• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.11-21
• /
• 2021

Virtual reality is currently mainly used in games, but is starting to be applied as a variety of media fields, such as broadcasting and film. Virtual reality provides more fun than reality, and can provide new experiences in areas that cannot be experienced in reality due to the constraints of time, space, and environment. In particular, as the social non-contact arena has increased due to COVID-19, it is being applied to education, health, and medical industries. The contents are further expanding into design and military fields. Therefore, the purpose of this study was to observe the change in distribution of load and pressure felt by the body in the flying state while wearing a short pants harness, which are mainly used in the game and entertainment industry. In the experiment, the average pressure in the flying state was measured by attaching a pressure sensor to the back and front of a human mannequin. As a result, it was confirmed that the load concentrated on the waist in the flying state was 44 N, with a pressure of 1353 kPa. The pressure distribution was concentrated in front of the center of gravity, and was measured was at 98% by the pressure sensors, with an average pressure value of approximately 15 kPa, and a pressure value of approximately 12 kPa at the back, which was measured at 67% by the pressure sensor. The results of the load and pressure distribution measurement are presented as fundamental data to improve the wearability and comfort of harnesses in the future, and are compared to actual measured pressure values by analyzing the clothing pressure in flight through virtual wear of harnesses through the CLO 3D program.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.91-104
• /
• 2022

In this study, a cycling smart wear for measuring cycling posture and motion was developed using a three-dimensional motion analysis camera and an IMU inertial sensor. Results were compared according to parts to derive the optimal smart device attachment location, enabling correct posture measurement and cycle motion analysis to design a pattern. Conclusions were as follows: 1) 'S-T8' > 'S-T10' > 'S-L4' was the most significant area for each lumbar spine using a 3D motion analysis system with representative posture change (90°, 60°, 30°) to derive incisions and size specifications; 2) the part with the smallest relative angle change among significant section reference points during pattern design was applied as a reference point for attaching a cycling smart device to secure detachable safety of the device. Optimal locations for attaching the cycling device were the "S-L4" hip bone (Sacrum) and lumbar spine No. 4 (Lumbar 4^th); 3) the most suitable sensor attachment location for monitoring knee induction-abduction was the anatomical location of the rectus femoris; 4) a cycling smart wear pattern was developed without incision in the part where the sensor and electrode passed. The wearing was confirmed with 3D CLO. This study aims to provide basic research on exercise analysis smart wear, to expand the smart cycling area that could only be realized with smart devices and smart watches attached to current cycles, and to provide an opportunity to commercialize it as cycling smart wear.

• 한국의상디자인학회지
• /
• 제17권2호
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• 한국의상디자인학회지
• /
• 제18권4호
• /
• pp.159-170
• /
• 2016

This study is aimed to research the trend of studies on the evaluation of clothing fit using the domestic research journals. clothing fit has long been regarded as the most important element to customers in clothing appearance. Understanding fit from a consumer's perspective is complex. 85 articles were collected from domestic academic sites (KISS, DBpia, KiSTi). Many clothing fit articles published on the 2011-2016 year. In research target, young women were more than other age groups. On the evaluation of clothing fit, method of clothing fit classified survey using the questionnaire and wearing test. Many articles were used the survey using the questionnaire, 57.7%. The other articles were used wearing test with professional analyst and objective evaluation tool. Objective evaluation was used 3D virtual wearing systems (i-designer, DC suit, CLO et al). In the survey using the questionnaire and wearing test using the objective evaluation, jacket and pants were researched on the clothing items mainly. Many young women put on the jacket and pants to active energetically. In the future, researches related clothing fit need to develop the objective and accuracy evaluation tool of clothing fit.

