• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.693-698
• /
• 1997

Drought resistance and salt resistance of seedlings were compared with the polyethylene glycol(P.E.G) and NaCl solutions of the same osmotic potential($\Psi_\pi$=-10 bar). Plant height, seedling dry weight, chlorophyll content and leaf water potential decreased while the free proline content increased more in the P.E.G. than in the NaCl solution. Free amino acids increased 2.6 times in the P.E.G. solution and 3.6 times in the NaCl solution more than in the untreated(Hoagland's solution). Free proline occupied 66% and 61% of the content of total amino acids under water stress and salt stress, respectively. Besides free proline, phenylalanine in the P.E.G. solution and phenylalanine, alanine and asparagine in the NaCl solution increased distinctly. In short, it was shown that water and salt stress responses in seedling stage were relatively similar.

• Korean Journal of Animal Reproduction
• /
• v.11 no.3
• /
• pp.223-229
• /
• 1987

This study was carried out to investigate effects of superovulation and time of embryo recovery on ovarian response, recovery rate and developmental stage of embryo in donor and effects of methods of synchronization, number of corpus luteum (CL), stage of embryo and time of embryo transfer on ovarian response, conception rate and number of newborn in recipients which were transferred on 2.5, 3.5 and 4.5 days after synchronization. The results obtained are as follows; 1. The ovulation point of superovulated donor on 2.5, 3.5 and 4.5 days after copulation was 23.3, 35.3 and 23.3, respectively. The number of embryos recovered from the donors on 2.5, 3.5 and 4.5 days after copulation was 23.3, 25.8 and 19.8, respectively. The ovulation point and number of embryos recovered on 3.5 days were greater than those of 2.5 and 4.5 days. Among 232 embryos recovered on 3.5 days after copulation, 84 were blastocyst and 62 were hatching blastocyst. 2. The number of CL in recipients on 2.5, 3.5 and 4.5 days after synchronization was 3.2, 2.9 and 3.8 and showed no difference among the days. 3. When the number of CL was 0, 2-3, 4-6 and more than 7 the pregnancy raet of recipients was 0, 37.5, 66.7 and 75%, respectively. The pregnancy rate of recipients increased as the number of CL increased. 4. The pregnancy rate of transferred morula, blastocyst and hatching blastocyst was 32.0, 37.2 and 24.7%, respectively. The blastocyst nhowed highest pregnancy rate. 5. When the recipients were synchronized by HCG, the number of CL, unruptured follicle, hemorrhage, pregnancy rate and number of young were 5.5, 6.4, 3.3, 72.7% and 3.3, whereas that of GnRH were 2.3, 4.4, 2.8, 25.0% and 1.2, respectively. Recipients synchronized by HCG showed better results than GnRH. 6. When the embryos were collected on 2.5 days after copulation and transferred to the synchromized recipients, the pregnancy rate and the number of young born was 62.58% and 3.1, respectively. Those of 3.5 and 4.5 days after copulation was 57.1% and 1.3, and 37.5% and 1.6. The 2.5 days showed higher pregnancy rate and number of young born than 3.5 and 4.5 days.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.86-92
• /
• 2012

A characteristic study of chlorine dioxide generation by the electrolysis system was performed after chlorite ($ClO_2^-$) is adsorbed from sodium chlorite by a polymer ion exchange resin. A strongly basic anion exchange resin was used and a Ti plate coated with Ru and Ir was used as an electrode. Various parameters such as reaction stirring velocity, reaction temperature, chlorine dioxide product concentration, ion exchange resin content and product maker type for the adsorption quantity in the chlorite adsorption of ion exchange resin were investigated and found the ion exchange resin with the maximum adsorption quantity. A generation trend of chlorine dioxide was observed by the electrolysis system and optimum conditions on the desired value were found using response surface design of DOE (Design of Experiments). The strongly basic anion exchange resin with the maximum adsorption quantity was SAR-20 (TRILITE Gel type II) and the adsorption quantity was around 110 mg/IER (g). Observed generation optimum conditions of chlorine dioxide were constant-current (electrode area base; $A/dm^2$) and flow rate of $N_2$ gas (4.7 L/min) at the desired value of sterilization (900~1000 ppm, 1 h).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.665-671
• /
• 1996

