• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.850-853
• /
• 1987

A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.417-417
• /
• 2006

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.534-537
• /
• 1998

In this paper, a set of novel self-timed latches are introduced and analyzed. These latches have no back-to-back connection as in conventional self-timed latch, and both inverting and noninerting outputs are evaluated simultaneously leading to thigher oepating frequencies. Power consumption of these latches ar ealso comparable to or less than that of conventional circuits. Novel type of cross-coupled inverter used in the proosed circuits implements static operatin without signal fighting with the main driver during signal transition. Proposed latches ar tested using a 0.6.mu.m triple-poly triple-metal n-well CMOS technology. The resutls indicates that proposed active-low sefl-timed latch (ALSTL) improves speed by 14-34% over conventional NAND SR latch, while in active-high self-timed latch (AHSTL) the improvements are 15-35% with less power as compared with corresponding NORA SR latch. These novel latches have been successfully implemented in a high-speed synchronous DRAM (SDRAM).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1027-1030
• /
• 2003

In this paper, we designed GF(2$^{m}$ ) inversion and division processor for Elliptic Curve Cryptographic system. The processor that has 191 by m value designed using Modified Euclid Algorithm. The processor is designed using 0.35 ${\mu}{\textrm}{m}$ CMOS technology and consists of about 14,000 gates and consumes 370 mW. From timing simulation results, it is verified that the processor can operate under 367 Mhz clock frequency due to 2.72 ns critical path delay. Therefore, the designed processor can be applied to Elliptic Curve Cryptographic system.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.59-66
• /
• 1997

Neural networks has widely been be used for several practical applications such as speech, image processing, and pattern recognition. Thus, a approach to the voltage-controlled current source in areas of neural networks, the key features of CNN in locally connected only to its netighbors. Because the architecture of the interconnection elements between cells in very simple and space invariant, CNNs are suitable for VLSI implementation. In this paper, processing element of digital programmable CNN with variable template memory was implemented using CMOS circuit. CNN PE circuit was designe dto control gain for obtaining the optimal solutions in the CNN output. Performance of operation for 4*4 CNN circuit applied for fixed template and variable template analyzed with the result of simulation using HSPICE tool. As a result of simulations, the proposed variable template method verified to improve performance of operation in comparison with the fixed template method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.152-155
• /
• 2000

Oversampling modulators based on high-order sigma-delta modulation provide an effective means of achieving high-resolution A/D conversion in a VLSI technology. Because high-order noise shaping great]y reduces the quantization noise in the signal band. This paper introduces a third-order cascaded sigma-delta modulator that is stable for large input level. Modulator was simulated 3.3V single power supply voltage in 0.65$\mu\textrm{m}$ CMOS technology. It achieves 80㏈ SNR for a 20㎑ input signal bandwidth. A lock frequency is 3㎒ that is 80 oversampling ratio.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.375-378
• /
• 2001

A 640Gb/s very advanced ATM switching system using 0.25um CMOS VLSI, 40 layer ceramic MCM and 10Gb/s, 8 wavelength 8$\times$8 optical WDM interconnection has been fabricated. To break though the interconnection bottleneck, optical WDM interconnection is used. It has 20Gb/s 8 wavelength 8$\times$8 interconnection capability. It realizes 640Gb/s interconnections within a very small size. Preliminary tests show that 800b1s ATM switch MCM and optical WDM interconnection technologies can be applied to future high speed broadband networks

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.102-106
• /
• 2003

This paper describes novel low-power high-speed flip-flop called dual edge-triggered NAND keeper flip-flop (DETNKFF). The flip-flop achieves substantial power reduction by incorporating dual edge-triggered operation and by eliminating redundant transitions. It also minimizes the data-to-output latency by reducing the height of transistor stack on the critical path. Moreover, DETNKFF allows negative setup time to provide useful attribute of soft clock edge by incorporating the pulse-triggered operation. The proposed flip-flop was designed using a $0.35{\;}\mutextrm{m}$ CMOS technology. The simulation results indicate that, for the typical input switching activity of 0.3, DETNKFF reduces power consumption by as much as 21 %. Latency is also improved by about 6 % as compared to the conventional flip-flop. The improvement of power-delay product is also as much as 25 %.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.716-720
• /
• 2010

This paper proposes an effective fingerprint identification system with hardware block for thinning stage processing of a verification algorithm based on minutiae with 39% occupation of 32-bit RISC microprocessor cycle. Each step of a fingerprint algorithm is analyzed based on FPGA and ARMulator. This paper designs an effective hardware scheme for thinning stage processing using the Verilog-HDL in $160{\times}192$ pixel array. The ZS algorithm is applied for a thinning stage. The logic is also synthesized in $0.35{\mu}m$ 4-metal CMOS process. The layout is performed based on an auto placement-routing and post-simulation is performed in logic level. The result is compared with a conventional one.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.1-6
• /
• 1997

This paper describes the design of a network interface controller (NIC) chip which is to be used to support a novel adaptive virtual cut-through routing method for parallel compute systems with direct (i.e., point-to-point) interconnection networks. The NIC chip is designed to provide the interface between a processing node constructed from commercially available microprocessors and another custom-designed router chip, which in turn performs the actual routing of packets to their respective destinations. The NIC, designed using a semi-full-custom VLSi design technique outperform traditional wormhole routing with a minimal amount of hardware overhead. The NIC design has been fully simulated and laid out using a 0.8$\mu\textrm{m}$ CMOS process.