• Title/Summary/Keyword: CO 전환율

Search Result 339, Processing Time 0.042 seconds

Emulsion Polymerization of Vinyl acetate-Butyl acrylate Copolymer (유화 중합에 의한 비닐 아세테이트-부틸 아크릴레이트 공중합체의 합성 연구)

  • 설수덕;임종민
    • Polymer(Korea)
    • /
    • v.28 no.2
    • /
    • pp.135-142
    • /
    • 2004
  • Poly(vinyl acetate) (PVAc) prepared by emulsion polymerization has broad applications for additives such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly(vinyl acetate-co-butyl acrylate) (VVc-BA) was synthesized using potassium persulfate as catalyst and poly(vinyl alcohol) (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced colloid stability, adhesion, tensile strength and elongation. During VAc-BA emulsion polymerization, no coagulation and complete conversion occur with the reactant mixture of 0.7wt% potassium persulfate, 15wt% poly(vinyl alcohol) (PVA-217), and the balanced monomer that the weight ratio of vinyl acetate to butyl acrylate is 19. As the concentrations of PVA increase, the copolymerization becomes faster and polymer particles are more stable, resulting in enhanced mechanical stability of the VAc-BA copolymer. However, the size of the polymer particles decreases with increasing PVA contents. Properties of the VAc-BA copolymer, such as minimum film formation temperature, glass transition temperature, surface morphology, molecular weight and molecular weight distribution, tensile strength and elongation, were characterized using differential scanning calorimeter, transmission electron microscope and other instruments.

Treatment of Organic Wastes and Reuse of Bio-energy from the Anaerobic Digestion - Thermophilic Oxic Precess (혐기성 소화-고온 호기법에 의한 유기성폐기물의 처리와 생성열의 재활용 검토)

  • Yang, Jae-Kyung;Choi, Kyung-Min
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.9 no.1
    • /
    • pp.79-89
    • /
    • 2001
  • Anaerobic Digestion - Thermophilic Oxic Process(ADTOP) has been known to be one way reducing and composting of organic wastes without draining or forming excess sludge. It could be completely performed by the evaporation of water using the bio-energy from the microbial degradation of organic. In the present study the complete treatment of Chinese restaurant wastes was conducted and utility of bio-energy produced from the ADTOP was estimated. Base on results, it could be concluded as follows; 1) chinese restaurant wastes could be completely treated using the TOP without draining or excess sludge. Maximum volumetric loading rate was determined as $55.0kg-garbage/m^3$. Input water was almostly evaporated and 90.5% of carboneous organic wastes was conversed to carbondioxide. 2)The optimum volumetric loading rate which is acceptable to maintain over $55^{\circ}C$ in the anaerobic digester was determined as $45kg-garbage/m^3{\cdot}d$. 3) The optimum HRT was at least over 10 days in order to maintain about $50^{\circ}C$ in the anaerobic digester using bio-energy produced from TOP. Therefore the utilization of bio-energy produced from TOP could be used in the process which had long HRT such as the anaerobic digestion. 4) The efficiency of anaerobic digester rate were over 90% by the ADTOP under the organic loading rate of $1.1kg-COD/m^3{\cdot}d$, 50kg-Chinese restaurant garbage and $250{\ell}/m^3{\cdot}min$ of the aeration rate.

  • PDF

Vinegar Produced from Chrysanthemum zawadskii and Pearl Shell (구절초진주식초)