The salt stress at seedling stage of barley was examined in different concentrations of NaCl containing 1/2 Hoagland solution. Among the physiological factors electric conductivity and sodium content of cell sap outflow solution were increased according to the in-crease of NaCl concentration in 1/2 Hoagland solution but the total protein content of root cell sap outflow solution was decreased. Changing pattern of amino acids content in plant was divided into 3 groups which were increased, decreased or unchanged by NaCl concentration in solution. In normal condition, sugar content in plant was higher than potassium or sodium but if NaCl was added more than 25mM in 1/2 Hoagland solution, sodium was the highest. Potassium content in shoot was decreased as 67% of control at 100mM of NaCl containing solution and in root it was decreased as 8%. Sum of the potassium and sodium content in shoot was seriously increased in accordant with NaCl concentration in culture solution, but in root it was gradually decreased. Chlorophyll content per g fresh weight and photosynthetic ability per $\textrm{cm}^2$ in first leaf were not affected by NaCl concentration of 1/2 Hoagland solution but root activity was slightly decreased compared to control.

• The Journal of Dong Guk Oriental Medicine
• /
• v.8 no.2
• /
• pp.83-96
• /
• 2000

Objective This experimental study was designed to investigate effects of Sam-chool-gun-bi-tang administration during carbohydrate loading diet to long distance runners on changes of the urine metabolic responses. Materials and Methods All subjects were divided randomly with two groups, Sam-chool-gun- bi-tang administration Group (N=5) and control group (N=5) and attended on domestic marathon race. The urine samples were collected by 15ml conical tube at rest, a day before race, immediately after race, a day after race. These samples were used to analyze for the factors of the change on metabolic responses. At First, the factors of the routine urine test were checked; RBC, WBC, glucose, protein, ketone, bilirubin, urobilirubin. Next, the factors on the changes of the electrolyte metabolism and creatinine were checked; $Na^+ $, $Cl^-$, $K^+$, $Ca^{+ +}$, Creatinine. Results 1. Urine RBC, WBC, glucose, protein, ketone, bilirubin, urobilirubin were all denoted negatively (-). 2. Urine pH response in Sam-chool-gun-bi-tang administration group was shown significant difference between two groups at immediately after race. 3. Urine $Na^+$ response in Sam-chool-gun- bi-tang administration group was shown significant difference between two groups at immediately after race. 4. Urine $K^+$ response in Sam-chool-gun-bi-tang administration group was shown significant difference between two groups at immediately after race and a day after race. 5. Urine $Cl^-$ response in Sam-chool-gun- bi-tang administration group was increased at immediately after race, but was not shown significant difference between two groups. 6. Urine $Ca^{+ +}$ response in Sam-chool-gun-bi-tang administration group was decreased gradually, but was not shown significant difference between two groups. 7. Urine Creatinine response in Control group was decreased significantly at immediately after race, but was not shown significant difference between two groups. Conclusion According to the above results, it was shown that Sam-chool-gun- bi-tang administration had the positive effects on changes of the urine matabolic responses during carbohydrate loading diet to the long distance runners.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1607-1611
• /
• 2011

To analyze the role of Bombyx mori transferrin (BmTf) in response to microbes or oxidative stress, we investigated the level of BmTf transcripts in B. mori treated with various microbes and oxidative stress inducers. BmTf mRNA was mainly expressed in the epidermis and fat in the bodies of B. mori injected with Escherichia coli, and up regulated in response to microbes such as bacteria, fungi, or viruses, but was hardly altered in response to oxidative stress inducers such as $H_2O_2$, Cu, or $FeCl_3$. We also confirmed that BmTf mRNA expression was increased in Bm5 cells treated with ERK, PLC, PKA, PI3K, MAPK, or JNK inhibitors, respectively. To identify the major inducer of BmTf expression, we analyzed the amount of serum iron in the hemolymph of B. mori after injection or feeding with E. coli or $FeCl_3$. The results showed that the amount of serum iron was not changed by injection and feeding with E. coli, although BmTf mRNA was increased by injection with E. coli. On the contrary, injection and feeding with $FeCl_3$ significantly increased the amount of serum iron, although they did not alter the BmTf mRNA level. On the basis of these results, we assume that up-regulation of BmTf in B. mori is closely related to the defense of microorganism, and BmTf may be expressed at the basal constitutive level when it plays a role in iron metabolism by maintaining iron homeostasis and in the insect defense mechanism against oxidative stress.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.342-350
• /
• 1999

