the influence by air turbulence, the oxidation of specimen. The color monitor and interference filter prevented the back-ground radiation by rad heat. The oxidation occuring in specimen itself was not generated by the being acid-proof excellence of material INCONEL 601. Yet, in this experiments, the serious problems are the oxidation of specimen and influence by air turbulence. By more reserching these problems forward, it is helpful that the thermal expansion coefficient of many materials is directly measured under high temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1821-1823
• /
• 2003

We propose a high voltage dc-dc converter for CW(continuous wave) $CO_2$ laser system using a current resonant half-bridge inverter and a Cockcroft-Walton circuit. This high voltage power supply includes a 2-stage voltage multiplier driven by a regulated half-bridge series resonant inverter. The inverter drives a step-up transformer and the transformer secondary is applied to the voltage multiplier. Thus, it has high efficiency because of the less switching losses by virtue of the current resonant half-bridge inverter, and also compact size, small parasitic capacitance in the transformer stage owing to the low number of a winding turn of the step up transformer secondary by combining with Cockroft-Walton circuit. We could be obtained the maximum laser output power of 44 W and the maximum system efficiency of over 16 %.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.33-39
• /
• 2019

We report development of a frequency-stabilized mid-infrared continuous-wave (cw) optical parametric oscillator (OPO) based on a fan-out grating MgO:PPLN crystal pumped at 1064 nm. The OPO resonator was designed as a pump-enhanced standing-wave cavity that resonates to the pump and signal beams. To realize stable operation of the OPO, we applied a modified Pound-Drever-Hall technique, which is a well-known method for powerful laser frequency stabilization. Tuning a poling period of the fan-out grating of the crystal allows wavelength-tunable OPO outputs from 1510 nm to 1852 nm and from 2500 nm to 3600 nm for signal and idler beams, respectively. At the idler wavelengths of 2500 nm, 3000 nm and 3500 nm, we achieved more than 50 mW of output powers at a pumping power of 1.1 W. The long-term stability of the OPO was confirmed by recording the power and wavelength variations of the idler for an hour.

• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.193-196
• /
• 2003

We have developed a laser welding monitoring system to monitor laser welding process conditions such as sample feed rate, laser focal position, and laser power. A 2 ㎾ Nd:YAG CW laser beam has been applied to the welding of a stainless steel plate (SUS306) to investigate the welding monitoring. Theradiation signal from the weld pool was guided back through the focusing optics and the laser delivery fiber, and measured by a photo detector. By changing the focus of the laser beam along the z-direction, the penetration depth of the welding material has been measured. That shows the penetration depth depends on the frequency fluctuations of the plume signals which can be used in welding quality control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.932-935
• /
• 2005

Three dimensional laser welding technology for light car body is studied. A robot, a seam tracking system and 4kW CW Nd:YAG laser are used for three dimensional robot laser welding system. The Laser system is used 4kW Nd:YAG laser(HL4006D) of Trumpf and the Robot system is used IRB6400R of ABB. The Seam tracking system is SMRT-20LS of ServoRobot. The welding joint of steel plate are butt and lap joint. The 3-D welding for Non-linear Tailored blank is performed after the observation experiments of bead on plate. Finally, the welding process for non-linear tailored blank and front side member is developed.