• 한국의류산업학회지
• /
• 제24권2호
• /
• pp.241-248
• /
• 2022

This study aims to provide basic data to suggest guidelines for re-education and work improvement of modelists based on the analysis of the current status of modelist work and education. A survey was conducted from January 4 to May 15, 2020, targeting 44 people working in pattern, pattern CAD, and grading in domestic apparel companies. Descriptive statistical analysis and frequency analysis using SPSS 25 were employed to analyze the status of work type, work difficulties, and re-education. For pattern production, the rate of using pattern CAD for business was high. It was found that companies mainly use YUKA CAD (63.8%), and branded companies use pattern CAD (100%). It was found that 3D CAD is mostly employed by vendors (88.9%), and CLO (90%) is mainly used. Regarding difficulties in pattern making, it was found that they experienced difficulties with stretchable materials owing to the amount of shrinkage and sagging of the fabric. The work problem was the lack of requisite working hours owing to the volume of work. Regarding future re-education, 63.6% of the total respondents indicated that they required a course related to pattern correction and material. Moreover, it was found that re-education was necessary to upgrade technology and acquire new knowledge, however, information on re-education was insufficient.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.766-775
• /
• 2016

In the era of globalization and unlimited competition, Korean universities need a breakthrough in their education system according to the changing education landscape, such as lower graduation requirements to cultivate more multi-talented convergence leaders. While each student has different learning capabilities, which results in different performance and achievements in the same class, the uniform education that most universities are currently offering fails to accommodate such differences. Blended learning, synergically combining offline and online classes, enlarges learning space and enriches learning experiences through diversified tools and materials, including multimedia. Recently, universities are increasingly adopting video contents and on-offline convergence learning strategy. Thus, this study suggests a teaching method based on blended learning to more effectively teach existing pattern CAD and virtual CAD in the Apparel Pattern CAD class. To this end, this researcher developed a teaching-learning method and curriculum according to the blended learning phase and video-based contents. The curriculum consisted of 2D CAD (SuperAlpha: Plus) and 3D CAD (CLO) software learning for 15 weeks. Then, it was loaded to the Learning Management System (LMS) and operated for 15 weeks both online and offline. The performance analysis of LMS usage found that class materials, among online postings, were viewed the most. The discussion menu most accurately depicted students' participation, and students who did not participate in discussions were estimated to check postings less than participating students. A survey on the blended learning found that students prefer digital or more digitized classes, while preferring face to face for Q&As.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.701-715
• /
• 2016

This research compared 3 types of jacket pattern design methods for men's wear (age range 25-35) in textbooks. We are to develop research pattern with problem solving based on an analysis of three jacket patterns. The comparative analysis revealed that loose-silhouette slopers A and B scored high in functional evaluation and low in appearance evaluation. However, the tight-silhouette slim-line sloper C received high points in appearance evaluation, but low scores in functional evaluation. All three slopers were evaluated low in the back appearance. The design characteristics of the development jacket sloper were: front width, ($1/10chest{\times}2$)+0.8cm; side width, 1/10 chest+5.5cm; back width, ($1/10chest{\times}2$)+1.5cm; armscye depth, 1/8 chest+11cm; waist back length, 1/2 jacket length+5cm; and hip length, 1/2 (jacket length-waist length)+1cm. The proportions against jacket length were applied to waist length, hip length, and the position of chest/waist pockets. In addition, the back part with low appearance estimation was adjusted as comfortable with the back curve line. Appearance evaluation and 3D clothes modeling system (CLO) showed an overall improvement in the developed jacket sloper when compared to the original jacket slopers.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.113-127
• /
• 2021