  • Ann, Yong-Geun;Oh, Moon-Hun;Lee, Byung-Yup
    • The Korean Journal of Food And Nutrition
    • /
    • v.25 no.1
    • /
    • pp.90-98
    • /
    • 2012
  • With the addition of ethanol to wax gourd extract and by acetic fermentation, 5.0% acidity vinegar was produced. After putting 10% extract(10% concentration) of Chrysanthemum zawadskii in this, and by dissolving shell, Chrysanthemum zawadskii-pearl vinegar was produced. When a 1% of ark shell, oyster shell, or ear shell was added to wax gourd vinegar, 95.6~98.4% of the shell dissolved, and when a 2% content of shell was added, 97.2~98.4% was dissolved. The acidity of vinegar which dissolved 1% shell was pH 3.0~3.17, and the acidity of vinegar which dissolved 2% shell was pH 1.11~ 1.20. The pH values of vinegar which dissolved 1%, and 2% shell contents were 4.54~4.55, and 4.86~4.95, respectively. When 1% shell was dissolved, the acidity was higher than that of commercial vinegar, with a high pH value and low level of free acid. This shows that when Chrysanthemum zawadskii 1% is added during acetic acid fermentation, the inhibition was 44.4%, and 22.2% respectively. In this regard, Chrysanthemum zawadskii should be added after the fermentation of acetic acid. The calcium content of 1% shell vinegar is 0.4%, and that of 2% vinegar is 0.78%. Non-heated native wax gourd shows an angiotensin converting enzyme inhibition rate of 21.7%, an antioxidant activity of 5.23%, and a tyrosinase inhibition rate of 5.5%. In the case of heated-extracted wax gourd, the angiotensin converting enzyme inhibition rate was 16.1%, superoxide dismutase activity was 20.5%, antioxidant activity was 23.2%, and the tyrosinase inhibition rate was 7.1%. Also, in the case of Chrysanthemum zawadskii, the angiotensin converting enzyme inhibition rate was 28.8%, the xanthine oxidase inhibition rate was 28.2%, the superoxide dismutase activity was 14.5%, the antioxidant activity was 3.2%, and the tyrosinase inhibition rate was 9.2% Data also revealed that when a 10% sample of the heated-wax gourd extract was added to A549 human lung cancer epithelial cells of, the number of cancer cells declined by 80% in 72 hours, When a 10% native extract was added, the number of cells declined by, 74% in 48 hours, and when a heated-extract of Chrysanthemum zawadskii was added, 100% of the cells died after 72 hours.

Optimization for Ammonia Decomposition over Ruthenium Alumina Catalyst Coated on Metallic Monolith Using Response Surface Methodology (반응표면분석법을 이용한 루테늄 알루미나 메탈모노리스 코팅촉매의 암모니아 분해 최적화)

  • Choi, Jae Hyung;Lee, Sung-Chan;Lee, Junhyeok;Kim, Gyeong-Min;Lim, Dong-Ha
    • Clean Technology
    • /
    • v.28 no.3
    • /
    • pp.218-226
    • /
    • 2022
  • As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO2) emissions are being focused on. Among them, ammonia (NH3) is an economical hydrogen carrier that can easily produce hydrogen (H2). In this study, Ru/Al2O3 catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al2O3 catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R2) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.

A Study on the Evolution of 3,4-DCA and TCAB in Some Selected Soils(Part II) -Degradation of $^{14}C-3,4-DCA\;and\;^{14}C-TCAB$- (수종토양중(數種土壤中)에서 3,4-DCA 및 TCAB의 변화(變化)에 관(關)한 연구(硏究)(제2보(劑二報)) -$^{14}C-3,4-DCA$$^{14}C-TCAB$ 의 분해(分解)-)

