• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1999

Congestion and traffic accidents occur on the merge and diverge sections in the interchange of the freeway. Studies have been conducted to reduce the traffic delay and accidents on the merge section in the freeway since 1960s. but a study was not conducted to estimate the speed variation on the merge section construct models estimated for the speed variation and suggest the appropriate measures. The purpose of this study was to identify the traffic flow characteristics on the merge section in the freeway construct the models estimated for the speed variation on the merge section in the freeway and finally establish the appropriate measure for reduction of traffic delay and accidents on the merge section in the freeway. The following results were obtained: I) Speed variations in the urban freeway appeared to be about 3.2mph, 6.5mph and 7.4mph based on the morning peak period, afternoon peak period and 24-hours period but those in the suburban freeway appeared to be about 8.0mph, 11.1mph and 10.1mph based on the same periods respectively. So different speed reduction signs need be installed to reduce delay and accidents on the merge section in the freeway based on the areas and periods as the freeway traffic management system(FTMS). ii) These models estimated for speed variation need to be studied with the changeable message sign(CMS) technique based on the real-time data so that the traffic flow could be maximized and the traffic delay and accidents be on the merge section in the freeway as more efficient freeway traffic management system(FTMS) in the near future.

• 한국정보교육학회:학술대회논문집
• /
• 2010.08a
• /
• pp.59-66
• /
• 2010

Opensource LMS Moodle consists of module of various forms and can mount learning materials of various forms. We can mount the number of contents on the Web in Moodle. In doing so, We can configure effective courses for teaching-learning activity. Moodle can reflect course design of a wide variety of teacher using a variety of learning resources and learning activities. The results of operating during 1 semester, all faculty or students were satisfied with course using Moodle. Class in the classroom is interactive systems of teacher and students, but class has one-way system in reality. E-learning can be used to complement this phenomenon. Moodle gives a free and powerful features in designing e-learning courses. In this reserch we made up course applying typical teaching-learning of design and model the process of Glaser. We analyed teaching - learning activity case of Understanding and Application of Information science course of 2010year 1 semester in Seoul national University of Education using LMS Moodle and pursued future expansion plan of Moodle.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.77-95
• /
• 2003

Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. However, speed has not been taken into account in foot kinematics and kinetics during walking. This study examined the effect of walking speed on foot joint motion and peak plantar pressure during the walking phase. Eighty healthy subjects (40 men, 40 women) were recruited. Maximal dorsiflexion and excursion were measured at the first metatarsophalangeal joints during walking phase at three different cadences (80, 100, and 120 step/min) using a three dimensional motion analysis system (CMS70P). At the same time, peak plantar pressure was investigated using pressure distribution platforms (MatScan system) under the hallux heads of the first, second, and third metatarsal bones and heel. Maximal dorsiflexion and excursion and excursion at the ankle joint decreased significantly with increasing walking speed. Peak plantar pressure increased significantly under the heads of the first of the first, second, and third metatarsal bones, and heel with increasing walking speed: three was no change under the hallux. There were no significant changes in maximal dorsiflexion or excursion at the first metatarsophalangeal joint. The results show that walking speed should be considered when comparing gait parameters. The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.672-678
• /
• 2009

Acoustic Emission (AE) technique is a non-destructive testing method and widely used for the early detection of faults in rotating machines in these days, because the sensitivity of AE transducers is higher than normal accelerometers. So it can detect low energy vibration signals. The faults in the rotating machines are generally occurred at bearings and gearboxes which are the principal parts of the machines. It was studied to detect the bearing faults by envelop analysis in several decade years. And the researches showed that AE had a possibility of the application in condition monitoring system(CMS) using the envelope analysis for the rolling bearing. And peak ratio (PR) was developed for expression of the bearing condition in condition monitoring system using AE. Noise level is needed to reduce to take exact PR value because the PR is calculated from total root mean square (RMS) and the harmonics peak levels of the defect frequencies of the bearing. Therefore, in this paper, the discrete wavelet transform (DWT) was added in the envelope analysis to reduce the noise level in the AE signals. And then, the PR was calculated and compared with general envelope analysis result and the result of envelope analysis added the DWT. In the experiment result about inner fault of bearing, defect frequency was difficult to find about only envelop analysis. But it's easy to find defect frequency after wavelet transform. Therefore, Envelop analysis added wavelet transform was useful method for early detection of default in signal process.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.301-314
• /
• 2008

The purpose of this study is to examine the effect of information service quality on user satisfaction and individual performance in Outbound Callcenter. A survey was conducted and data were collected from 330 respondents of 1 company which adopted CMS. Validity and reliability of the research instrument were tested and research hypotheses were examined using PLS Graph 3.0. As a result of data analysis, 6 out of 8 hypotheses were supported. User satisfaction is significantly influenced by information quality factors such as accuracy, currency, and relevancy. 2) Also, User satisfaction is significantly affected by internal service quality factors such as training support and reward system. 3) Individual performance is significantly influenced by user satisfaction. Implications of these findings are discussed for researchers and practitioners.

