• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1025-1030
• /
• 2001

As the pre-stage of making 3D stabilizing systems, at this paper designed 2D stabilizing system. This is composed of two axes stabilizing platform to preserve targeted direction while vehicle is moving. The system maintains stabilization by recovering error using the rate gyro with DSP TMS320F240 as controller, vibratory rate gyro (Tokimec co. TFG -l60D) as gyro scope, SD1015B52-1·SD1004C04-l/DM1015B DM1004C as direct drive driver/motor, PI control as control algorithm. This paper got a comparably good stabilization.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.304-308
• /
• 2002

We demonstrate a simple pulsed $CO_2$ laser with millisecond long pulse duration in a tube at a low pressure of less than 30 Torr. The novel power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply doesn't need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. To control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of SCR(Silicon Controlled Rectifier) gate is varied from 30。 to 150。. A ZCS (Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control precisely the gate signal of the SCR. The maximum laser output of 35 W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60 Hz, and a SCR gate firing angle of 90。 . In addition, the resulting laser pulse width is approximately 3㎳(FWHM). This is a relatively long pulse width, compared with other repetitively pulsed $CO_2$ lasers.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.799-806
• /
• 2012

This experiment was conducted to establish the optimum conditions for high $CO_2$ gas treatment in combination with a proper gas-permeable packaging film to maintain the quality of fig fruit (Ficus carica L). Among the fig fruits with different high $CO_2$ treatments, the quality change was most effectively controlled during storage in the 70%-$CO_2$-treated fig fruit. Harvested fig fruit was packaged using microperforated oriented polypropylene (MP) film to maintain the optimum gas concentrations in the headspace of packaging for the modified-atmosphere system. MP film had an oxygen transmission rate of about $10,295cm^3/m^2$/day/atm at $25^{\circ}C$. The weight loss, firmness, soluble-solid content (SSC), acidity (pH), skin color (Hunter L, a, b), and decay ratio of the fig fruits were monitored during storage at 5 and $25^{\circ}C$. The results of this study showed that the OPP film, OPP film + 70% $CO_2$, and MP film+70% $CO_2$ were highly effective in reducing the loss rate, firmness and decay occurrence rate of fig fruits that were packaged with them during storage. In the case of using treatments with packages of OPP film and OPP film+70% $CO_2$, however, adverse effects like package bursting or physiological injury of the fig may occur due to the gas pressure or long exposure to $CO_2$. Therefore, the results indicated that MP film containing 70% $CO_2$ can be used as an effective treatment to extend the freshness of fig fruits for storage at a proper low temperature.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.35-41
• /
• 1998

This study was carried out to investigate the development rates of human embryos co-cultured with cumulus cells to each blastocyst stage. Human zygotes were co-cultured on cumulus cell monolayer in YS medium supplemented with 20% hFF. On day 2, if patient had four or more "good" embryos (regular blastomeres without fragmentation), embryos were further cultured for 72hrs. Blastocysts on day 5 were classified into early blastocyst (ErB), early expanding blastocyst (EEB), middle expanding Blastocyst (MEB), and expanded blastocyst (EdB) on the basis of their morphological aspects of trophectoderm cells and blastocoele. Subsequently, maximum 3 of best blastocysts were transferred in 486 cycles. The results in this study were as follows: Patients who had four or more "good" embryos on day 2 were 498 persons, but patients whose embryos could not be transferred due to failure in development to the blastocyst stage on day 5 were 12 persons (2.4%). The development rate of embryos to the blastocyst stage was 58.2% (2,885/4,957) on day 5, and the rates that developed to the ErB, EEB, MEB, and EdB stage were 15.0% (743/4,957), 14.9% (739/4,957), 14.4% (714/ 4,957), and 13.9% (689/4,957), respectively. Total 1366 blastocysts were transferred in 486 cycles (mean number=2.81). The implantation rate and the ongoing implantation rate obtained by observing the number of G-sac and FHB were 29.9% (409/1,366) and 22.5% (308/1,366), respectively. The clinical pregnancy rate was 51.2% (249/486), and the ongoing pregnancy rate' was 39.1% (190/486). Among women showing ongoing pregnancy, women with singleton were 50% (95/190), women with twin were 37.9% (72/190), and women with triplet were 12.1% (23/190). Although triplet pregnancy rate in this study was high such as 12.1%, because many blastocysts with high viability were produced in our co-culture system using cumulus cells on day 5, we really believe that a multiple pregnancy except twin should not occur by selecting good embryos for maximum two blastocyst transfer. These results demonstrate that autologous cumulus cells may be used for the production of blastocysts with high developmental competence, and the use of autologous cumulus cells to be collected easily, and to be treated conveniently at OPU must be an effective means for obtaining high implantation and pregnancy rate.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1992.12a
• /
• pp.14-14
• /
• 1992

