• 한국CDE학회논문집
• /
• 제14권3호
• /
• pp.137-149
• /
• 2009

For recent years, there has been significant research achievement on the feature-based multiresolution modeling technique along with widely application of three-dimensional feature-based CAD system in the areas of design, analysis, and manufacturing. The research has focused on several topics: topological frameworks for representing multiresolution solid model, criteria for the LOD, generation of valid models after rearrangement of features, and applications. This paper surveys the relevant research on these topics and suggests the future work for dissemination of this technology.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.33-37
• /
• 2001

본 논문은 사출성형제품의 게이트 설계를 합리적으로 수행하기 위해 사출금형설계전문가의 축적된 지식과 경험을 발췌·정리하여 지식베이스를 작성하였으며, 설계에 필요한 제품의 형상정보를 제공하기 위해 총칭형상과 특징형상 개념을 이용하여 특징형상을 정의하였다. 또한 지식베이스를 통해 산출된 설계결과를 기하학적 모델러와의 인터페이스를 통해 3차원 형상으로 보여지도록 하였으며 최종 생성된 3차원 기하학적 형상정보는 CAE 모듈이나 CAPP 모듈에서의 후속작업을 위해 제공될 수 있도록 구축되었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.326-327
• /
• 2007

We investigated whether the CT images of hepatic lesions could be analyzed by computer-aided diagnosis (CAD) tool. We retrospectively reanalyzed 14 liver CT images (10 hepatocellular cancers and 4 benign liver lesions; patients who presented with hepatic masses). The hepatic lesions on CT were segmented by rectangular ROI technique and the morphologic features were extracted and quantitated using fractal texture analysis. The contrast enhancement of hepatic lesions was also quantified and added to the differential diagnosis. The best discriminating function combining the textural features and the values of contrast enhancement of the lesions was created using linear discriminant analysis. Textural feature analysis showed moderate accuracy in the differential diagnosis of hepatic lesions, but statistically insignificant. Combining textural analysis and contrast enhancement value resulted in improved diagnostic accuracy, but further studies are needed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.905-910
• /
• 2003

Most of previous research on machining process planning has not fully included consideration on fixturing. With fixture components properly assembled with the part workpiece in a CAD modeling environment, necessary geometric information of fixture elements and their interrelations with the part model can be obtained so that machining process plans could incorporate fixturing considerations. This paper introduces an interactive fixturing system called I-Fix. I-Fix is a dowel-pin based modular fixture system, and it has been developed using Solid Edge CAD system and Visual Basic. Through customized operations of the assembly commands of the CAD system, I-Fix significantly simplifies user operations and thus reduces fixturing time. Furthermore, I-Fix enhances user convenience by providing general guidance about the fixture components and fixturing methods.

• 한국CDE학회지
• /
• 제3권2호
• /
• pp.52-58
• /
• 1997

제품 개발 환경을 자세히 들여다보면, 고객의 요구 또는 창조된 새로운 제품의 컨셉(Spec)을 사람(개발자)이 도구(설계경험, CAD)를 이용해서 업무수행절차(업무처리규정, 부서별 역할)에 따라 제품을 정의(모양, 크기, 구조)하는 것을 설계행위로 볼 수 있고, 이러한 활동의 결과로써 도면 Mock-up, 각종 Document가 만들어지고 이러한 매체가 부서간, 업무공정간 의사소통의 수단으로 이용되고 있다. 여기서 CAD를 없애서는 안될 개발의 도구로 인식하고 이용하는데, 일반적으로 경쟁력있는 제품을 개발하기 위한 노력의 일환으로 3차원 CAD시스템을 도입하여 적용해 오고 있다. 현재의 3차원 CAD시스템들은 공통적으로 솔리드(Solid) 근간에, FEATURE 개념을 수용하면서 PARAMETRIC 또는 VARIATIONAL 모델링 기법을 채택하여 설계자들에게 다양한 기능을 제공하고 있다. 그러나 3차원 CAD 시스템을 적용하여 만족할 만한 결과를 얻어내기란 간단한 문제가 아니다. 본 고에서는 당 사업장에서 개발한 무선전화기 및 FAX에 3차원 설계를 적용한 사례를 중심으로, 3차원 설계에 대한 허와 실을 살펴보고 3차원 설계가 나아가야 할 방향에 대해 생각해 보고자 한다. 참고로 당 사업장은 디자인, 기구설계, 금형설계까지는 I-DEAS, CAM 작업은 CATIA를 이용하고 있다.

