• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.264-273
• /
• 1992

Availability of white clover (Trifolium repens L.) has been limited due to its poor introduction to swards and lack of persistence under improper grazing management. This experiment was conducted to determine the effects of initial defoliation stage and defoliation interval on the growth of white clover varieties. Individual plants of Regal (large leaf), Louisiana S.1 (medium-large leaf), Grasslands Huia (medium-small leaf) and S184 (small leaf) were grown in containers (4.5 $\times$ 13.5 cm) containing a 1:2:1 soil:sand:Promix until reaching to the stage of 1, 4, or 8 trifoliolates, and then clipped to remove all fully expanded leaves every 7 or 28 days (d). For analysis of morphological parameters, plants were sampled on the final harvest date (0 d), and 7, 14, 21, and 28 d after the final harvest date. Harvested dry weight (dw) of all varieties declined as defoliation interval declined or initial defoliation was made earlier. That of Regal was the highest as initial defoliation was delayed. On the 7 d regrowth shoot and root dw were increased as initial defoliation was delayed or interval lengthened, whereas on the 28 d regrowth the trend was alleviated. Root dw and biomass of Regal were higher than the other varieties during the whole regrowing period, when the increase of biomass resulted from that of shoot dw. Leaf areas and petiole lengths of all varieties declined under 7 d defoliation interval. The area and the length declined with earlier initial defoliation on the 7 d regrowth but not on the 28 d regrowth. Stolon length and growing tips of S184 were the highest and increased more steeply during regrowth, while those of Regal were the lowest and did slightly. It is concluded that the continuous defoliation and the first defoliation at earlier growth stage have detrimental effects on growth of white clover, although larger leaf types are more productive but less persistent in a sward than smaller leaf types.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2575-2583
• /
• 1998

The productionof the highly relible softwae systems and theirs performance evaluation hae become important interests in the software industry. The software evaluation has been mainly carried out in ternns of both reliability and performance of software system. Software reliability is the probability that no software error occurs for a fixed time interval during software testing phase. These theoretical software reliability models are sometimes unsuitable for the practical testing phase in which a software error at a certain testing stage occurs by causes of the imperfect debugging, abnornal software correction, and so on. Such a certatin software testing stage needs to be considered as an outlying stage. And we can assume that the software reliability does not improve by means of muisance factor in this outlying testing stage. In this paper, we discuss Bavesian software reliability growth modeling and estimation procedure in the presence of an imidentitied outlying software testing stage by the modification of Jehnski Moranda. Also we derive the Bayes estimaters of the software reliability panmeters by the assumption of prior information under the squared error los function. In addition, we evaluate the proposed software reliability growth model with an unidentified outlying stage in an exchangeable model according to the values of nuisance paramether using the accuracy, bias, trend, noise metries as the quantilative evaluation criteria through the compater simulation.

• Journal of the Korean earth science society
• /
• v.26 no.1
• /
• pp.93-105
• /
• 2005

Climatological characteristics in the variation of soil temperatures in Korea were investigated using Korea Meterological Administration's observation data. And the impacts of soil moisture on the variation of soil temperature were examined using observed precipitation data. The climatological averages of soil temperatures are ranged from 14.4 to $15.0^{\circ}C$ regardless of depths. And they showed an latitudinal gradient with a warm temperature at the southern region and 'U' shape as in the air temperature with a high value along the coastal region. The relatively higher heat capacity and low conductivity of soil compared to those of the air resulted in the significant delay of the maximum and minimum date with depth. As a results, soil acts as a heat source during winter while a heat sink during summer. Global warming and urban heat island have increased the soil temperatures with an average rate $0.3\~0.5^{\circ}C/10-year$ as in the air temperature during last 30 years $(1973\~2002)$. However, the warming rate is maximized during spring contrary to the winter in the air temperature. The temporal variation of soil temperatures is strongly affected by that of soil moisture through an modification of the heat capacity and heat convection. In general, the increased soil moisture clearly decreased the temporal variations and increased the deep layer soil temperatures during cold season.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.250-257
• /
• 2015

Multi-leaf collimator (MLC) systems are frequently used to deliver photon-based radiation, and allow conformal shaping of treatment beams. Many proton beam centers currently make use of aperture and snout systems, which involve use of a snout to shape and focus the proton beam, a brass aperture to modify field shape, and an acrylic compensator to modulate depth. However, it needs a lot of time and cost of preparing treatment, therefore, we developed the manual MLC for solving this problem. This study was carried out with the intent of designing an MLC system as an alternative to an aperture block system. Radio-activation and dose due to primary proton beam leakage and the presence of secondary neutrons were taken into account during these iterations. Analytical calculations were used to study the effects of leaf material on activation. We have fabricated tray model for adoption with a wobbling snout ($30{\times}40cm^2$) system which used uniform scanning beam. We designed the manual MLC and tray and can reduce the cost and time for treatment. After leakage test of new tray, we upgrade the tray with brass and made the safety tool. First, we have tested the radio-activation with usually brass and new brass for new manual MLC. It shows similar behavior and decay trend. In addition, we have measured the leakage test of a gantry with new tray and MLC tray, while we exposed the high energy with full modulation process on film dosimetry. The radiation leakage is less than 1%. From these results, we have developed the design of the tray and upgrade for safety. Through the radio-activation behavior, we figure out the proton beam leakage level of safety, where there detects the secondary particle, including neutron. After developing new design of the tray, it will be able to reduce the time and cost of proton treatment. Finally, we have applied in clinic test with original brass aperture and manual MLC and calculated the gamma index, 99.74% between them.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.119-123
• /
• 2011

To use barley as a green manure crop, this study has been conducted in Suwon, Gyeonggi-do to establish the barley green manure (BGM)-rice cropping system with emphasis on soil incorporation date and BGM density. The nitrogen (N) contents of rye and barley, grass green manure crops, were 1.4~2.4% at early growth stage and decreased rapidly to 0.6~1.0% at late growth stage. The biomass of barley was 449 kg/l0a at heading stage (HS) and increased to 421 kg/10a at 10 days after heading stage (DAH), 473 kg/10a at 20 DAH. C/N ratio of BGM was the lowest 26.3 at HS. The N contents of BGM was in the range of 0.9~1.5%, the highest at HS and gradually decreased, and the output of N were 4.3-6.3 kg/10a. The total amount of nitrogen, phosphorous and potassium of BGM showed the highest level at 10 DAH. Culm length of rice was relatively longer as the BGM application time was delayed. The application of BGM into soil increased plant height of rice by 7.2~7.7 em as compared to the plants treated with commercial fertilizer at recommended rate. but panicle length of rice showed a similar tendency in both the soil-applied of BGM and commercial fertilizer. N contents of unhulled rice was the highest at HS of BGM and followed by 10 DAH of BGM and 20 DAH of BGM. This trend could also be seen in rice straw. The yield of rice in the soil-applied of BGM was 10~15% lower than in the soil-applied of commercial fertilizer. Based on this study, application of BGM made it possible to save 30~50% of application amount of nitrogen fertilizer for following crops.