  • Lee, Jae-Koo;Fournier, J.C.
    • Applied Biological Chemistry
    • /
    • v.21 no.2
    • /
    • pp.71-80
    • /
    • 1978
  • In an attempt to elucidate the fate of 3,4-DCA and TCAB in various French soils, uniformly $^{14}C-ring-labeled$ 3,4-DCA and TCAB mere utilized and the following results obtained. 1) The rate of breakdown of $^{14}C-3,4-DCA$ into $^{14}CO_2$ was relatively higher in the early stage than that in the later stage. In 6 months of incubation in alkaline soil (pH 7.9), the rate was as high as 6.5% at dose 1 (1.5 ppm) and as low as 1.92% at dose 2(94 ppm), whereas in organic acid soil (pH 5.5) the rate was 4.91% at dose 1 and 4.24% at dose 2, respectively, without making any great difference between the two levels. 2) At dose 1, 47.70% of the initial radioactivity of $^{14}C-3,4-DCA$ was bound to soil in organic acid soil and 29.49% bound in alkaline soil, whereas at dose 2, 38.40% in organic acid soil and 20.30% in alkaline soil, respectively. 3) The amount of formation of $^{14}C-TCAB$ from $^{14}C-3,4-DCA$ seems to depend largely on the concentration of 3,4-DCA applied rather than on soil types. At dose 2, the amount was 50% of the total radioactivity extracted in organic acid soil and 30% in alkaline soil, corresponding to 1.8% and 1.4% of the initial radioactivity applied to soil, respectively. Cis-TCAB also seemed to be formed at dose 2 in both soils. Meanwhile, at dose 1, even though $^{14}C-TCAB$ was detected in trace on tlc and glc in both soils, the amount does not exceed 2 to 3% of the radioactivity extracted, corresponding to 0.05 to 0.1% of the initial radioactivity. 4) The rate of breakdown of $^{14}C-TCAB$ into $^{14}CO_2$ ranged from 0.05 to 0.20% in all the four soils. Most of the applied $^{14}C-TCAB$ remained intact after 3 months, not producing any detectable metabolites. 5) The fact that much more $^{14}C-TCAB$ was adsorbed to alkaline soil than to the other soils strongly indicates that in alkaline condition trans-isomer was converted tocisisomer which has the higher adsorption affinity than the former.

  • PDF

Catalytic Combustion of Methane over $AMnAl_{11}O_{19}$(A=La, Sr, Ba) and $CeO_2/LaAMnAl_{11}O_{19}$ ($AMnAl_{11}O_{19}$(A=La, Sr, Ba) 및 $CeO_2/LaAMnAl_{11}O_{19}$를 이용한 메탄의 촉매 연소)

  • Kim, Seongmin;Lee, Joon Yeob;Cho, In-Ho;Lee, Dae-Won;Lee, Kwan-Young
    • Korean Chemical Engineering Research
    • /
    • v.49 no.5
    • /
    • pp.633-638
    • /
    • 2011
  • Mn substituted La, Sr or Ba-hexaaluminate were prepared by $(NH_4)_2CO_3$ co-precipitate method and calcined at $1,200^{\circ}C$ for 5 h. Catalysts were characterized by X-ray diffraction and $N_2$ physisorption and scanning electron microscope (SEM). Compared to $SrMnAl_{11}O_{19}$ and $BaMnAl_{11}O_{19}$, $LaMnAl_{11}O_{19}$ in which La located at mirror plane showed better crystallinity and high surface area, 13 $m^2/g$. $LaMnAl_{11}O_{19}$ revealed well developed plate-like structure which is characteristic structure of hexaaluminate. The catalytic activity of methane combustion increased in the following order: $LaMnAl_{11}O_{19}$ > $SrMnAl_{11}O_{19}$ > $BaMnAl_{11}O_{19}$ and was dependent on surface area of catalysts. 60 wt% $CeO_2/LaMnAl_{11}O_{19}$ calcined at $700^{\circ}C$ showed enhanced methane activity and methane was oxidized completely at low temperature ($700^{\circ}C$). It was confirmed that addition of ceria seems to be effective for the low and middle temperature combustion of methane. But, after calcination at high temperature of $1,200^{\circ}C$, it lost the promoting effect of ceria due to increase of ceria particle size and it had a limit to applying to the high temperature catalytic combustion.

Method Validation for Determination of Lignan Content in Fermented Sesame by Bioconversion (생물전환된 참깨 발효물의 Lignan 화합물의 분석법 검증)

