• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.169-172
• /
• 2000

In this paper, an OMM (On-the-Machine Measuring) system has been developed, which can perform measuring and inspection of sculptured surfaces of die and mold, by use of a scanning-type touch probe mounted into the spindle of a NC machine. The calibration procedures of a scanning prove (SP2-1, Renishaw) and an algorithm for measuring surface points by a ball-nosed stylus have been studied. The system has been developed based on commercial CAM software (Z-Master 2000), and tested through measuring a plastic injection molding-die. Also some experimental results of the calibration and measuring for given surface positions are analyzed to verify its accuracy and reliability.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.155-167
• /
• 1992

This paper presents an automatic setup planning system for turning operation of symmetric rotational parts. The proposed setup planning system determines workpiece holding method, number of setup, clamping surface, and workpiece holding device by using design data, part description database and part feature recognition information. The workpiece holding method is based on functional name and length/diameter ratio of the given part, and number of setup is determined by part profile type and its technological constraints. Clamping surface and workpiece holding device are determined by using information about the results of workpiece holding method and number of setup, and capacity of workpiece holding devices. A case study is performed to show the performance of the proposed system.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.16-29
• /
• 1993

The objective of this research is in the development of a flexible 3-dimensional inspection system for the sculptured surface by integrating the Coordinate Measuring Machine (CMM), CAD database, and vision system. To achieve the proposed flexible inspection system, two research categories are discussed in the study: new inspection planning method includes a new measuring point selection method and various new probe path generation methods. The object recognition and localization process for the unknown surface can be easily carried out by introducing a new concept called "Z-Layer". The experimental results indicate that the developed flexible inspection system, with the proposed algorithm, can be inplemented in real situation.situation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.942-946
• /
• 1997

In this research,we suggest a virtual machining system that can simulate sutting forces at the stage of design. Cutting forces,here, are modeled form the machanistic model of the ball end milling. To this end, we need undeformed chip thickness which is used for calculating chip load. It is derived form the z-map data of a CAD model. That is, chip load is the height difference between the cutting tool contact point and the workpiece at arbitrary position. The tool contact point is referred from the cutter location. Form the experimental verification, we can simulate machining process effectively to the slot and the side cutting of ball end mill.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.203-208
• /
• 2016

Purpose: This study introduces the production process of dog's dental prosthesis using an automated dental prosthetics technology. The occlusal interaction of dog's dental prosthesis was observed. Methods: This study was proceeded with dog's the mandibular first molar teeth. The 3D CAD designed to 3D model specimens was observed by CAD software. and The specimens designed to 3D model specimens was observed occlusal interaction by using articulator. Results: Occlusal contact point in prosthetic specimens were observed in buccal surface. and 98% of the size of the crown is the best occlusal relationship. Conclusion: Observation of occlusal relations result to 98% of the size of the crown is the best.

• Journal of Technologic Dentistry
• /
• v.40 no.1
• /
• pp.27-32
• /
• 2018

Purpose: This study was performed to investigate processability of the dental zirconia block. Most of the CAD/CAM zirconia restorations utilize the partially sintered blocks, which are sintered at a temperature lower than $1100^{\circ}C$. Methods: Partially sintered zirconia samples were prepared $40{\times}30{\times}10mm$ and surface treatment by #2000 sandpaper. Scratch hardness was determined by the procedure of ASTM G171-03 using a scratch hardness tester(KS TECH, Korea) equipped with a real time load detector to measure tangential force during scratching. The scratch rate was 30 mm/min. Results: Scratch hardness(Hs) increases steeply with increase in the loads. The highest Hs was sampl 1.42 GPa and lowest was sample 0.42 GPa. Conclusion : The machinability of partially sintered CAD/CAM zirconia blocks can be optivized by manipulation of Hs.

• Journal of Ship and Ocean Technology
• /
• v.5 no.4
• /
• pp.1-18
• /
• 2001

Software written in academic environments is rarely integrated and/or reused. Moreover, typical academic software products do not communicate with commercial CAD packages, consequently functionality that is readily available to industry is not available do academic researchers. The Surface Design Library (SDL) is a library serving as a framework under which, CAGD software, intended for research or educational use, can be written in such a manner that it becomes a reusable part of a useful CAGD system. Moreover SDL is equipped with an IGES translator so that it communicates with commercial CAD packages, This paper gives a brief overview to SDL and presents examples of using it for high quality fairing performed on a naval ship hull, before employing commercial CAD packages for further design and analysis.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.9-15
• /
• 2006

Colors of textile products or fashionable clothing play one of the most important roles. From the point of visual cues, the realism of an image is the result of a good interaction of local light scattering or transmittance model applied. A 3-dimensional CAD software was used to construct a solid plain fabric model. In order to simulate a union fabric with different warp and filling colors, rendering was performed on the fabric model. It was demonstrated that the iridescent effect, pearl effect, or superficial color change effect of the union fabric during wearer's movement could be explained using the fabric models at inclined fabric positions during viewer's observation.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.95-106
• /
• 2005

The purpose of this study was to research the design methods to express jacquard design using CAD. For this study, two design patterns were divided; in addition, each design pattern is applied to two different weaving types, single woven fabric and double well cloths. As a result, 16 samples were produced by applying 4 design methods (warp shrunk as half size design/weft shrunk as half size design - A, warp shrunk as half size design/weft original size design - B, warp original size design/weft shrunk as half size design - C, warp original size design/weft original size design - D) to the two design patterns with the two weaving types. The result of this study can be summarized as follows. 1. The most delicate design method was Method D. However, Method B which took half the time less than Method D was almost as delicate as the Method D on the surface. 2. Method B was judged as a considerably efficient method for time and cost. 3. Method D was considered as most suitable for elaborate parts and delicate lines. However, it was considered uneconomical since it took the longest time. 4. Mettled A took 2.5 times less time than Method D. Therefore, Method A was more applicable to producing high density design. 5. Method C is not considered as a useful method as it showed rough surface and took long time by applying high design zoom except intentional design.