• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.225-228
• /
• 2007

This paper presents a geostatistical methodology to model local uncertainty in spatial estimation of sediment grain size with high-resolution remote sensing imagery. Within a multi-Gaussian framework, the IKONOS imagery is used as local means both to estimate the grain size values and to model local uncertainty at unsample locations. A conditional cumulative distribution function (ccdf) at any locations is defined by mean and variance values which can be estimated by multi-Gaussian kriging with local means. Two ccdf statistics including condition variance and interquartile range are used here as measures of local uncertainty and are compared through a cross validation analysis. In addition to local uncertainty measures, the probabilities of not exceeding or exceeding any grain size value at any locations are retrieved and mapped from the local ccdf models. A case study of Baramarae beach, Korea is carried out to illustrate the potential of geostatistical uncertainty modeling.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.8-13
• /
• 2013

It is necessary to develop the next generation FTS which is suitable for our environment and effectively operates many launch vehicles. Standard tone, Secure tone, MHA, EFTS and DSSS are studied for the next generation FTS. FTS requires a high quality of performance and reliability because of their specific mission. And few FTSs are needed but the price is very expensive. Therefore we must investigate a part of the FTS whether the part can be reused for a part of the next FTS. In this paper, we use CCDF of the transmitted signal from FTS as the method to study a possibility of reusing HPA used in the present system. The simulation results show that PEP of Standard tone is 0.21dB and Secure tone and MHA has the same PEP. CPFSK's PEP is 1.81dB and PEP of DSSS using BPSK modulation is 2.6dB.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.45-51
• /
• 2021

Polar transmitter can support multi-band and multi-mode operation. The efficiency of frequency usage can be increased if polar transmitters can transmit multi-carrier signals. In this paper the configuration of polar transmitters is investigated to generate multi-carrier signals. Spectrum and CCDF Simulation results of two-carrier signals generated by the polar transmitter can be used to design of PM and AM path in a polar transmitter.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.234-239
• /
• 2012

Next generation mobile communication systems have been studied and applied to support various services. In next generation mobile communication systems, the most interested research is the integration of various communication systems and the offer of various services by using high-speed data transmission. The integration of communication systems has been researched by using multi standard modem, while the high-speed data transmission for the offer of various services has been applied by using OFDM. This paper has proposed the method to reduce PAPR by using multi standard modem. with EVM, this paper has also suggested the method to compensate in-band distortion while reducing PAPR. By using the proposed methods, this paper has analyzed and simulated the decrease efficiency of PAPR, the performance of CCDF, and the performance of BER in next generation mobile communication systems. The simulation results improved the performance of next generation mobile communication system can be seen that.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.263-268
• /
• 2002

DFDM is a good candidate for beyond-3G high-speed wireless communication application because of the robustness to the intersymbol interference and multipath fading. However. an OFDM signal has a serious problem of the high PAPR, which results in the significant nonlinear distortion when it passes through a nonlinear high power amplifier. We propose a new PAPR reduction method using pre-emphasis and clipping. Via the proposed method, the OFDM output signal can have a low PAPR and BER improvement. Then. de-emphasis process is requisite in OFDM receiver. PAPR is reduced to about 5.7 ㏈ at the CCDF= 10$\^$-3/ when the subcarrier number is 16, QPSK modulation is used. pre-emphasis change point Is 3/9 of the peak amplitude of the IFFT output and clipping level is 11 in the IFFT output amplitude. The required SNR at BER=10$\^$-3/ the proposed system is improved by 2 dB than that of the original OFDM system.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.234-240
• /
• 2011

In this paper, the performances of Cram$\acute{e}$r-Rao Lower Bound (CRLB) with Frequency Difference of Arrival (FDOA) measurements for Unmanned Aerial Vehicle (UAV) tracking are investigated. We focus on two cases: the influence on CRLB with FDOA measurements collected by time, and random distribution of Ground Stations (GSs). We derived the performance by gauging the size of CRLB through Complementary Cumulative Distribution Function (CCDF). From the simulation results, broader distribution of GSs and FDOA measurements by longer time bring about better performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5149-5173
• /
• 2016

Cooperative forwarding has shown a substantial network performance improvement compared to traditional routing in multi-hop wireless network. To further enhance the system throughput, especially in the presence of highly congested multiple cross traffic flows, a promising way is to incorporate the multi-radio multi-channel (MRMC) capability into cooperative forwarding. However, it requires to jointly address multiple issues. These include radio-channel assignment, routing metric computation, candidate relay set selection, candidate relay prioritization, data broadcasting over multi-radio multi-channel, and best relay selection using a coordination scheme. In this paper, we propose a simple and efficient cluster-based cooperative data forwarding (CCDF) which jointly addresses all these issues. We study the performance impact when the same candidate relay set is being used for multiple cross traffic flows in the network. The network simulation shows that the CCDF with MRMC not only retains the advantage of receiver diversity in cooperative forwarding but also minimizes the interference, which therefore further enhances the system throughput for the network with multiple cross traffic flows.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.105-109
• /
• 2011

Since a severe accident, which happens in low frequency, can cause serious damages, the interests in off-site consequence analysis for a nuclear power plant have been increased after Chernobyl, TMI and Fukushima accidents. Consequences, which are the effects on health and environment caused by released radioisotopes, are evaluated using MACCS II code based on the method of Level 3 PSA. To perform a consequence analysis for the reference plants, the input data of the code were generated such as meteorological data, population distribution, release fractions, and so on. Using these input data, acute and lifetime dose as an organ, CCDF for early fatalities and latent cancer fatalities, and average individual risk were analyzed by using MACCS II code in this study. These results might contribute to establishing accident management plan and quantitative health object.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.22-28
• /
• 2007

High PAPR (peak-to-average power ratio) is a major drawback of OFDM (orthogonal frequency division multiplexing) signals. In this paper, a modified SLM (selective mapping) technique that uses erasure decoding of RS (Reed-Solomon) codes is presented. At the transmitter a set of phase sequences are multiplied such that some portions of check symbols in RS-coded OFDM data blocks are phase-rotated. At the receiver, RS decoding is performed with the phase-rotated check symbols being treated as erasures. Hence, there is no need to send side information about the phase sequence selected to transmit for the lowest PAPR. In addition, the estimation process for the selected phase sequence is no longer needed at the receiver, leading to improvement in terms of complexity and performance. To evaluate the performance of this technique, the CCDF (complementary cumulative distribution function) of PAPR, the BER (bit error rate) and the decoding failure probability are compared with those of the previous SLM techniques.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.139-145
• /
• 2008

There has been lots of studies on communication systems using millimeter wave recently in many countries, specially in newly assigned 57GHz ~ 64GHz ISM band. Among those studies, IEEE 802.15.3c standard proposes OFDM (Orthogonal Frequency Division Multiplexing) systems for high data rate transmission support. But OFDM method has the PAPR (peak-to-Average Power Radio) problem The PAPR problem is to decline the performance of the transmission system due to signals distorted severely when passing through nonlinear components such as ADC/DAC and power amplifiers. In order to solve the problem of P APR, this paper suggests SSC (Sine Soft Clipping) and analyzes the PAPR, CCDF, PSD, BER by applying SAW(Surface Acoustic Wave) filter and power amplifiers to IEEE 802.15.3.c OFDM WPAN systems.