• 복식문화연구
• /
• 제10권5호
• /
• pp.542-554
• /
• 2002

The purposes of this study were to investigate, analyze, and consider the feature and practical situation of Apparel CAD education and distribution situation of CAD system so that CAD education can be effectively operated and managed in various kinds of relevant schools and universities. 32 colleges and universities that are performing CAD educational system are selected for the study. The author of the study has investigated and obtained the information through questionnaires to 32 professors who are in charge of CAD lectures and 301 students who are receiving CAD education. The result is as follows. 1. It showed that 62.5% of CAD educational systems have been practically introduced after 1995. Regarding the using system, YUKA occupies 46.9%, PAD 21.8%, and GERBER 18.8% and these three kinds of system have been chiefly supplied. 40.6% of them own only one system, 37.5% of them own 2～5 systems and 78% of them own less than 5 systems. 2. The most seriously pointed problems during the operation of CAD system were the lack of experimental materials and the frustration of manpower supply. Thus, the CAD education programs in schools and universities are practiced in inferior environments internally and externally. 3. Regarding the practical situation of CAD education, 28 among 32 schools and universities are performing CAD as one of the regular subjects for the curriculum. 4. Regarding satisfaction degree of the using system, professors showed higher satisfaction degree than students did. In conclusion, it showed that although the practical situations of CAD education in schools and universities have been changed and improved so much since 1995 owing to the increase of the positive recognition of the necessity of CAD, many students in the educational sites cannot study their favorite subjects related with CAD program with interest due to the lack of experimental facilities, the poor computer management systems, and the problems of manpower supply, etc.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1075-1084
• /
• 2014

플랜트 설계를 위해서는 기자재 카탈로그를 구축해야 한다. 기자재의 3 차원 CAD 모델은 목적에 따라 서로 다른 상세도를 가진다. 기자재 제작사는 높은 상세도를 갖는 CAD 데이터를 제공하는 반면에 플랜트 엔지니어링사는 낮은 상세도를 가지는 CAD 데이터가 필요하다. 이와 같은 문제를 해결하기 위해서 기자재 3D CAD 조립체 데이터를 자동으로 간략화하는 시스템을 개발하였다. 이 논문에서는 간략화 시스템의 구조, 상세 기능과 함께 카탈로그 생성을 위한 중립 데이터 형식을 제안한다. 그리고 프로토타입 시스템을 이용한 간략화 실험 결과를 설명한다.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.128-137
• /
• 2006

In this paper, a CAD/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares for a complex model in which the modeling by parametric feature is not easy to apply. Unigraphics is used for CAD modeling, in which the process is automated by using UG/Knowledge Fusion for modeling itself and UG/Open API function for the other functions respectively. Structural analyses are also carried out automatically by ANSYS using the imported parasolid model. The developed system is applied for the PLS(Plasma Lighting System) consisting of more than 20 components, which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The analyses include responses by static, wind and impact loads. As a result of analyses, tilt assembly, which is a link between upper and lower body, is found to be the most critical component bearing higher stresses. Experiment is conducted using MTS to validate the analysis result. Optimization is carried out using the software Visual DOC for the tilt assembly to minimize material volume while maintaining allowable stress level. As a result of optimization, the maximum stress is reduced by 57% from the existing design, though the material volume has increased by 21%.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.242-256
• /
• 1996

Although feature-based design is a promising approach to fully integrating CAD/CAM, current feature-based design approaches seldom provide methodologies to easily define and design features. This paper proposes a new approach to integrating parametric design with feature-based design to overcome those limitations by globally decomposing a design into a set of features and locally defining and positioning each feature by geometric constraints. Each feature is defined as a parametric shape which consists of a feature section, attributes, and a set of constraints. The generalized sketching and sweeping techniques are used to simplify the process of designing features. The proposed approach is knowledge-based and its computational efficiency in geometric reasoning is improved greatly. Parametrically designed features not only have the advantage of allowing users to efficiently perform design changes, but also provide designers with a natural design environment in which they can do their work more naturally and creatively.

• 한국CDE학회논문집
• /
• 제12권5호
• /
• pp.395-404
• /
• 2007

Feature-based modeling and history-based modeling are the two main paradigms that are used in most of current CAD systems. Although these modeling paradigms make it easier for designers to create solid model, it may pose dependency constraints on features that are interacting one with another. When editing such features, these constraints often cause unpredictable and unacceptable results. For example, when a parent feature is deleted, the child features of the parent feature are also deleted. This entails re-generations of the deleted features, which requires additional modeling time. In order to complement this situation, we propose a method to delete only the features of interest by disconnecting the dependency constraints. This method can provide designers with more efficient way of model modification.