• Spatial Information Research
• /
• v.1 no.1
• /
• pp.17-28
• /
• 1993

In order to minimize vectorizing tasks, which require huge reso¬urces and time and to support the census mapping effectively, the geographic information databases structure has been studied. The steps of the new approach are as follows. : Step 1, Scanning the maps of the whole country and storing the image data in raster format. Step 2, Vectorizing the data of specific items for Census operation such as Enume¬ration District, and then linking to attribute data in the text format. Step 3, Designing the database with a Tile and Multi-layer structure to make a continuous map logically. Step 4, Implement Censlls Mapping System(CMS) for efficient mapping and retrieving. As a consequence of this study, the cost, manpower and time effectiveness was proved and it was confirmed to produce lIseful and high-qual ified maps for the Census. In the future, this system wi II be able to provide many organizations and individuals with the various data based on geographical statistical information.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.221-232
• /
• 2009

To purpose of the study was to analyze faculty utility of Web-Based course support system in Universities. Data were collected from log file in server computer, 5,023 faculties and 12,733 courses offered at spring semester of 2009 in the Metropolitan area S, K, D universities were analyzed. Specifically, frequency and percentile of faculties and courses using course management system were analyzed. In addition, the frequencies and percentiles of courses using sub-functions of course management system were analyzed and X2 test used to examine the difference of frequencies of faculties and courses using course system at using announcement, providing instructional material, public bulletin board and free board. Results were as follows. The 62.28% of faculties and 50.3% of courses have used Web-Based course support system. The results of Subfunction utility analysis showed the highest use as 80.4%. in providing instructional material. However, the use of announcement functions and online discussion was more or less low. Results imply that most of faculties and course are using course management system as supplementary system of off-line instruction.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2004

Introduction : The phantom that includes high density materials such as steel was custom-made to fix lung and bone in order to evaluation inhomogeneity correction at the time of conducting radiation therapy to treat lung cancer. Using this, values resulting from the inhomogeneous correction algorithm are compared on the 2 and 3 dimensional radiation therapy planning systems. Moreover, change in dose calculation was evaluated according to inhomogeneous by comparing with the actual measurement. Materials and Methods : As for the image acquisition, inhomogeneous correction phantom(Pig's vertebra, steel(8.21g/cm3), cork(0.23 g/cm3)) that was custom-made and the CT(Volume zoom, Siemens, Germany) were used. As for the radiation therapy planning system, Marks Plan(2D) and XiO(CMS, USA, 3D) were used. To compare with the measurement value, linear accelerator(CL/1800, Varian, USA) and ion chamber were used. Image, obtained from the CT was used to obtain point dose and dose distribution from the region of interest (ROI) while on the radiation therapy planning device. After measurement was conducted under the same conditions, value on the treatment planning device and measured value were subjected to comparison and analysis. And difference between the resulting for the evaluation on the use (or non-use) of inhomogeneity correction algorithm, and diverse inhomogeneity correction algorithm that is included in the radiation therapy planning device was compared as well. Results : As result of comparing the results of measurement value on the region of interest within the inhomogeneity correction phantom and the value that resulted from the homogeneous and inhomogeneous correction, gained from the therapy planning device, margin of error of the measurement value and inhomogeneous correction value at the location 1 of the lung showed $0.8\%$ on 2D and $0.5\%$ on 3D. Margin of error of the measurement value and inhomogeneous correction value at the location 1 of the steel showed $12\%$ on 2D and $5\%$ on 3D, however, it is possible to see that the value that is not correction and the margin of error of the measurement value stand at $16\%$ and $14\%$, respectively. Moreover, values of the 3D showed lower margin of error compared to 2D. Conclusion : Revision according to the density of tissue must be executed during radiation therapy planning. To ensure a more accurate planning, use of 3D planning system is recommended more so than the 2D Planning system to ensure a more accurate revision on the therapy plan. Moreover, 3D Planning system needs to select and use the most accurate and appropriate inhomogeneous correction algorithm through actual measurement. In addition, comparison and analysis through TLD or film dosimetry are needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.