• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.31-36
• /
• 2005

This paper describes a research work on the die design for the deep drawing & ironing(D. D. I) of high pressure gas cylinder. D. D. I die set is large-sized die used in horizontal press, which is usually composed of a drawing, and an ironing die. Design method of D. D. I die set is very different from that of conventional cold forging die set. Outer diameter of the die set is fixed because of press specification and that of the insert should be as small as possible for saving material cost. In this study, D. D. I die set has been designed to consider those characteristics, and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2002

This paper describes a research work on the development of computer-aided design system far the deep drawing & ironing of high pressure gas cylinder. An approach to the design system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, handbook, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD Rl4.0 using personal computer. This system is composed of three modules which are input. process design and drawing.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.466-472
• /
• 1988

본 연구에서는 직선 및 원과 원호가 포함된 설계도면 뿐만 아니라 단순한 수 식으로 표현할 수 없는 곡면 즉 선직선(ruled surface)을 포함한 기계 부품용 설계 도 면의 입체 도형으로의 자동 변환과, 자동 변환된 입체 도형으로부터 임의의 위치에 대 한 단면을 도출하여 CAM의 기본 요소인 NC 공작기계의 공구 경로를 발생시키는 과정의 알고리즘을 개발하고 이것을 컴퓨터 프로그램화하여 산업계에 필수적인 CAD/CAM 통합 을 위한 기초 이론을 확립하고자 한다.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.180-189
• /
• 1993

In CAD/CAM system, it is required to produce manufacturing information from the deawing output of design system. The most difficult task is to formulate 3-dimentional modeling information utilizing 2-dimentional data. This paper addresses the automatic converting steps of 2-dimentional drawing data to 3-dimentional solid modeling using feature recognition rules as an expert shell. With the standardization of design process and recognition rule as a fundamental steps, the developed system shows a good application tool which can interface the design and manufacturing stage in CAD/CAM system of PC level.

• 한국CDE학회논문집
• /
• 제9권4호
• /
• pp.373-381
• /
• 2004

Using standard components of a press die is recognized as a way for a cost reduction and a short lead time. It also provides a way for a quick maintenance of a die under repair. It is expected to contribute to integration of CAD/CAM system for manufacturing dies in the future. This paper presents a 3D CAD library which is constructed using the standard components and is used for designing a press die. This 3D CAD library is generated by a database system made of Microsoft Access for standard components and by CATIA V5 R10 API for geometric features. The library is implemented using Visual Basic 6.0 utility of CATIA API function in the Windows NT environment. It creates a 3D model of the standard components of press die easily when a die designer inputs numerical values of geometric features and the BOM of the completely assembled parts. It also generates automatically the assembly drawing of die set by using variables for standard values of die parts. Therefore users can save the cost of time to design the press die components, and even a beginner can use this program with ease. The test results of the 3D CAD library for designing shearing and bending dies verify its usefulness and feasibility.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.194-202
• /
• 2002

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D lay-out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2000

The accumulated know-how and trial-and-error procedures are known as the best ways to determine blank shape and dimensions. One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of products is calculated by mathematical or 3-D modeling methods. A blank design system is constructed for elliptical deep drawing products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. This system consists of input geometry recognition module, 3-D modeling module and blank design module, respectively. Blank dimension of three types is determined by the same area, which was acquired in 3-D modeling module. The suitability of this system is verified by applying to a real deep drawing product.

• 연구논문집
• /
• 통권23호
• /
• pp.155-164
• /
• 1993

A drawing technique which use only fine curves and dashed lines is widely adopted in banknotes and post stamps printing. Engraving of the curves and lines are traditionally performed by hand skill which provides low productivity in printing. As an effort for higher productivity and quality, a drawing automation method which can easily produce NC codes and drawings for a mechanical or chemical engraving is proposed. An initial work shows that it is possible to draw a portrait by contolling the width and length of predetermined fine lines according to the gray scale at the end points of each line. User interface functions of a commercial CAD system are heavily employed to exploit the presented method.

• 한국전자거래학회지
• /
• 제8권1호
• /
• pp.121-139
• /
• 2003

Currently, it is not popular to use the STEP based product information in the construction drawing files, in spite of the importance and possibility of using various product data in drawing files on the CALS/EC environment. This paper aims to demonstrate a construction drawing information management system based on ISO 10303/STEP. To achieve this aim, the authors have analyzed the current construction drawing information classification hierarchy widely used for domestic and international, and examined the material data connection mechanism within CAD drawing data, and finally investigated the management systems for construction documentations and drawings in a public companies. Therefore, the expected benefit of the proposed system is that STEP drawing information management will be done standardization and the information of STEP construction drawing can be managed, shared and supported design business through materials data connection.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.97-105
• /
• 2000

One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of axisymmetric products is calculated by mathematical or graphical methods. However, in the case of non-axisymmetric products, it is difficult to calculate the exact surface area due to errors as separated components. Fortunately, it is possible for elliptical products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. So, in this study, a surface area calculating system is constructed for a design of blank shape of deep drawing products. This system consists of input geometry recognition module and three dimensional modeling module, respectively. The suitability of this system is verified by applying to a real deep drawing product. The system constructed in this study would be very useful to reduce lead time and cost for determining the blank shape and dimensions.