• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.71-83
• /
• 1997

In recent years, various kinds of organic photoreceptors have been used for copy machines based on electrophotography. Most of them are constructed into layered devices in which a photogeneration layer is separated from a charge transport layer. They are usually used with application of negative charges. Organic pigment have received considerable attention with phthalocyanine, squaraine, and azo compounds being used to construct zerograpgic photoreceptors with enhanced long wavelength sensitivity, residual potential and zerograpgic gain of squaraine photoconductor were measured from the photoinduced discharge curve. Most of synthesized squaraine derivative couldn`t use for CGM(charge generation material), but it knew that a part of one was able to use it within the possibility. A few appliance is used it know about dependence on CTM(charge transport material) of squaraine derivative. It could know that experiment`s result is 2.5-bis(4-N-N`-diethylaminophenyl)-1,3,4-oxadiazole(OXD) is the bestproduct.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.508-509
• /
• 2003

대기 중 입자상 물질의 건식 침적 속도는 그 과정의 복잡성으로 인해 모형을 이용한 연구 시 종종 일정한 값으로 간주되어 왔다. 그러나 입자상 물질의 전체 침적 속(flux)에서 건식 침적 속(flux)이 차지하는 부분은 무시할 수 없는 양이며, 따라서 입자상 물질의 기후 및 환경에 대한 영향을 평가하기 위해서는 이 과정의 정량적인 추정이 필요하다. 본 연구는 프랑스 기상청(Meteo-France)의 대기화학수송모형(CTM)인 MOCAGE에 에어로졸 모듈을 개발하는 일환으로 지표 특성 및 지표 가까이의 미기상학적 조건 등을 고려하여 입자 크기 별 입자상 물질의 건식 침적 속도를 모수화 하였다.(중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.658-667
• /
• 1996

A computer vision system was developed to automatically detect and locate the oyster hinge line, one step in shucking an oyster. The computer vision system consisted of a personal computer, a color frame grabber, a color CCD video camera with a zoom lens, two video monitor, a specially designed fixture to hold the oyster, a lighting system to illuminate the oyster and the system software. The software consisted of a combination of commercially available programs and custom designed programs developed using the Microsoft CTM . Test results showed that the image resolution was the most important variable influencing hinge detection efficiency. Whether or not the trimmed -off-flat-white surface area was dry or wet, the oyster size relative to the image size selected , and the image processing methods used all influenced the hinge locating efficiency. The best computer software and hardware combination used successfully located 97% of the oyster hinge lines tested. This efficienc was achieve using camera field of view of 1.9 by 1.5cm , a 180 by 170 pixel image window, and a dry trimmed -off oyster hinge end surface.

• The Journal of Korean Physical Therapy
• /
• v.14 no.3
• /
• pp.345-354
• /
• 2002

A Study of Clinical Application of the Connective Tissue Massage General massage is termed kneading and rubbing. It will bring the effect of blood volume and cardiovascular reaction. Connective tissue massage is a diagnostic and treatment method. But the general massage has not diagnostic aspect. Connective tissue massage techniques are stimulating and stretching the LCT, mast cell, collagenous fiber, fascia, skin, muscle and nerve tissue. Diagnostic aspects of connective tissue massage are visible investigation, manual investigation, and stroking on the reflex zone. CTM do stroking with 3, 4th finger tips on the whole body for the treatment.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.558-560
• /
• 1998

The operation of robot manipulators has a restriction that the operator must reside at the factory, where the manipulator is used. To overcome this restriction, we propose a remote control system using the internet, the system which runs on the Window 95 environment is composed of the remote client which transfers commands to the server which control and manage the manipulator in the factory. In the control of Hong-ik Direct Drive Arm, it is necessary to consider the complex nonlinear parameters causing the mutual interaction between joints, so we use two TMS320C31 DSP chips in the controller for the real time dynamic control algorithms. For the test of system integrity and the verification of the mathematical modeling, we apply CTM, PD and VSS control algorithms and the simulation results are satisfactory.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3158-3163
• /
• 2021

