• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.629-637
• /
• 2006

It is important to design the high-speed communication system in the hostile channel. Due to the frequency diversity, FD-OFDM that can be used for the high-speed communication is more robust to the noise or interference than ordinary OFDM. However, even the FD-OFDM becomes degraded in th ε strong narrow band interference channel. In this paper, we propose an AFD-OFDM system and analyze the communication performances in order to find out the more robust communication system in the hostile channel. So, the AFD-OFDM system can cover the drawback of the FD-OFDM and improve the BER performance than FD-OFDM. From the simulation results, FD-OFDM shows better performance than the ordinary OFDM. Furthermore, AFD-OFDM shows more excellent performance than FD-OFDM in the strong narrow interference channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.311-318
• /
• 2016

Recent vehicles are using car internal network for various purposes such as vehicle control, diagnostic functions, and ECU program upgrade. Currently CAN and FlexRay are the most representative networks. In the next-generation network, the use of CAN FD and car ethernet is actively studied. In this paper, we aimed to compare and evaluate the diagnostic function and the program of the ECU from the upgrade view on characteristics related to download time for each network when CAN, CAN FD, and FlexRay network are applied. As a result of the simulation, it was possible to determine that the CAN FD network is currently the most suitable for the next-generation network by suppressing other networks in terms of cost performance even under conditions of 500 Kbps and 2 Mbps which are practically usable speeds.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.351-358
• /
• 2017

The most common communication interface for automotive electronic control devices is CAN (Controller Area Network). Sine CAN was first adopted to Daimler vehicles in 1991, all of automobile manufacturers use the CAN communication for in-vehicle networks. However, as the number of electronic control devices connected to the CAN network rapidly increases, the CAN protocol reaches the limit of technology. To overcome this limitation, Bosch introduced the new communication protocol, that is CAN-FD (Flexible Data-rate). In this paper, we analyze the characteristics and limitations of CAN-FD communication according to the topology under the in-vehicle wiring harness environment designed based on the existing classic CAN communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.105-108
• /
• 2003

In the framework of universal multimedia access, one challenge for video transmission (communication) is to deliver video content through heterogeneous network channels matching the diversity of client devices. As one of the many adaptation methods, media transcoding is commonly considered. Particularly, FD (Frame Dropping)/CD Coefficient Dropping) transcoding is used due to the low computational complexity and simple implementation. In this scheme, CD is simply implemented by truncating the high frequency AC DCT coefficient bits. But, the CD error tends to be propagated within single GOV. In this paper, we derive the distortion relationships between CD error and propagation error, and investigate the error characteristics by computer simulations. The CD error characteristics can be effectively used in the FD/CD transcoding scheme.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.794-802
• /
• 2017

In this paper, a wireless powered communication network (WPCN) consisting of a hybrid access point (H-AP) and multiple user equipment (UE), all of which operate in full-duplex (FD), is described. We first propose a transceiver structure that enables FD operation of each UE to simultaneously receive energy in the downlink (DL) and transmit information in the uplink (UL). We then provide an energy usage model in the proposed UE transceiver that accounts for the energy leakage from the transmit chain to the receive chain. It is shown that the throughput of an FD WPCN using the proposed FD UE (FD-WPCN-FD) can be maximized by optimal allocation of the UL transmission time to the UE by solving a convex optimization problem. Simulation results reveal that the use of the proposed FD UE efficiently improves the throughput of a WPCN with a practical self-interference cancellation capability at the H-AP. Compared to the WPCN with FD H-AP and half-duplex (HD) UE, FD-WPCN-FD achieved an 18% throughput gain. In addition, the throughput of FD-WPCN-FD was shown to be 25% greater than that of WPCN in which an H-AP and UE operated in HD.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.17-25
• /
• 2020

Multiple-input multiple-output systems can achieve a full sum rate (SR) via full duplex (FD). However, its performance is degraded by self-interference (SI) that occurs between the transmitter and receiver at the same node and thus is constrained by error floors. Conversely, half duplex (HD) can avoid the SI albeit at lower spectral efficiency, and the slope of its error curve is determined by the diversity order. In this study, a link selection scheme based on switching between FD and HD is examined as a simple method to improve the bit error rate (BER) performance of FD systems. In the proposed link selection algorithm, either FD or HD is selected based on the received minimum distance and signal-to-interference plus noise ratio. Simulation results indicate that the proposed hybrid FD/HD switching system offers significant BER performance improvement when compared with that of the conventional FD and FD based on only the received minimum distance under the same fixed SR. Under relatively sufficient SI cancellation, it is demonstrated to outperform the HD with a diversity advantage in low and medium signal-to-noise ratio region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1677-1685
• /
• 2004

Recently, FD (Frame Dropping)-CD (Coefficient Dropping) transcoding is considered due to the low computational complexity and simple implementation. The conventional FD-CD transcoding schemes have not considered the CD errors that tend to be propagated and accumulated. In this paper, we derive the error characteristics incurred by the CD errors and, through computer simulations, we show that the CD errors are propagated and not negligible to the decoded qualities of the next frames within single GOP. Then, we propose an exponential-decaying model that describes well the characteristics of propagation/accumulation errors. Finally, it is shown that the proposed model can be effectively used for estimating the overall distortions incurred by the CD errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.906-914
• /
• 2009

SC-FDMA is employed in the 3GPP-LTE standard as the uplink transmission scheme. SC-FDMA has advantages that the signal has a low PAPR property and a simple equalizer such as FD-LE can be implemented. But FD-LE has inferior performance to Hybrid-DFE composed of frequency-domain feedforward filter and time-domain feedback filter. Recently, several IB-DFE algorithms have been proposed to overcome the disadvantages of implementation and processing complexity of Hybrid-DFE and to obtain superior performance to FD-LE. In this paper, we apply several IB-DFE algorithms to 3GPP-LTE uplink system and compare their performance by calculating BER. We investigate the effects of channel estimation errors and Doppler shift on performance. Finally, by analyzing computational complexity of IB-DFEs, we present some criteria to choose appropriate algorithm and to decide the number of iterative processes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1374-1379
• /
• 2016

In almost all schemes of cooperative cognitive radio networks (CCRN), the users transmit and receive signals in half-duplex mode. In this paper, a design of CCRN adopting the full-duplex (FD) technique is addressed. In order to enable FD communication among users in the CCRN, simultaneous transmitting and receiving antennas are employed for the secondary users. Preliminary results from analysis and numerical evaluation indicate that the proposed FD multiple-input-multiple-output CCRN framework can provide a performance gain over the conventional CCRN frameworks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1595-1611
• /
• 1994

In this paper, the numerical wave propagation properties of the finite difference-time domain(FD-TD) method is investigated as a discrete model describing electromagnetic(EM) wave propagation phenomena. The leap-frog approximation of Maxwell's curl equations in time-space simulates EM wave propagation in terms of the numerical characteristic and the domain of dependence. A geometrical interpretation of the FD-TD numerical procedure is presented. The numerical dispersion error due to the leap-frog approximation and its dependence on the stability factor are illustrated. The FD-TD method using the leap-frog approximation is inherently a descriptive model. Thus, not only any physical picture about EM wave propagation phenomena can be drawn through this model, but also physical or engineering parameters in the frequency domain can be extracted from descriptive results. E-plane filter characteristics in the WR-28 rectangular waveguide and reflection property of an inductive iris in the WR-90 rectangluar waveguide extracted from simulation of the FD-TD model is included.