  • Jung, Tae-Dong;Kim, Jae-Min;Choi, Sun-Il;Choi, Seung-Hyun;Cho, Bong-Yeon;Lee, Jin-Ha;Lee, Sang Jong;Park, Seon Ju;Heo, In Young;Lee, Ok-Hwan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.5
    • /
    • pp.646-652
    • /
    • 2017
  • The aim of this study was to investigate method validation for determination of sesamol, sesamin, and sesamolin in non-fermented sesame and fermented sesame by bioconversion. For validation, the specificity, linearity, precision, accuracy, limits of detection (LOD), and quantification (LOQ) of sesamol, sesamin, and sesamolin were measured by HPLC. Linearity tests showed that the coefficients of calibration correlation ($R^2$) for sesamol, sesamin, and sesamolin were 0.9999. Recovery rates of lignan contents in non-fermented and fermented sesame were high in the ranges of 100.27~115.10% and 98.43~114.90%, respectively. The inter-day and intra-day precisions of sesamin and sesamolin analyses for non-fermented and fermented sesame were 0.27~1.94% and 0.25~0.69%, respectively. The LOD and LOQ were $0.23{\sim}0.34{\mu}g/g$ and $0.70{\sim}1.03{\mu}g/g$, respectively. These results indicate that the validated method is appropriate for the determination of sesamol, sesamin, and sesamolin.

Dynamic Forecasting of Market Growth according to Portable Internet Carrier Licensing Policy (휴대인터넷 사업자 선정 정책에 따른 동태적 시장 예측과 함의)

  • 김종태;박상현;오명륜;김상욱
    • Proceedings of the Korean System Dynamics Society
    • /
    • 2004.08a
    • /
    • pp.87-107
    • /
    • 2004
  • 우리나라에 이동통신이 처음 소개된 이래로 눈부신 발전을 거듭하여 왔으며, 급기야. 무선통신 서비스를 중심으로 새로운 성장력과 패러다임 전환의 가능성에 대한 전망을 논할 수 있는 수준이 되었다. 이러한 추세에 맞추어 휴대인터넷 시장에 대한 연구가 활발히 진행되고 있으며 국민경제적 효과변화나 시장 경쟁환경의 변화에 가장 영향을 미칠 수 있는 요인들 중, 사업자 수를 어떻게 선정할 것인가에 대해 다양한 접근이 시도되고 있다. 기존의 연구들은 휴대인터넷 시장을 분석하는데 있어 시장규모가 일방향으로 사업자 수에 영향을 미친다는 측면에서 이루어지고 있으며, 대부분 휴대인터넷 시장을 단일시장으로 범위를 한정하고 성장중인 시장을 정적으로 가정하여 시장성장 추이 분석 등에 주안점을 두는 단편적 연구가 수행되어져 왔다. 휴대인터넷 시장의 단편적 분석이 아닌 '모바일인터넷' , '초고속유선인터넷', '무선인터넷', '휴대인터넷' 등 네 가지 영역을 동시에 고려함으로써 영역간 복잡성과 동적인 관계 속에서 시장이 성장해 나아간다는 가정을 바탕으로, 시장에 내재되어 있는 관련요소간 상호영향과 신규정책 및 제도적 변화 수용에 있어 발생하는 시간적 공간적 지연 등을 고려한 동태적 분석을 수행하였다. 연구를 수행하기 위해 다양한 변수간의 인과관계, 피드백 구조와 시간흐름에 따른 시스템의 변화를 파악하는데 매우 유용한 도구인 시스템다이내믹스 기법을 활용하여 휴대 인터넷 시장의 동적인 구조를 알아보고 사업자 선정정책의 시행을 앞두고 있는 현재시점에서 의미있는 시사점을 제공하였다.시하고자 한다.채취하여 임신진단키트(제네디아프로테 트, 녹십자)를 이용하여 임신여부를 1차적으로 확인하였다. 과배란을 유기한 13두의 공란우중 9두(69.2%)가 과배란 반응을 나타내었으며, 회수된 수정란 51개중 이식가능수정란은 38개(74.5%) 였다. 발정동기화를 유도한 수란우 40두중에서 35두(87.5%)가 발정이 동기화되었으며, 그 중 황체검사를 통하여 30두의 수란우에 수정란을 이식하였다. 수정란이식후 13일(발정주기 21일)에 혈액을 이용한 임신진단에서 농가별 수태율은 각각 37.5%, 70.0%, 60.0% 및 71.4% 로서 평균 60.0%를 나타내었다.서 39$^{\circ}C$, 5% $CO_2$ 배양기에 48시간 배양하면서 생존여부를 판단하였다. 실험 2에서 확장배반포배 수정란이 25.3%의 생존율을 나타내었으며, 실험 1과 실험 3에서는 수정란의 형태와 관계없이 생존성을 확인할 수 없었다. 이상의 결과로 보아 glycerol 완만동결에서는 확장배반포기 수정란 이상이 보존가능한 것으로 추정되나 더 추가적인 연구가 요구된다.c kinase 활성의 변동은 정소 내 간충조직, 세정관 상피의 증식 및 기능적 분화 과정을 매개하는 생리적 활성분자 수용체 하위의 신호전달 과정에 Src-Csk loop에 의한 조절가능성을 확인할 수 있었다.rugrene의 향기성분이 주요 성분군으로 확인되었다. 2. 생강나무에서 생강의 향기를 발산하는 성분으로는 $\beta$-myrcene, o-terpinolene, phellandrone, ι-limonene, $\b