시설원예에 있어서 작물의 생장량을 촉진시켜 수확시기를 앞당기고, 생산량을 증가시키며, 품질을 향상시키기 위하여 탄산가스를 시비하는 재배방법이 도입되고 있다. 그러나 탄산가스의 시비가 작물에 악영향을 주는 경우도 보고되고있어 탄산가스 시비에 주의를 기울여야 한다. 기존의 탄산가스 시비방법은 일정한 농도를 유지하는 것으로 탄산가스 낭비나 고농도에 의한 생육장애 혹은 탄산가스 결핍을 초래하는 등의 문제점을 갖고 있다. (중략)

• Journal of Industrial Technology
• /
• v.1
• /
• pp.47-51
• /
• 1981

A Kinetic model of desorption of hydrogen in $Dy_2Co_7-H$ system has been suggested and rate equation of each step of the model has been compared with experimental results. The reat controlling step was hydrogen recombination in metal surface. The activation energy of over-all reaction was about 23kcal/mole.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.18-25
• /
• 2017

The study for the combustion characteristics of propellants for nozzleless boosters was carried out. The metal fuels of Al and Zr were introduced into solid propellant formulations in order to enhance the density-specific impulse and the high burning rate with low pressure exponent was investigated as the major combustion characteristic of propellant to design nozzleless boosters. The burning rate of Zr-containing propellant was higher than Al-containing propellant and, $13{\mu}m$ Zr-containing propellant exhibited the burning rate of 35 mm/s (at 1000 psi)and pressure exponent of 0.3282. The benefit of using Al and Zr-containing propellant into nozzleless boosters was demonstrated in these results.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1295-1300
• /
• 2010

The $CO_2-CH_4$ reaction catalyzed by Ni/silicon wafers was kinetically studied by using a photoacoustic technique. The catalytic reaction was performed at various partial pressures of $CO_2$ and $CH_4$ (50 Torr total pressure of $CO_2/CH_4/N_2$) in the temperature range of 500 - $650^{\circ}C$ in a static reactor system. The photoacoustic signal that varied with the $CO_2$ concentration during the catalytic reaction was recorded as a function of time. Under the reaction conditions, the $CO_2$ photoacoustic measurements showed the as-prepared Ni thin film sample to be inactive for the reaction, while the $CO_2/CH_4$ reactions carried out in the presence of the sample pre-treated in $H_2$ at $600^{\circ}C$ were associated with significant time-dependent changes in the $CO_2$ photoacoustic signal. The rate of $CO_2$ disappearance was measured from the $CO_2$ photoacoustic signal data in the early reaction period of 50 - 150 sec to obtain precise kinetic data. The apparent activation energy for $CO_2$ consumption was determined to be 6.9 kcal/mol from the $CO_2$ disappearance rates. The partial reaction orders, determined from the $CO_2$ disappearance rates measured at various $PCO{_2}'S$ and $PCH{_4}'S$ at $600^{\circ}C$, were determined to be 0.33 for $CH_4$ and 0.63 for $CO_2$, respectively. Kinetic data obtained in these measurements were compared with previous works and were discussed to construct a catalytic reaction mechanism for the $CO_2-CH_4$ reaction over Ni/silicon wafer at low pressures.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.104-108
• /
• 2018

Grain-growth behavior in the $95Na_{1/2}Bi_{1/2}TiO_3-5BaTiO_3$ (mole fraction, NBT-5BT) system has been investigated with the addition of $Na_2CO_3$. When $Na_2CO_3$ is added to NBT-5BT, the growth rate is higher than desired and grains are already impinging each other during the initial stage of sintering. The grain size decreases as the sintering temperature increases. With the addition of $Na_2CO_3$, a liquid phase infiltrates the interfaces between grains during sintering. The interface structure can be changed to be more faceted and the interface migration rate can increase due to fast material transport through the liquid phase. As the sintering temperature increases, the impingement of abnormal grains increases because the number of abnormal grains increases. Therefore, the average grain size of abnormal grains can be decreased as the temperature increases. The phenomenon can provide evidence that grain coarsening in NBT-5BT with addition of $Na_2CO_3$ is governed by the growth of facet planes, which would occur via mixed control.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.