• 한국컴퓨터산업학회논문지
• /
• 제3권1호
• /
• pp.19-26
• /
• 2002

다양한 QoS를 갖는 트래픽을 위해, ATM 스위치의 출력버퍼에 저장되는 셀의 큐 구조를 제안하였다. 제안한 큐 구조는 기존의 고정길이 큐 구조의 문제점인 버스트 트래픽으로 인한 큐 넘침의 문제점을 개선하기 위해 실시간 트래픽과 비실시간 트래픽을 묶어 큐를 공유하여 큐 이용률을 최대화시키는 구조를 기반으로 하고 있다. 즉, CBR 트래픽과 VBR-nrt를 묶고, VBR-rt와 ABR 트래픽을 묶어 버스트 트래픽 유입으로 인한 셀 손실률을 최소화시킬 수 있는 특성을 제공한다. 제안 큐 구조의 성능을 평가하기 위해 버스트 특성이 강한 트래픽 패턴을 이용하여 기존의 큐 구조와 셀 손실률 및 평균 지연률을 비교하였다.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.25-33
• /
• 1997

The end-to-end rate-based control mechanism is used for the flow control of the ABR service to allow much more flexibility in ATM switching system. To accommodate the ABR service effciently many algorithms such as EFCI, EPRCA, ERICA, and CAPC2 have been proposed for the switch algorithm. ABR cells and related RM cells are received at the ATM switch fabric transparently without any processing. And then cells received from the traffic source are queued in the ABR buffer of switching system. The ABR buffer usually has some thresholds for easy congestion control signal transmission. Whatever we use, therefore, these can be many ABR traffic control algorithms to implement the ABR transfer capability. The genertion of congestion indicate signal for ABR control algorithms is determined by ABR buffer satus. And ABR buffer status is determined by ABR cells transfer ratio in ATM switch fabrics. In this paper, we presented the functional structures for control of the ABR traffic capability, proposed the readout scheduling, cell slot allocation of output link and the buffer allocation model for effective ABR traffic guranteeing with considering CBR/VBR traffics in ATM switch. Since the proposed readout scheduling scheme can provide more avaliable space to ABR buffer than existing readout scheduling scheme, generation rate of a SEND signal, that is, BCN signal in destination node can be increased for ABR call connection. Therefore, the proposed scheme, in this paper, can be appropriate as algorithm for effective ABR traffic service on output link of ATM switching node.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.91-94
• /
• 1998

ATM technology is reaching a certain level of maturity that allow for its deployment in local as well as in wide area networks. Concurrently, audiovisual applications are foreseen as one of the major users of such broadband networks. We present in this paper requriement of real-time multimedia service on B-ISDN networks and simulating the transport of MPEG-2 encoded multimedia data over ATM networks using CBR, VBR, ABR of ATM Traffic Service. We compare each delay time considering network performance and propose need for real-time multimedia service.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.32-40
• /
• 2003

In this study, we develop the Genetic Fuzzy System(GFS) to estimate the link traveling speed. Based on the genetic algorithm, we can get the fuzzy rules and membership functions that reflect more accurate correlation between traffic data and speed. From the fact that there exist missing links that lack traffic data, we added a Case Base Reasoning(CBR) to GFS to support estimating the speed of missing links. The case base stores the fuzzy rules and membership functions as its instances. As cases are accumulated, the case base comes to offer appropriate cases to missing links. Experiments show that the proposed GFS provides the more accurate estimation of link traveling speed than existing methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• 산업기술연구
• /
• 제21권A호
• /
• pp.189-198
• /
• 2001

In recent years, the predominant part in telecommunications is mobile communications. The next generation network is extending today's voice-only mobile networks to multi-service networks. ATM Network is possible to carry such multi-media traffic and it will be expect to use wireless ATM for the future mobile access network. One of manly important aspects for the performance of wireless ATM is the Medium Access Control (MAC) protocol. The MAC protocol must be able to satisfyingly handle the different ATM services (CBR, VBR, ABR and UBR) with their radically different performance requirements. Additionally, the MAC protocol must be able to cope with the complex radio environment where fading, multi-path propagation interference and burst-errors further complicate the situation. In this paper, a dynamic slot allocation algorithm in wireless ATM is proposed for an efficient channel sharing/media access at the MAC layer. We use equivalent capacity in the allocation of slots for VBR traffic which is variable along the time. It is simple and effective slot allocation method for VBR service. In particular, we consider the slot allocation of a session consisted of several connections for requirement of multimedia traffic. Simulation shows that the cell loss ratio is reduced by re-allocation of extra slots in Mobile Terminal (MT).

