• 한국운동역학회지
• /
• 제13권3호
• /
• pp.199-215
• /
• 2003

The purpose of this study was to attempt new starting motion and supply present starting motion in the 500M short track speed skating according to the center of gravity position. The center of gravity position ratio was divided starting motion into five(type A : front 80%-back 20%, type B front 70%-back 30%, type C : front 50%-back 50%, type D : front 30%-back 70%, type E : front 20%-back 80%). The three dimension motion analysis with DLT(direct linear transformation) method was executed using two video cameras. The following conclusion was that It was appear that reaction and execution time in starting motion was the most short in type B. It was characteristic that step of skaters was shorten and center of gravity position ratio was not effect to change of the step in each event. It was appear that the displacement of type D and type E were longer than that type A and type B during the starting motion. It was appear that skill types of center of gravity position ratio to the front were lower than that to the back and contract a posture. Observing the above, it was conclusion that skill type B of center of gravity position ratio to the tent was more effect than that to the back. But it is important that these skill type was most used to the competition and estimate the result.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.285-299
• /
• 2004

The purpose of this study is to identify female 500m sprint start motion by the center of gravity position in short track speed skating. The center of gravity position ratio was divided into three type(type A front : 80%-back : 20%, type B front : 70%-back 30%, type C front: 50%-back : 50%). Three video cameras were used for 3D motion analysis with DLT method and the results were as follows: The elapsed time in starting motion was appeared that type B was the shortest and type A was the longest. It was appear that the stroke length of type A was longer than that type B and C during starting phase. This result was similar to displacement of center of gravity. It was appeared that skill type of center of gravity position ratio type B' ankle and knee joint angle were lower than that of type A and C. Observing these results it was conclusion that skill type B of center of gravity position ratio was more faster than that of type A and C. But it is important that these skill type needed to verifying more subjects.

• 한국항해학회지
• /
• 제10권2호
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.551-560
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the men's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, the ratio of step length to his height, average velocity at the final 6~11 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and takeoff angle of COG. Swing up phase variables included: pole flexion angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height, run up velocity and approach position increased. However, horizontal velocity during the last two steps of the final approach decreased dramatically compared to speeds from 1990. These results reflect the change in both technique and improved physical fitness in pole vaulters. During extension, the peak height of COG averaged 0.3m higher then COG height when the pole was released. These specific results can help coaches and athletes modify training and improve performance.

• 한국항해학회지
• /
• 제13권3호
• /
• pp.21-36
• /
• 1989

The submarine played an active part in military operation during the last of nineteenth century. Today, as an aid to science and technology and technology m the submarine is being utilized in the fields of deep sea investigation and sight-seeing as well as military activities. When the stability and the maneuverability of a submarine is studied, the problems arise on the vertical plane as well as the horizontal plane. However, the horizontal plane has been dealt with in the study of surface vessels. The author attempts to look into the hydrodynamic directional stability at high speeds (above 10knots) on the vertical plane, and to clarify the submarine's depth-rate as related to the factors that affect it : the distance from the center of buoyancy to the center of gravity, the speed of the submarine, and the position and the area ratio of hydroplane. In this study, the author considered the two groups of dimensionless derivatives of submarine. It is confirmed that the depth-rate of a submarine is decreased when the length, of BG is increased under the continuous submerging status. But the depth-rate is increased when the area ratio of hydroplane is enlarged. It is also confirmed that a submarine has only one critical speed in accordance with the shape of its hull, but unconcerned with its speeds.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.51-56
• /
• 2007

플라스틱은 아주 유용한 물질로서 우리 일상생활에 폭넓게 이용되고 있다. 국내에서는 약 400 만톤의 폐플라스틱이 발생되고 있지만 재활용율은 30% 이하로 대부분 소각이나 매립에 의해 처리되고 있다. 따라서 폐플라스틱을 재활용할 수 있는 재질분리 기술개발 필요한 실정이다. 본 연구에서는 폐플라스틱 종말품으로부터 PET 회수를 위한 마찰하전 정전선별이 수행되었다. 하전특성 연구결과에 의하면, PET와 PVC의 하전극성과 하전량은 HDPE와 PP의 하전물질 그리고 상대습도가 낮을수록 효과적이었다. HDPE 싸이클론 하전장치를 이용한 재질분리 실험결과, PET의 품위와 회수율은 전극전압 30 kV 이상, 분리대위치 -2cm의 조건에서 각각 96.8%와 85.0%로 얻어졌으며, 분리대의 위치(-6cm)에 따라 PET 회수율이 24% 감소하지만 품위를 98.5%까지 분리할 수 있는 기술을 개발하였다.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.

• 한국항해항만학회지
• /
• 제44권4호
• /
• pp.275-282
• /
• 2020

최근 선박의 전복사고는 무게중심의 부적절한 관리, 기상악화 또는 과도한 조타사용 등으로 인한 선체운동이 발생하면서 화물 또는 중량물이 이동하여 복원력 저하 또는 상실 등이 주된 원인으로 분석되고 있다. 따라서 전복사고를 예방하기 위해서는 위험한 횡경사가 발생하더라도 직립 상태로 되돌아오려는 복원성 확보가 이루어져야 한다. GM은 복원성을 판단하는 중요한 평가요소이며, 항해사는 GM을 복원성 검토에 좋은 척도로 활용한다. 본 연구에서는 5년간 운항 중인 선박으로부터 수집한 복원성 자료를 바탕으로 운항 상태에 따른 선종별 GM을 선박 길이, 폭, 총톤수 등 선박제원으로 분석하였다. 선박 길이에 따른 GM 분포의 특징을 확인하였고, 선박 폭과 GM의 상관분석을 수행한 후 선폭대비 GM의 비율을 산출한 후 과거의 비율과 비교하여 최근 경향을 검토하였다. 또한 선박 대형화 추세를 반영하기 위하여 총톤수(GT)/선폭(B)을 이용하여 GM을 회귀분석하여 선종별 GM 추정을 위한 간이근사식 및 최소 GM을 제안하였다. 연구의 결과는 선박에서 항해사가 안정적인 GM 확보의 검토를 위한 자료로 이용되길 기대된다.