• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.383-390
• /
• 2014

This paper presents an excitatory CMOS neuron oscillator circuit design, which can synchronize two neuron-bursting patterns. The excitatory CMOS neuron oscillator is composed of CMOS neurons and CMOS excitatory synapses. And the neurons and synapses are connected into a close loop. The CMOS neuron is based on the Hindmarsh-Rose (HR) neuron model and excitatory synapse is based on the chemical synapse model. In order to fabricate using a 0.18 um CMOS standard process technology with 1.8V compatible transistors, both time and amplitude scaling of HR neuron model is adopted. This full-chip integration minimizes the power consumption and circuit size, which is ideal for motion control unit of the proposed bio-mimetic micro-robot. The experimental results demonstrate that the proposed excitatory CMOS neuron oscillator performs the expected waveforms with scaled time and amplitude. The active silicon area of the fabricated chip is $1.1mm^2$ including I/O pads.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.103-106
• /
• 2005

This paper reports design and fabrication of CMOS temperature sensor circuit using MOSIS 0.25um CMOS technology. The proposed circuit has a temperature coefficient of $13mV/^{\circ}C$ for a wide operating temperature range with a good linearity. This circuit may be applicable to the design of one-chip IC where quartz crystal resonator is directly mounted on CMOS oscillator chips.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.275-281
• /
• 2003

A new neural oscillator has been designed and fabricated in an 0.5 ${\mu}{\textrm}{m}$ double poly CMOS technology. The proposed neural oscillator consists of a nonlinear variable resistor with negative resistance as well as simple transconductors and capacitors. The variable negative resistor which is used as a input stage of the oscillator consists of a positive feedback transconductors and a bump circuit with Gaussian-like I-V curve. The proposed neural oscillator has designed in integrated circuit with SPICE simulations. Simulations of a network of 4 oscillators which are connected with excitatory and inhibitory synapses demonstrate cooperative computation. Measurements of the fabricated oscillator chip with a $\pm$ 2.5 V power supply is shown and compared with the simulated results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.42-50
• /
• 2003

This paper presents an embedded RC oscillator which has temperature compensation circuits. The conventional RC oscillator has frequency deviation about 15%, which is caused by variation of resistors and the reference voltage of schmitt trigger from the temperature condition. In this paper, the proposed circuit use a CMOS bandgap reference having balanced current temperature coefficients as a triggering voltage of schmitt trigger. The constant current sources consist of current mirror circuit with the positive and negative temperature coefficient. The proposed circuit shows less 3% frequency deviation for variation of temperature, supply voltage and process parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2081-2086
• /
• 2015

The temperature sensor using ring oscillator is designed by 0.18㎛ CMOS process and the supply voltage is 1.5volts. The temperature sensor is designed by using temperature-independent and temperature-dependent ring oscillators and the output frequency of temperature-independent ring oscillator is constant with temperature and the output frequency of temperature-dependent ring oscillator decreases with increasing temperature. To convert the temperature to a digital value the output signal of temperature-independent ring oscillator is used for the clock signal and the output signal of temperature-dependent ring oscillator is used for the enable signal of counter. From HSPICE simulation results, the temperature error is less than form -0.7℃ to 1.0℃ when the operating temperature is varied from -20℃ to 70℃.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.682-684
• /
• 2004

The effect of 1/f noise by the random telegraph signal(RTS) on the phase noise and the jitter of CMOS ring Oscillator is investigated. 10 parallel piece-wise-linear current sources connected to each node model the RTS signals. The In, the power spectral density and the jitter of output of the ring oscillator are simulated as functions of the amplitude and time constant of RTS current source. It is confirmed that the increase of amplitude of RTS is directly related to the increase of the width of phase noise md the value of jitter. The shorter the time constant is, the wider width of FET peak and the larger value of cycle to cycle jitter are.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.399-403
• /
• 2006

An accurate constant output voltage provided by the analog memory cell may be used by the low power oscillator to generate an accurate low frequency output signal. This accurate low frequency output signal may be used to maintain long-term timing accuracy in host devices during sleep modes of operation when an external crystal is not available to provide a clock signal. Further, incorporation of the analog memory cell in the low power oscillator is fully implementable in a 0.35um Samsung standard CMOS process. Therefore, the analog memory cell incorporated into the low power oscillator avoids the previous problems in a oscillator by providing a temperature-stable, low power consumption, size-efficient method for generating an accurate reference clock signal that can be used to support long sleep mode operation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.39-44
• /
• 2013

In this paper, a Relaxation Oscillator with temperature compensation using BGR and ADC is presented. The current to determine the frequency of Relaxation Oscillator can be controlled. By adjusting the current according to the temperature using the code that is output from the ADC and BGR, was to compensate the output frequency of the temperature. It is fabricated in a 0.35 ${\mu}m$ CMOS process with an active area of $240{\mu}m{\times}210{\mu}m$. Current consumption is 600 ${\mu}A$ from a 5 V and the rate of change of the output frequency with temperature shows about ${\pm}1%$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.591-600
• /
• 2010

In this paper, three kinds of 24 GHz low-power CMOS cross-coupled voltage controlled oscillators are designed and fabricated for a short-range radar applications using TSMC 0.13 ${\mu}m$ CMOS process. The basic CMOS crosscoupled voltage controlled oscillator is designed for oscillating around a center frequency of 24.1 GHz and subthreshold oscillators are developed for low power operation from it. A double resonant circuit is newly applied to the subthreshold oscillator to improve the problem that parasitic capacitance of large transistors in a subthreshold oscillator can push the oscillation frequency toward lower frequencies. The fabricated chips show the phase noise of -101~-103.5 dBc/Hz at 1 MHz offset, the output power of -11.85~-15.33 dBm and the frequency tuning range of 475~852 MHz. In terms of power consumption, the basic oscillator consumes 5.6 mW, while the subthreshold oscillator does 3.3 mW. The subthreshold oscillator with the double resonant circuit shows relatively lower power consumption and improved phase noise performance while maintaining a comparable frequency tuning range. The subthreshold oscillator with double resonances has FOM of -185.2 dBc based on 1 mW DC power reference, which is an about 3 dB improved result compared with the basic oscillator.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.2
• /
• pp.11-25
• /
• 2023

With the increasing advancement of VLSI technology, health care system is also developing to serve the humanity with better care. Therefore, biomedical implantable devices are one of the amazing important invention of scientist to collect data from the body cell for the diagnosis of diseases without any pain. This Biomedical implantable transceiver circuit has several important issues. Oscillator is one of them. For the design flexibility and complete transistor-based architecture ring oscillator is favorite to the oscillator circuit designer. This paper represents the design and analysis of the a 9-stage CMOS ring oscillator using cadence virtuoso tool in 180nm technology. It is also designed to generate the carrier signal of 403.5MHz frequency. Ring oscillator comprises of odd number of stages with a feedback circuit forming a closed loop. This circuit was designed with 9-stages of delay inverter and simulated for various parameters such as delay, phase noise or jitter and power consumption. The average power consumption for this oscillator is 9.32㎼ and average phase noise is only -86 dBc/Hz with the source voltage of 0.8827V.