• 한국자기학회지
• /
• 제1권2호
• /
• pp.55-59
• /
• 1991

희토류-3d 천이원소인 비정질${[{(Fe_{80}CO_{20})}_{0.98}RE_{0.02}]}_{80}B_{20}(RE=Nd,\;Sm,\;Gd,\;Tb)$ 합금 리본시료에 대한 자기적 성질을 조사하기 위하여 시료진동형 자력계(vibrating sample magnetometor)를 이용하여 77 K부터 900 K까지의 온도 영역에서 포화자화 값을 온도의 함수로 측정 한후, Curie 온도 ($T_{c}$)와 Bloch 상수등을 추정하였다. 이들로 부터 spin wave stiffness 상수, 교환상호작용(exchange interaction)의 범위와 평균자승거리($$)등을 계산하였으며 각 희토류 원소에 대한 치환효과를 비교 분석하였다.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.97-102
• /
• 2000

Pitch precursors were synthesized from coal tar(CT) and pyrolysis fuel oil(PFO, petroleum residue oil) at relatively low temperature of $250^{\circ}$, in the presence of horontrifluorideidiethyletherate complex(BFDE) as a catalyst and nitrobenzene(NB) as a co-catalyst. The softening point, nitrogen content and carbon yield increased with an increase of concentration of NB. The pitch precursors with good spinnability were prepared by removing the volatile components through $N_2$ blowing. The precursor pitches were spun through a circular nozzle, stabilized at $310^{\circ}$ and finally carbonized at $1000^{\circ}$. The optically anisotropic structure formed at the absence of NB was changed into isotropic structure, showing a decrease in size of the flow domain. The hollow carbon fiber could be prepared in the process of stabilization. The results proposed that the morphology of carbon materials could be controlled by changing the concentration of catalyst and/or co-catalyst and/or stabilization condition that affect on the mobility of molecules during carbonization.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.739-747
• /
• 2011

Objective: The present study evaluated information presentation methods applicable to a wearable Braille display in terms of performance and satisfaction measures. Background: A Braille display wearable at a finger can improve accessibility of information for the blind by presenting information in real time. Method: A Braille display with six pins operated by DC servomotors was developed to simulate four information presentation methods(active, stationary, simultaneous, and sequential methods). An evaluation experiment was conducted with 16 participants(8 normal and 8 blind participants) by using three objective measures(reaction time, RT, unit: sec; recognition time, CT, unit: sec; correct response percentage, CP) and two subjective measures(overall satisfaction, OS; perception easiness, PE) with a 7-point scale. Results: The average RTs and CTs of the active and stationary methods were significantly shorter than those of the simultaneous and sequential methods for the blind participants. Also, the average CPs, OSs, and PEs of the active and sequential methods were significantly higher than those of the stationary and simultaneous methods. Conclusion: The active and sequential methods were preferred to the other methods for the blind. Application: The performance characteristics identified in the present study for the four braille display methods can be utilized to develop an effective wearable Braille display system.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.29-34
• /
• 2017

Increased demand for parts with micro-pattern structure made of metals, ceramics, and composites in various fields such as medical ultrasonic sensors, CT collimators, and ultra-small actuator parts. Micro powder injection molding (PIM) is a technology for manufacturing micro size, high volume, complex, precision, net-shape components from either metal or ceramic powder. In the present study, a standard mold with a variable insert core capable of producing various micro patterns was investigated. An injection molding test was performed on a standard mold using a line type micro-pattern core having an aspect ratio of 2, a slenderness ratio of 70, a pattern size of $200{\mu}m$, and a pattern spacing of $150{\mu}m$. During the filling process, the deformation of the mold with large aspect ratio and slenderness ratio was analyzed by the experiment and the numerical simulation according to the position of the gate. We proposed a mold structure that minimizes mold deformation by gate modification and enables uniform pattern filling behavior.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.465-472
• /
• 2016

A study was carried out to investigate typical features of natural supercavitation generated behind axisymmetric bodies such as disk and cone shaped cavitators. Main focuses of the study were to observe formation process of the supercavity and to measure drag forces acting on cavitators. Experiments were carried out at the cavitation tunnel of the Chungnam National University (CNU-CT), which has a capability to make sufficient flow speed for supercavitation experiments and to remove broken cavity bubbles coming back to the test section. Blockage effects on supercavity dimensions were evaluated and an effort was made to correlate tunnel experiments with unbounded flow. On the basis of experimental and numerical results, geometrical features of supercavities and characteristics of drag forces were examined and their relations were proposed.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.191-201
• /
• 2019

Finite element analysis is one of the most used tools for studying femoral neck fracture. Nerveless, consensus concerning either the choice of material characteristics, damage law and /or geometric models (linear on nonlinear) remains unreached. In this work, we propose a numerical quasi-brittle damage model to describe the behavior of the proximal femur associated with two methods to evaluate the Young modulus. Eight proximal femur finite elements models were constructed from CT scan data (4 donors: 3 women; 1 man). The numerical computations showed a good agreement between the numerical curves (load - displacement) and the experimental ones. A very encouraging result is obtained when a comparison is made between the computed fracture loads and the experimental ones ($R^2=0.825$, Relative error =6.49%). All specific numerical computation provided very fair qualitative matches with the fracture patterns for the sideway fall simulation. Finally, the comparative study based on 32 simulations adopting linear and nonlinear meshing led to the conclusion that the quantitatively results are improved when a nonlinear mesh is used.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.345-354
• /
• 2014

