• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.10-17
• /
• 2016

Domestic CM market has continued to grow since the enactment of CM policies in 1996. In addition, future CM market is forecasted to have potential high growth. Therefore, it is necessary to apply various CM business models reflecting the owner's requirements and characteristics in order to improve in the CM industry and to strengthen the competitiveness in the overseas construction market. In this context, the purpose of this study is to suggest strategies of various CM applications based on comparison of 4 cases analyzed by 'business weight' and 'business depth' in terms of business function as well as by the types of 'CM market' and 'CM practice'. Result of this comparative analysis shows that each case presents differences in terms of type, business weight, and business depth of CM practice. However, domestic public CM services are currently being challenged to strengthen capability throughout the project life-cycle against the limitation of government's CM policies focused on the construction supervision. In order to address this problem, this study proposes the strategies of various CM applciations from several different perspectives

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.388-393
• /
• 2003

Since the Construction Management(CM) was introduced into the Korea construction industry, the efforts for acceleration of CM adaption have been continued. The fact that an owner organization has the essential key to successful application of CM delivery method is true, but there has been no study on owner's organization. An owner should decide their organization type and measure their current needs of each CM business functions for successful application of CM. After the needs of CM business functions are measured, the owner should reinforce their required business functions through strengthening their in-house capability or outsourcing. Thus, this paper defines four kinds of owner organization type and suggest the form for evaluation of owner's CM ability and analyze about needs of each type's CM ability through making up question.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.93-108
• /
• 2008

This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1195-1200
• /
• 2009

Two important concepts in VE are "function" and "cost." Cost can be expressed quantitatively. Unlike cost, the function can only be expressed qualitatively. Thus, to accurately evaluate the performance in VE analysis, it is required that the functional aspect should be considered a qualitative one. This study suggests a procedure of function oriented evaluation which can evaluate function enhancement of a VE proposal more logically and objectively. To conduct this study, problems were induced via case analysis, and solutions were found. In addition, the existing simple evaluation procedures were corrected, and a function enhancement evaluation procedure via function classification was suggested. For function classification, the use of the concepts, which were "intended function" and "additionally obtained function," was suggested. Function oriented evaluation procedure to VE proposals which is suggested in this study is expected to be a great help in treating valuable functions through VE job plan.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.45-48
• /
• 2009

The ionization of a helium atom was investigated as a function of gas pressure, with the use of a tungsten tip. The tungsten tip, to which the external voltage was applied, was used to generate a constant electron current. The ionization current of helium gas was measured as a function of gas pressure. Effective ionization occurred in the pressure range of 0.5-20 torr when the distance between the field emission tip and the collector was 1 cm. The ionization current was linearly proportional to the voltage that was applied to the tungsten tip.

• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.129-142
• /
• 2006

This research chose 135 environmental cleaners in Busan Metropolitan City as subjects. First, the reality of wearing their safety jackets was investigated. Next, visual evaluation of the reflexive function of the current safety jackets was made. Then, based on the above results and the subsequent improvement proposal, the final product, the research costume, was made. 1. Based on the investigation of the wearing reality of safety jackets and the visual evaluation results of the reflexive function, an improvement proposal was made. As cleaners are usually seen sidewise on the roads and lateral luminosity is rather low, this aspect was compensated on the part of a jacket. Also, the reflexive belt used the diagram of ${\Delta}$ to improve visual effects. 2. As the lower body held the accident frequency of 45.0%, the sides of pants had the reflexive belt to increase visibility. 3. In consideration of the mutual effects between the background cloth and general reflexive width, the same width (5cm) of the reflexive belt as that of Type A was adopted.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.3-15
• /
• 2014

Ever expanding overseas construction is one of the most important issues for Korean construction companies. Among these issues, strategies for overseas plant construction have widely been discussed, because the plant construction has features of low competitiveness and high ripple effects when compared with other construction sectors. In this sense, the purpose of this research is to evaluate the CM capability of Korean construction industry for overseas plant construction. Fourteen construction business functions and four techniques were defined first. Based on these functions and techniques, CM capability was quantified for As-Is (2013), To-Be (2018) and Gap analyses. Findings of this research reveal that 1) capability for construction is quite competent, 2) capabilities for planning, design management, contracting, and risk management are found to be relatively low, where higher value can be added. In addition, it is found that R&D needs to be extended to develop systemized management techniques. It is also required to secure specialists and original technologies at national industrial level.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2013

