• The Korean Journal of Physiology
• /
• v.26 no.2
• /
• pp.137-141
• /
• 1992

The present study was aimed at elucidating the mode of inhibitory action of tricyclic antidepressants on the smooth muscle. Effects of amitriptyline on the isolated detrusor muscle strips of the urinary bladder of the rabbit were examined. The spontaneous rhythmic movement of the muscle preparation was frequently observed, which was decreased or abolished by addition of amitriptyline $(10^{-5}{\sim}10^{-3}\;M)$. The muscle preparation responded with contraction dose dependently to carbachol, of which dose response curve shifted to the right in the presence of either amitriptyline or atropine. However, amitriptyline produced a nonparallel shift, whereas atropine caused a parallel one. In calcium free medium, the contraction response to carbachol was markedly decreased, which was resumed by the addition of $CaCl_2$ (2.5mM), but not in the presence of either amitriptyline or nifedipine. KCI (60 mM) produced a potent contraction, which was abolished in the presence of amitriptyline or nifedipine. These results suggest that amitriptyline, unlike atropine, not only acts as a noncompetitive antagonist at cholinergic muscarine receptors but also inhibits Ca-influx through the muscle cell membrane.

• Journal of Biosystems Engineering
• /
• v.27 no.3
• /
• pp.249-258
• /
• 2002

The fourteen different electrodes coated with polymeric lipid membrane were evaluated to selectively monitor the sweet, salty, sour and bitter tastes, and umami. The polymeric lipid membrane consisted of the three components, or polymer matrix, plasticizer and electroactive material, the compositional ratio of which was 1:1.25:1. Herein, the 14 different electroactive materials were used. Sucrose, NaCl, citric acid, caffeine and MSG were used as standard materials of sweet, salty, sour and bitter tastes, and umami. The linear responses of each electrode regarding 5 tastes were analyzed by means of the correlation coefficient between electric potential difference and concentration of a taste material when the linearity was based on a linear model and a thermodynamic model, respectively. As fur salty taste, the electrode coated with valinomycin had a selective linearity at the significance level of 0.01. For monitoring sweet taste, the electrode with oleylamine and the electrode with the mixture of tai-n-octylmethylammonium chloride and dioctylphosphate (2:8) showed the significant linearities at the levels of 0.05 and 0.10, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.10
• /
• pp.1064-1068
• /
• 2011

The osmotolerant yeast, Candida magnoliae, which was isolated from honeycomb, produces erythritol from sugars such as fructose, glucose, and sucrose. Erythrose reductase in C. magnoliae (CmER) reduces erythrose to erythritol with concomitant oxidation of NAD(P)H. Sequence analysis of the 5'-flanking region of the CmER gene indicated that one putative stress response element (STRE, 5'-AGGGG-3'), found in Saccharomyces cerevisiae, exists 72 nucleotides upstream of the translation initiation codon. An enzyme activity assay and semiquantitative reverse transcription polymerase chain reaction revealed that the expression of CmER is upregulated under osmotic and salt stress conditions caused by a high concentration of sugar, KCl, and NaCl. However, CmER was not affected by osmotic and oxidative stress induced by sorbitol and $H_2O_2$, respectively. The basal transcript level of CmER in the presence of sucrose was higher than that in cells treated with fructose and glucose, indicating that the response of CmER to sugar stress is different from that of GRE3 in S. cerevisiae, which expresses aldose reductase in a sugarindependent manner. It was concluded that regulation of CmER differs from that of other aldose reductases in S. cerevisiae.

• Korean Journal of Plant Resources
• /
• v.23 no.6
• /
• pp.535-540
• /
• 2010

Phenylalanine ammonia-lyase (PAL), a key enzyme of the phenylpropanoid biosynthesis pathway, is activated by a number of developmental and environmental cues. The coding region of the NtPAL4 gene was 2,154 bp in length, and its deduced protein was composed of 717 amino acids. Sequence analysis of NtPAL4 cDNA from tobacco (Nicotiana tabacum L.) revealed high structural similarity to PAL genes of other plant species. The NtPAL4 gene exists as a single copy in the tobacco plant, and its transcripts were strongly expressed in flowers and leaves. NtPAL4 expression was significantly induced in response to NaCl, mannitol, and cold treatments, but it was not induced by abscisic acid (ABA). NtPAL4 expression decreased gradually after treatment with ABA and $H_2O_2$; however, NtPAL4 transcripts accumulated after treatment with methyl viologen (MV). Our results suggest that the NtPAL4 gene may function in response to abiotic stresses.

• KSBB Journal
• /
• v.29 no.3
• /
• pp.188-192
• /
• 2014

Calcite forming bacteria (CFB) have been received increasing attention as a novel and environmental friendly strategy for the healing of concrete crack. Among the CFB, spore forming bacteria were proposed to overcome concrete condition (high pH, hydration heat, deicer). In this study, Lysinibaclillus sphaericus WJ-8 (WJ-8) isolated from concrete pavement was characterized. The WJ-8 was able to precipitate calcite at 10 mg/mL. When observed by scanning electron microscopy, WJ-8 showed spore formation and maximum spore yield was approximately 97.9%. Also response of spores against various environment stresses was examined. Approximately 83~97% of spores maintained their survivability at each three conditions ($60^{\circ}C$, 3 M NaCl and pH 12).