  • PDF

Development of Temperature Controlled Impulse Sealer for Preventing Cumulative Heat and Improving Sealing Quality (누적열 방지 및 비닐 접착품질 향상을 위한 온도 제어형 임펄스 씰러 (Impulse Sealer)의 개발)

  • Kim, Insoo;Kim, Sung Min;Seo, Jongchul
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.25 no.3
    • /
    • pp.117-123
    • /
    • 2019
  • The general Impulse Sealer has a problem of sealing quality because continuously sealing process results in an undesirable temperature rise, which may accumulate the heat during the operation. In order to address such a drawback, the controlled sealing temperature method can be effectively utilized compared with the general controlled time method. As such, a temperature sensor with capability of detecting the sealing temperature was installed, and a separate PCB was manufactured to control the sealing temperature by measuring and calculating the detected temperature. The temperature changes during the temperature rise and maximum temperature after continuously operation were investigated using an Impulse Sealer system. Next, the results obtained from experiment were compared with each other. As such, the maximum temperature was 70.3℃, whereas 8.9℃ was recorded as control temperature. It implies that this controlled temperature system prevented the undesirable temperature rise, thereby causing a consistent sealing quality.

Detection of Aflatoxin $M_1$ in Human and Porcine Urine and Its Risk Assessment (인축의 뇨 중 aflatoxin $M_1$의 오염분석 및 위해성 평가)

  • Kim, Hyun-Jung;Kwak, Bo-Yeon;Shon, Dong-Hwa
    • Korean Journal of Food Science and Technology
    • /
    • v.41 no.2
    • /
    • pp.215-219
    • /
    • 2009
  • To conduct a risk assessment of $AFB_1$ intake, $AFM_1$, which is a metabolite of $AFB_1$ in the human and porcine urine, was determined by competitive direct ELISA (cdELISA). The detection limit of cdELISA using anti-$AFM_1$ antibody and $AFB_1$-HRP conjugate was 10 pg/mL. The recoveries of $AFM_1$ were 117-167% after the addition of $AFM_1$ in the human urine in a range of 3-100 pg/mL. 165 samples (95.5%) of those obtained from 172 persons evidenced measurable levels of urinary $AFM_1$. The detected $AFM_1$ ranges were 0-11.6 pg/mL and the average level of $AFM_1$ contamination was 2.74${\pm}$ 1.89 pg/mL. The estimated amount of $AFM_1$ excretion in the human urine was 3.97 ng/day and the estimated $AFB_1$ intake amount was 79.4 ng/day. The probable daily intake (PDI) of $AFB_1$ by the subjects was estimated to be 1.28 ng/kg bw/day, which was higher than the tolerable daily intake (TDI, 0.15 ng/kg bw/day). In the case of porcine urine, the $AFM_1$ ranged between 0.97-26.7 pg/mL and the average contaminated $AFM_1$ was 10.62${\pm}$4.39 pg/mL. The estimated amount of $AFM_1$ excretion in the porcine urine was 27.6 ng/day, and the estimated $AFB_1$ intake amount was 551 ng/day.