Photobacterium phosphoreum was used in order to study response to heavy metal including $HgCl_2$, $CdCl_2$, $MnSO_4$ and $ZnSO_4$ in view of developing monitoring system for toxic substances. The concentrations of heavy metal causing 50% reduction($EC_{50}$) in bioluminescence intensity were determined with both free and immobilized P. phosphoreum. The bioluminescence responses were examined at various concentrations of heavy metal after 10, 20 and 30 min of exposure. The linear correlation between Gamma values and concentrations of heavy metal was obtained and $EC_{50}$ was calculated from the linear correlation. The significant inhibitory concentrations for bioluminescence emission were found to be 0.05mg/L for $HgCl_2$, 25mg/L for $CdCl_2$, 50mg/L for $MnSO_4$ and 12.5mg/L for $ZnSO_4$, respectively. The free cell and disc type were shown to be more sensitive to heavy metal than cells mixed with Na-alginate or immobilized on Sr-alginate. However, the linear regression curves were derived from the Sr-alginate immobilized cells indicating the immobilization method is a useful tool for monitoring of heavy metal under more stable condition of bioluminescence.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.42-49
• /
• 2017

As a fundamental study for the separation of vanadium and tungsten from the leaching solution obtained from the soda roasting and water leaching process of spent SCR (Selective Catalytic Reduction) catalyst was carried out. The precipitation behaviors of vanadium and tungsten using the artificial solution (V: $1g{\cdot}L^{-1}$, W: $10g{\cdot}L^{-1}$) was investigated depending on temperature, NaOH concentration and the amount of $CaCl_2$ (aq.) added. V (aq.) was selectively precipitated at lower temperature than 293 K while tungsten also was precipitated at higher temperature. Precipitation rate of V and W was decreased by the increasing concentration of NaOH. On the other hand, excess Ca addition induced the increase of precipitation rate for V and W due to the formation of $Ca(OH)_2$ following the pH decline. The response surface methodology was employed to optimize the selective precipitation. Vanadium of 99.5% and tungsten of 0.0% was precipitated at $0.5mol{\cdot}L^{-1}$ of aqueous NaOH and 1 equivalent ratio of $CaCl_2$ at 293 K.

• Journal of Environmental Health Sciences
• /
• v.36 no.4
• /
• pp.313-322
• /
• 2010

The aim of this research was to apply experimental design methodology to optimization of conditions of electrochemical oxidation of Rhodamine B (RhB) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicative of the OH radical). The reactions of electrochemical oxidation of RhB degradation were mathematically described as a function of the parameters of current ($X_1$), NaCl dosage ($X_2$) and pH ($X_3$) and modeled by the use of the central composite design. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and RNO and test variables in a coded unit: RhB removal efficiency (%) = $94.21+7.02X_1+10.94X_2-16.06X_3+3.70X_1X_3+9.05X_2X_3-{3.46X_1}^2-{4.67X_2}^2-{7.09X_3}^2$; RNO removal efficiency (%) = $54.78+13.33X_1+14.93X_2- 16.90X_3$. The model predictions agreed well with the experimentally observed result. Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the RhB degradation using canonical analysis was 100.0%(current, 0.80 A; NaCl dosage, 2.97% and pH 6.37).

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.557-564
• /
• 2007

We prepared caviar analogs encapsulated by calcium-alginate gel membranes as a means to replace higher priced natural caviars. Processing the caviar analogs (beluga type) was optimized by response surface methodology with central composite design. Concentrations of sodium alginate ($X_1$) and $CaCl_2\;(X_2)$ were chosen as the independent variables. In order to compare characteristics of the caviar analogs with the natural caviar, sphericity ($Y_1$), diameter ($Y_2$), membrane thickness ($Y_3$), rupture strength ($Y_4$), rupturing deformation ($Y_5$), and sensory score ($Y_6$) were used as the dependent variables. The sphericity of the caviar analogs showed a similar value to that of natural caviar (over 94%) in the range of independent variables. Generally, the $CaCl_2$ concentration ($X_2$) affected all dependent variables to a greater extent than the sodium alginate concentration ($X_l$), For the multiple response optimization of the 5 dependent variables ($Y_1,\;Y_2,\;Y_4,\;Y_5$, and $Y_6$), the desirability function was defined as the following conditions: target values ($Y_1\;=\;100%,\;Y_2\;=\;3.0\;mm,\;Y_4\;=\;1,470\;g,\;Y_5\;=\;1.1\;mm,\;and\;Y_6\;=\;10\;points$). Membrane thickness ($Y_3$) was eliminated from the dependent variables for multiple response optimization because it could not be measured with an image analyzer. The values of the independent variables as evaluated by multiple response optimization were $X_1\;=\;-0.093$ (78%) and $X_2\;=\;-0.322$ (1.07%), respectively.