• 한국통신학회논문지
• /
• 제28권1B호
• /
• pp.18-26
• /
• 2003

광대역 액세스 망에서 합류, 분배 지점에서의 효율을 고려한 PON(Passive Optical Network)의 설계는 중요한 관심거리가 되고 있다. PON 구조는 매우 간단하지만, 가입자들에서 발생하는 상향 트래픽 제어를 위해서는 매체 접근 제어 프로토콜이 필요하다 본 논문에서는 여러 트래픽 글래스를 지원하는 ATM-PON을 사용하는 광대역 액세스 망을 위한 Request-Counter MAC 프로토콜을 제시한다. 제안된 매체 접근 제어 프로토콜을 위해 ITU-TG 983을 기반으로 하여 Grant Field 형식과 Minislot 형식, 그리고 대역 할당 알고리즘을 제시하였다 실험 결과 종래의 매체 접근 제어 프로토콜보다 더 나은 서비스 품질을 보장받을 수 있음을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제29권4C호
• /
• pp.461-471
• /
• 2004

최근 초고속 인터넷 접속 서비스에 대한 가입자의 욕구는 단순 인터넷 접속 서비스에서 개인화된 서비스로 변화하고 있다. 초고속 인터넷 접속 서비스 제공 사업자 또한 가입자에게 좀 더 고속의 서비스를 제공하기 위해 ADSL에서 메트로 이더넷 기반의 VDSL로 대체하고 있다. 그러나 이러한 메트로 이더넷 기반의 초고속 인터넷 접속망에 이미 설치된 장비들은 트래픽 특성에 따라 가입자를 구별할 수 없어 개인별로 차별화된 서비스를 제공하는 것은 곤란한 실정이다. 이 논문에서는 접속망이 트리 구조일 경우, 접속망 요소들이 Qos 기능을 제공하지 않아도 경계 노드의 플로우별 트래적 쉐이핑으로 특정 하향 플로우에 대하여 Qos를 제공할 수 있음을 보였다. 본 논문에서는 이를 보이기 위해 트러 구조의 접속망에서 보장형 서비스를 제공하기 위한 경제 노드의 스케줄링 알고리즘을 설계하고, 이것의 성능을 분석하였다. 이 스케줄링 알고리즘은 최대 허용 대역폭으로 각 플로우를 쉐이핑하고, 플로우의 SLA에 따라 최소 대역폭을 보장하도록 DRR을 개량하여 설계되었다. 설계된 알고리즘의 성능을 분석하기 위해 다양한 시뮬레이션을 수행하여, 경계 노드에서의 플로우별 트래픽 쉐이핑에 의해 접속망에서의 혼잡 및 손실이 줄어들고, TCP 트래픽 플로우의 성능이 크게 향상되며, CBR 보장형 서비스에 대한 손실의 큰 감소와 더불어 지연 및 지터 특성이 향상되었음을 보였다.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.132-141
• /
• 2000

본 논문에서는 트리 구조의 가입자망인 APON(ATM over Passive Optical Network)에서 멀티미디어 정보를 보다 효율적으로 제공하기 위한 매체 접근 제어 프로토콜을 제안하였다. 제안된 프로토콜은 사용자 측에서 발생한 원래의 트래픽 패턴을 손상시키지 않으면서 상향 데이터 흐름을 효과적으로 다중화할 수 있도록 하고, ATM 트래픽 클래스별 전송 품질(QoS)의 특성을 반영하였다. 이를 위하여 먼저 요구-허락형 전송 구조에서 다양한 요구 방식에 따른 성능을 분석하여, 각 트래픽 클래스에 적합한 요구 방식을 설정하고, 오버헤드를 최소화할 수 있는 전송 프레임 구조를 제안하였다. 또한 OLT의 셀 허락 분배 과정에서 ATM 클래스별로 각기 다른 우선 순위를 주어 셀 전송에 대한 허락을 스케줄링 한다. 제안한 허락 분배 알고리즘은 전송 지연과 CDV에 엄격한 성능을 요구하는 CBR/VBR 트래픽에 우선적으로 허락을 분배하고, ABR 트래픽은 최소 셀 전송률(MCR)을 보장하면서 이용 가능한 대역폭을 동적으로 사용하도록 하였으며, UBR 트래픽은 가장 낮은 우선 순위를 가지고 남은 대역을 사용하게 된다. 따라서 트래픽 속성을 변화시키지 않고 ATM 셀을 전달\ulcorner 가능하여 멀티미디어 전송에 있어 전송 품질(QoS)을 만족시킬 수 있다. 제안한 프로토콜에 대한 성능 평가를 위하여 평균 전송 지연 시간 및 CDV(Cell Delay Variation)등의 관점에서 시뮬레이션을 실시하고 성능 평가 결과를 기술하였다.