BIM can be utilized variously in construction management(CM) in the respect that it helps to manage comprehensively the construction information and make reliable decisions, but the adoption of BIM is insufficient in the CM area. The purpose of this study is to develop work process models and their guides in order to utilize BIM effectively in CM work at construction stage. This study defined BIM functions as 'BIM converting design', 'Model review', 'Data extraction', 'Automatic estimate', '4D simulation', 'Drawing creation', 'Engineering sector linkage analysis' through literature search, and generated CM works applicable to BIM by analyzing the CM work and process. This study developed BIM-based CM work process models by reconstructing the existing work process in connection with BIM function through an analysis on the relationship between BIM function and CM work, and reconstructing the role of each project participants. In order to improve the usefulness of the developed models, guides that described the BIM works of project participants were prepared through interviews and case studies. To validate the utilization of the models, a comparative analysis on the BIM process of precedent studies was also made and a survey was conducted on experts. This study can contribute to increasing the utilization of BIM in the CM area and can be helpful for CM companies to develop an in-house BIM guide. In the future, it will be necessary to make an assessment on the models from a business perspective through case applications and constantly update BIM-based CM work process model in consideration of the expansion of CM work due to the application of BIM.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.289-294
• /
• 2007

It has been 10 years Since December 1996 when CM method was institutionalized by Construction Industry Fundamental law. Even though construction market has been in stagnant of business activities till now, CM in Korea started to be activated by the introduction of CM method i.n public construction. In the end of 2005, the number of CM order's contract is 6.7 times , an amount of CM order's money is 9.2 times more than operation plan of CM system announced in 2001. Therefore, CM market has been dramatically growing. However, it is judged that the shortage of faith in CM project and necessity of CM method are not recognized and study on a owner who affects successful settlement of CM has not been performed. When considering those points, in introduction and practical use of CM, CM is suggested to the field which is necessary for a client through the task performance level research and analysis of a owner who act a important role to activate Construction Management. As result of studying pre-existing papers to i.nvestigate of owner's capability level, the task function of a client is classified into 10 types and a public opinion poll was performed based on the 10 types of function.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.35-50
• /
• 2007

The purpose of this study was to investigate the result of a market research on men's jacket in their age of 25 to 35, who wear fitted jackets most, and to examine the comparative analysis of pattern and the wearing evaluation between classic jacket and fitted jacket. The results are as follows; Firstly, according to the results of a market research, 32.0% of the target owned fitted jackets, and 28.7% expressed their desire to buy only fitted jackets. This means their concern and preference for fitted jacket with which they could show up young, fresh and slim look are as high as those for classic jacket. Secondly, classic jacket showed the higher value than fitted jacket in such items as chest girth, waist girth, hip girth, sleeve's hem girth, jacket length, shoulder length, side seam length, and across shoulder point length. On the other hand, fitted jacket showed the higher value than classic jacket in back armhole length, front length, collar point length and sleeve's vent length. Thirdly, classic jacket was larger than fitted jacket in 1/2 chest girth(1.0cm), 1/2 waist girth(2.0cm), 1/2 hip girth(1.0cm), back width(0.5cm), front width(0.5cm) and side width(1.0cm). However, fitted jacket was higher than classic jacket in the armhole depth(0.5). Fourthly, the results of appearance evaluation revealed that there was a significant difference in 6 items. In other words, classic jacket was evaluated more appropriate than fitted jacket in such items as back width, back length, back neck depth, chest girth, waist girth and hip girth. And the fitted jacket had a higher value than the classic jacket in shoulder angle item. Fifthly, In the functional evaluation, fitted jacket was evaluated more uncomfortable than classic jacket. And this means that fitted jacket doesn't have a proper ease amount in each part and it has a high armhole depth compared to classic jacket. Therefore, for more comfortable patternmaking of fitted jackets, it would be required a pattern design which reflect men's own shoulder lines and women designers' flexibility that will satisfy both appearance and function.