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.268-273
• /
• 2000

Plasma models are crucial to equipment design and process optimization. A radial basis function network(RBFN) in con-junction with statistical experimental design has been used to model a process plasma. A 2$^4$ full factorial experiment was employed to characterized a hemispherical inductively coupled plasma(HICP) in characterizing HICP, the factors that were varied in the design include source power, pressure, position of shuck holder, and Cl$_2$ flow rate. Using a Langmuir probe, plasma attributes were collected, which include typical electron density, electron temperature. and plasma potential as well as their spatial uniformity. Root mean-squared prediction errors of RBEN are 0.409(10(sup)12/㎤), 0.277(eV), and 0.699(V), for electron density, electron temperature, and Plasma potential, respectively. For spatial uniformity data, they are 2.623(10(sup)12/㎤), 5.704(eV) and 3.481(V), for electron density, electron temperature, and plasma potential, respectively. Comparisons with generalized regression neural network(GRNN) revealed an improved prediction accuracy of RBFN as well as a comparable performance between GRNN and statistical response surface model. Both RBEN and GRNN, however, experienced difficulties in generalizing training data with smaller standard deviation.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.13-20
• /
• 1991

Ion-selective electrode responsive to the thiocynate ion prepared by using the quaternary ammonium salts as a active material and PVC as a membrane matrix. The effect of chemical structure and composition of active material, and the membrane thickness on the linear response. the detection limit, and Nernstian slope of the electrode studied. Under the above optimum conditions of membrane, the effect of pH and the selectivity coefficients to various interfering anions were compared and investigated. It was concluded that the functions of thiocynate ion-selective electrode(ISE) were closely related to the chemical structure of the quaternary ammonium salts. The linear response, and the detection limit of the electrode potential increased with the increase of the carbon chain length of the alkyl group in the quaternary ammonium salts in the ascending order of Aliquat 336T, TOAT, TDAT, and TDDAT. The optimum membrane thickness was 0.3mm. The electrode characteristics was better with the decrease of the concentration of active material, and the best concentration was 3 weight percent. The membrane potential was independent of the pH variation in the region from pH 2 to 12. The order of the selectivity coefficients is as follows：Cl $O_4$$^{[-10]}$ ＞ $I^{[-10]}$ ＞N $O_3$$^{[-10]}$ ＞B $r^{[-10]}$ ＞ $F^{[-10]}$ ＞C $l^{[-10]}$ ＞O $A_{c}$ $^{[-10]}$ 〓S $O_4$$^{2-}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.4
• /
• pp.255-265
• /
• 2008

This paper presents the optimization process of evaporator for a vapor compression cooling system for high heat flux CPU. The CPU thermal capacity was given by 300W. Evaporating temperature and mass flow rate were $18^{\circ}C$ and 0.00182kg/s respectively. R134a was used as a working fluid. Channel width(CW) and height(CH) were selected as design factors. And thermal resistance, surface temperature of CPU, degree of superheat, and pressure drop were taken as objective responses. Fractional factorial DOE was used in screening phase and RSM(Response Surface Method) was used in optimization phase. As a result, CW of 2.5mm, CH of 2.5mm, and CL of 484mm were taken as an optimum geometry. Surface temperature of CPU and thermal resistance were $33^{\circ}C\;and\;0.0502^{\circ}C/W$ respectively. Thermal resistance of evaporator designed in this study was significantly lower than that of other cooling systems such as water cooling system and thermosyphon system. It was found that the evaporator considered in this work can be a excellent candidate for a high heat flux CPU cooling system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.6
• /
• pp.799-804
• /
• 1999

Particle collection characteristics of the MOUDI cascade impactor has been studied for coarse particles in the range of 2 to 20$mu extrm{m}$ in aerodynamic diameter. A vibrating orifice aerosol generator was empolyed to generate monodisperse test aerosols. The oleic acid and sodium chloride(NaCl) particles were used as test aerosols. Aluminum foil and Teflon filter were selected as impaction media. The sampling flow rate was changed from 25 to 35L/min. Particle collection efficiency for single stage was examined for liquid particles. The stage response was obtained experimentally for the cascade impactor composed of three stages and a backup filter. The results showed that most of particle collection efficiencies measured in this work are similar to the efficiency curves obtained by Marple et al.(1991). For particles less than cut-off size of the stage, the collection efficiencies of solid particles are similar to those of loquid particles. However, the collection efficiency of solid particles decreases with mereasing particle diameter for the particles greater than the actual cut-off size of the impactor. The particle collection efficiency increases with increasing sampling flow rate at the same particel size. However, the collection efficiency curves seem not to be greatly shifted with the flow rate. The stage responses obtained by direct measurements in this work are in good agreement with those derived from the collection efficiency curves for single stage.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.319-324
• /
• 2005

The present study was designed to study the difference effects between nicardipine and its two enantiomers on thoracic artery of rabbit. A high-performance liquid chromatographic method was used to prepare the two enantiomers of nicardipine. The thoracic artery of rabbit was removed. The vessels were cut into 3 mm in width and 15 mm in length spiral strips and immersed into tissue baths. The concentration-response curves of nicardipine and its enantiomers were obtained by cumulative administration of the vasoconstrictors. Nicardipine and the enantiomers could shift the dose-response curves of NE, KCI or CaCl$_2$ to right in a nonparallel manner and decrease the maximum effective in a concentration-depended manner, respectively. The pD$_2$' value of R-(-)-nicardipine showed significantly effective than that of nicardipine and S-(+)-nicardipine (P<0.01). There was not obviouse difference between the pD$_2$' value of nicardipine and S-(+)-nicardipine (P>0.05). The results demonstrate that the stereoselective interaction between R-(-)-nicardipine and L-calcium channel receptor is more stronger than that of S-(+)-nicardipine.