Chromium material is commonly used for fusion plasma facing applications because of the low neutron activation property. The Monte Carlo method is one of the useful ways to investigate the ion-target interactions. In this study, Chromium target irradiated by protons was investigated using Monte Carlo based simulation tools. In this context, the calculations of radiation damage on Chromium material irradiated with protons at 17.9 and 22.3 MeV energies were carried out using GEANT4 and SRIM codes. Besides, the cross sections for proton interaction with Chromium target were calculated by the TALYS 1.9 code using CTM + FGM, BSFGM, and GSFM level densities. As a result, GEANT4, SRIM and TALYS 1.9 codes provide a suitable tool for the predictions of radiation damage and cross cross section with proton irradiation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.343-344
• /
• 2009

The aim in this paper is to show how to extract scalp of a series of brain MR images by using region growing segmentation algorithm. Most researches are all forces on the segmentation of skull, gray matter, white matter and CSF. Prior to the segmentation of these inner objects in brain, we segmented the scalp and the brain from the MR images. The scalp mask makes us to quickly exclude background pixels with intensities similar those of the skull, while the brain mask obtained from our brain surface. We make use of connected threshold method (CTM) and confidence connected method (CCM). Both of them are two implementations of region growing in Insight Toolkit (ITK). By using these two methods, the results are displayed contrast in the form of 2D and 3D scalp images.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.177-178
• /
• 2006

The results of monotonic and cyclic uniaxial compression tests, in which the deviatoric component of the stress is predominant, carried out on green and recrystallized iron compacts with different levels of density are presented and discussed in order to analyse the macro and micro-mechanisms governing the mechanical behaviour of non-sintered PM materials. The plastic deformation of the particles, especially at the contact areas between neighbouring grains, produces an internal friction responsible for the main features observed in the behaviour of green metallic compacts. These results show important discrepancies with the plasticity models, Cam-Clay and Drucker-Prager Cap.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.97-106
• /
• 2010

In this paper, lane and curvature detection algorithm based on the curve template matching method is proposed. To eliminate the perspective effect of the original image, the input image is transformed to a top view image. From this top view image, its edge image is created. To increase the accuracy of detection, a novel edge detection method, which shows a strength in lane detection, is proposed. In the first step, straight lanes are detected from the edge image, and then the Curve Template Matching(CTM) method is applied to detect the curved lanes and to find their curvatures. Since the proposed CTM method uses only the simple equations, such as line and circle equations, to detect the curved lane, the algorithm is simple. Moreover, we used the detected lane information in the previous frames to detect the current frame's lanes, the detection results become more reliable. The proposed algorithm has been tested in various road conditions (highway, urban street, night time highway, etc.). Experimental results show that the proposed algorithm can process about 70 frames per second with the successful lane detection rate over 95% and curvature detection rate about 90%.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.141-154
• /
• 2020

The accidents of toxic chemical spill into rivers are increasing in recent years due to expansion of heavy industries in Korea. In order to respond to the chemical spills, accident response systems have been established for both main rivers and tributary rivers. However, since these accident response system adopted the water quality models imported from the foreign countries, it is difficult to acquire the model parameters and to calibrate and validate the water quality models. Therefore, this study developed a depth-averaged two-dimensional river water quality model to analyze the behavior of hazardous chemicals in rivers and proposed an efficient simulation execution framework by identifying the significant reaction mechanisms considering the characteristics of the toxic chemicals. The depth-averaged two-dimensional river water quality model CTM-2D was upgraded by adding reaction terms representing mechanisms of the adsorption, desorption, and volatilization of toxic chemicals. In order to verify the model, the analytical solution was compared with the numerical solution, and results showed that the error was less than 0.1%. In addition, the model was applied to a virtual scenario which is a water pollution accident at the confluence of the Nakdong River - Kumho River, and model results showed that an efficient simulation could be carried out by activating only significant reactions which were assessed by the sensitivity analysis.