This study aims to analyze the style of men's suits and extract expressional words for the development of semantic differential scales of visual images according to the change in silhouette. Research methods are literature studies, case studies, and questionnaires. The stimuli were created using CLO 3D, a virtual sewing CAD. This study's results are as follows: 1) The British suit jacket has an angled shoulder line using thin pads, and a slightly higher waistline. The pants of the suit have a high waistline and two pleats, so the thighs of the pants are wide. The American suit jacket has a natural shoulder line, and the waistline is not emphasized. The width of the jacket is relaxed, and the length is long. The pants of the suit have a higher waistline, and the pants are wide as well. The Italian suit jacket has wide shoulders, and the waistline is connected lower with a soft curve, and the length is relatively short. The trousers of the suit are tapered and get narrower as it goes down to the hem. 2) Because it originated in the practices of true bespoke tailoring, traditional British suits have a far more 'fitted' silhouette than the mass-produced styles that became emblematic of the American style. By the late 1950s, a sack-style suit was standard American business attire. This technique gives the sack suit its characteristically 'boxy' silhouette. The "Continental" presented a highly tailored silhouette, with padded shoulders, a slim, tight-fitting chest, and a closely tapered waist. The story was that Italian culture valued aesthetics over all else and thus sought the 'slim' suit style as much as possible. 3) The main expressional words of visual images for men's suits differ greatly depending on the silhouette of suit. The visual images are ranked in the order of 'neat', 'classic', 'educated', 'hard', 'mature', for fitted silhouettes. The words of 'masculine', 'basic', 'comfortable', 'simple', 'mature', 'conservative', 'modern', are ranked for boxy silhouettes. And the words of 'slim', 'young', 'neat', are noted for slim silhouettes.

• 복식문화연구
• /
• 제31권5호
• /
• pp.640-650
• /
• 2023

This study aimed to suggest a suitable collar pattern by visually evaluating the appearance of the amount of collar drape by the starting position of the lapel line of a double-breasted tailored jacket using a 3d virtual fitting program. It created an avatar based on the mean size of women in their 20s (the 8th Size Korea) using clo network (double fastening: 10cm, collar width: 4.5cm, collar stand: 3cm, and lapel width: 8.5cm). The starting of the lapel twist line was waistline level, the 1/2 level of bustline and waistline, or bustline level, and collar laying amount was 4.5, 5.5, 6.5, or 7.5cm. It was evaluated by garment construction experts using 5, 6, and 4 items on the front, sides, and back, respectively. Descriptive statistics, F-test, Duncan-test, and reliability analysis were conducted using SPSS 22. When collar laying amount was 6.5cm, it was best rated regardless of the starting point. Under waist line, when collar laying amount was 6.5cm, it was best rated regardless of the starting point. When collar laying amount was large, the collar's outline length increased, resulting in unnecessary wrinkles from the neckline to the lapel, affecting the overall collar appearance. When collar laying amount was the smallest, the collar was lifted and the width was narrowed, exposing the seam connecting the collar and neckline. The length of the collar's outline varied depending on collar laying amount, which was important to make the outline sit comfortably on the body.

• 미생물학회지
• /
• 제36권3호
• /
• pp.181-186
• /
• 2000

Clostridium thermocellum이 생성하는 섬유소분해 효소복합체인 cellulosome은 26개 의 서로 다른 단백질로 구성되어 있으며 그 구성물질로서 calcium을 포함하고 있다. 견고한 구조의 이 복합체에서 구성단백질을 분리하여 그 기능을 연구할 목적으로 이 복합체를 해체 (dissociation)하려 시도하였다. 이 복합체는 calcium을 제거하였을 대 해체되었다. 해체된 구성 단백질들은 MonoQ column chromatogrphy에 의해 구조단백질인 CipA를 포함한 분획, 91 kDa(CelK-tr), 60 kDa 과 57 kDa 단백질로 구성된 분획과 주로 46 kDa(CelA-tr), 또는 71 kDa(CelS-tr) 단백질을 포함하는 분획들로 크게 분리되었다. 대부분의 분획들은 crystalline cellulose 분해 활성을 보였다. 순수 분리된 71 kDa 단백질은 $60^{\circ}C$~$70^{\circ}C$에서 섬 유소 분해시 calcium에 의존적이었으나 46 kDa 단백질은 그렇지 않았다. 46 kDa 단백질은 cellodextrin을 celloviose 및 cellotriose 단위로 절단하며 cellotetraose 로부터 glucose가 생 성되는 것이 관찰되었다. Cellulosome의 섬유소분해 최성 산물이 cellobiose인 것을 고려할 때 개개 구성단백질의 활성이 이 효소 복합체내에서 조절되어 있음을 알 수 있다.