목 적 : $Fraxion^{(R)}$ system과 s-thermoplastic mask을 사용하여 뇌 전이(Brain metastasis)가 있는 환자에게 정위적 방사선 수술(Stereotactic Radiosurgery, SRS)을 시행하면서 발생 되는 환자의 셋업 오차(Setup Error)를 비교하고 오차가 선량에 미치는 영향을 측정하여 $Fraxion^{(R)}$ system의 유용성을 평가하고자 한다. 대상 및 방법 : 2014년 5월부터 2014년 10월까지 본원에 내원하여 정위적 방사선 수술을 받은 뇌 전이(Brain metastasis) 환자 6명을 대상으로 하였다. 머리를 고정하기 위해 3명은 s-thermoplastic mask와 mouthpiece를 이용한 그룹과 3명은 $Fraxion^{(R)}$ system을 이용하여 제작 한 2그룹으로 나눈 뒤 방사선 수술 당시 얻어진 3D 콘빔CT(Cone Beam Computerized Tomography, CBCT) 영상과 전산화 단층모의치료 영상의 오차 값을 기록하고 환자별 최대치(Max), 최소치(Min), 평균치(Mean), 표준편차(standard deviation, SD) 구하여 비교하였다. 또한 StereoPHAN Phantom 및 Pinpoint 3D cylindrical chamber를 이용하여 환자별 정도관리(Patient Specific Quality Assurance, PSQA)와 같은 방법으로 선량을 측정하여 선량값을 비교하였다. 결 과 : 정위적 방사선 수술 전 콘빔CT 영상과 전산화단층모의치료영상을 비교하여 얻어진 셋업 오차의 경우 $Fraxion^{(R)}$ system이 s-thermoplastic mask와 mouthpiece를 함께 사용한 경우보다 셋업 오차가 평균을 기준으로 X축 83% 감소, Y축 40% 감소, Z축 92% 감소하였으며 X, Y, Z 회전성분인 Pitch 64% 감소, Roll 88% 감소, Yaw 87% 감소로 모든 방향에서 상대적으로 이동 값이 적었으며 선량 측정을 시행한 결과는 평균을 기준으로 s-thermoplastic mask와 mouthpiece를 사용한 경우가 $Fraxion^{(R)}$ system보다 셋업 오차 보정 전은 83% 감소, 보정 후는 1.9% 감소된 선량측정을 보였다. 결 론 : $Fraxion^{(R)}$ system은 개인 치열(dentition)에 맞춘 구강고정기구(mouthpiece)와 Fraxion frame, Frontpiece, thermoplastic mask nose을 사용하여 s-thermoplastic mask와 mouthpiece를 가지고 머리를 고정하는 기존의 방식보다 높은 재현성을 보였으며 이는 기존의 치료 방법보다 1회 치료로 많은 선량이 조사되는 뇌 정위적 방사선 수술에서 안정된 고정 효과를 나타낼 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권6호
• /
• pp.552-558
• /
• 2005

Orthognathic surgery changes patient's mandibular position and environment of related anatomic structures. Many clinicians were interested in these changes and studied about this problem. However, most of them were based on two dimensional cephalogram. According to the development of image and computer system, it would be possible that the airway change is analyzed with three dimensional CT. So we tried to measure the volumetric change of airway and analyzed the relationship between the airway structure and volumetric change. Nineteen patients who experienced orthognathic surgery due to mandibular prognathism were analyzed with 3D CT data (preoperative and postoperative 6 months) and 2D lateral cephalometry. Volumetric change was measured and 3 dimensional change of related structure was assessed with simulation program ($V-works^{(R)}$, 4.0 Cybermed, Korea). Ten patients showed the decrease of airway volume change and nine showed the increase of airway volume change. Volumetric change was determined by dimensional change of mandible and hyoid bone. The dimensional positions of mandible and hyoid bone were the key factor for determining the airway change after surgery. Airway change is also predictable with the dimensional change of mandible and hyoid bone.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.3045-3050
• /
• 2013

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.30.1-30.7
• /
• 2017

Background: The positions of the mandibular lingula and foramen have been set as indexes for inferior alveolar nerve (IAN) block and ramus osteotomies in orthognathic surgery. This study aimed to evaluate the anatomical structures of mandibular ramus, especially the mandibular lingula and foramen, by analyzing the cone-beam computed tomography (CBCT) data of young adults. Methods: We evaluated 121 sides of hemi-mandibular CBCT model of 106 patients (51 male and 55 female patients; 18 to 36 years old). All the measurements were performed using the 2- and 3-dimensional rulers of $OnDemand3D^{(R)}$ software. Results: Statistical analysis of the data revealed that there was no significant difference in the mandibular angle between the genders. The mandibular lingula was found to be located at the center of ramus in males, but a little posterior in relation to the center in females. The mandibular lingula was rarely located below the occlusal plane; however, the position of the mandibular foramen was more variable (84.3% below, 12.4% above, and 3.3% at the level of the occlusal plane). Conclusions: The results of this study provide a valuable guideline for IAN block anesthesia and orthognathic surgery. CBCT can be considered effective and accurate in evaluating the fine structures of the mandible.