• Computers and Concrete
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2024

The design of disturbed regions in reinforced concrete structures usually applies the well known Strut and Tie Method (STM). As an alternative, the Stringer-Panel Method (SPM), an intermediate model between STM and the Finite Element Method (FEM), consists in dividing a structure into two distinct elements: the stringers (which carry axial forces) and panels (which carry shear forces). SPM has already showed good applicability in manual calculations and computer implementations, and its most known application was SPanCAD, an AutoCAD plugin for linear and nonlinear analysis by SPM. Unfortunately, SPanCAD was discontinued by the developers, and it's not compatible with the most recent versions of AutoCAD. So, this paper aims to present a computer program that was developed as an upgrade to the latter: the Stringer Panel Modelling Tool (SPMTool), which is intended to be an auxiliary design tool and it presents improvements, in comparison to SPanCAD. It is possible to execute linear and nonlinear analysis by three distinct formulations: Modified Compression Field Theory (MCFT), Disturbed Stress Field Model (DSFM) and Softened Membrane Model (SMM). The nonlinear results were compared to experimental data of reinforced concrete elements that were not designed by SPM; these elements were also analyzed in SPanCAD. On overall, SPMTool made more realistic predictions to the behavior of the analyzed structures than SPanCAD. Except for DSFM predictions for corbels (1.24), in overall average, the ultimate load predictions were conservative (0.85 to 0.98), which is a good aspect for a design tool. On the other hand, the cracking load predictions presented overestimations (1.06 to 1.47) and higher variations (25.59% to 34.25%) and the post-cracking behavior could not be accurately predicted; for this use case, a more robust finite element software is recommended.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.473-478
• /
• 2002

Reverse Engineering is to find CAD model through measured data of a physical model which is not available in CAD model. The measured data are obtained from measuring with Coordinate Measuring Machine or Laser Scanner This paper introduces efficient methods of reconstruction through the application of the Reverse Engineering using Modified B-spline approximation.

• IE interfaces
• /
• v.21 no.4
• /
• pp.394-402
• /
• 2008

The objective of this paper is to design segmentation algorithm for applying the breast ultrasound image to CAD(Computer Aided Diagnosis). This study is conducted after understanding limits, used algorithm and demands of CAD system by interviewing with a medical doctor and analyzing related works based on a general CAD framework that is consisted of five step-establishment of plan, analysis of needs, design, implementation and test & maintenance. Detection function of CAD is accomplished by Canny algorithm and arithmetic operations for segmentation. In addition to, long computing time is solved by extracting ROI (Region Of Interests) and applying segmentation technical methods based morphology algorithm. Overall course of study is conducted by verification of medical doctor. And validity and verification are satisfied by medical doctor's confirmation. Moreover, manual segmentation of related works, restrictions on the number of tumor and dependency of image resolution etc. was solved. This study is utilized as a support system aided doctors' subjective diagnosis even though a lot of future studies is needed for entire application of CAD system.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.557-564
• /
• 2018

As promotion of the 3D printer supply policy, need for 3D printer education is emphasized. But it is few that study of 3D printing educational program teachers can utilize at school. Especially study of CAD SW is very urgent because most of the CAD SW for 3D modeling is difficult and expensive. So in this study, we examine the CAD SW for educational purposes and propose educational programs that can be used at primary school. The instructional model is called "MDIAP" which consists of five stages : Motivation, Demonstration, Imitation, Application, Presentation. Instructional process is consisted of performing tasks and projects. We expect to enhance the function of 3D modeling and creative thinking which is essential to the Fourth Industrial Revolution society.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.27-34
• /
• 2006

Designers should know CAD tool/license information such as available number of licenses or tools, types, and configuration methods to use CAD tools properly in their group. Usually, this information is provided by managers who administrate CAD tool and license servers in the specific design group. In the previous CAD tool/licenses sharing methods, designers have to get CAD tool/license information manually and setup the environments with their own hands. n a new designer comes into the design working group, the designer wastes unnecessary design time, because of these processes. As a result, designer's poductivity and utilization of CAD tools will decrease Besides, managers also waste their time and effort, since they should provide CAD tool/license information manually to each designer. In this paper, we present an automated scheme to share CAD tool/license information based on directory service. The proposed methods automate the communication processes between managers and designers that minimze unnecessary time to share CAD information. In addition, as this system maintains the consistency of CAD information automatically that remove the repeated work of managers and designers, it improves the enciency of sharing. Besides, it automates the license configuration steps using prof(y Last, we offer Executable Proxy which is proper for thin CAD application. We believe this scheme will reduce designers and managers' time and effort as well as maximize the utilization of CAD tools.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.269-278
• /
• 2018

In Korea, BIM technology is applied mainly to building construction projects, but is expected to be applied rapidly to civil engineering projects because the government is currently considering the mandatory application of BIM for infrastructure facilities. Because the infrastructure project is processed in a horizontal work area, the application of BIM technology is more useful in the schedule management of the construction phase than the interference management of the design phase. The 4D CAD system is a typical BIM technology applied to the schedule management in the construction phase, but the application to the actual project is limited due to the lack of practical functions. This study examined the functions of four representative 4D CAD systems commercialized so that the selection criterion can be provided according to the characteristics of the project, and suggests that the functions that should be improved to have practicability. As a result of functional analysis, the application characteristics of each system were analyzed and the user convenience was suggested. In addition, a linear 4D simulation methodology was developed to improve the functions applicable to civil engineering projects, and ways to improve the utilization of the infrastructure projects as the construction phase BIM were suggested. In railway and road construction projects, most activities, such as earthwork, bridges, and tunnels proceed along the distance axis in a horizontal space. Therefore, a linear 4D simulation method, in which an activity is expressed along a distance axis, can be more practically useful rather than a simple 4D simulation method with a Gantt chart.

• Journal of the Ergonomics Society of Korea
• /
• v.1 no.1
• /
• pp.29-34
• /
• 1982

Traditional methodologies for ergonomic evaluation are too laborious to be accepted broadly. CAD flex- flexibility and its ease can be a key to breaking this barrier. In this paper, a biokinematic modelis suggested for interactive computer aided ergonomic evaluation. Model parameters are derived and validated by regression analysis. This model showes more flexibility than the stick and joint models. An application is presented to show the clarity of this approach.

• Journal of Technologic Dentistry
• /
• v.33 no.2
• /
• pp.137-145
• /
• 2011

Purpose: To evaluate the accuracy of zirconia copings in terms of clinical verified for the clinical application of CAD/CAM. Methods: Zirconia copings (n=5) were prepared using CAD/CAM system and were sintered using the relevant electrical induction furnace, which uses a 2h sintering program with a maximum temperature of $1500^{\circ}C$. The copings placed at the models and the interval values were measured. Results: The meas interval values between the die and the zirconia copings were $44.14{\mu}m$(A), $44.57{\mu}m$(B), $44.72{\mu}m$(C). 51.05 ${\mu}m$(D). Conclusion: The maximum interval values between the die and the zirconia copings were $51.3{\mu}m$ which is acceptable for clinical use. ${\mu}m$ Proper understanding of the test conditions will help enhancing the accuracy of zirconia coping.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.180-187
• /
• 2003

A CAD-based seamless design system for MEMS named DS/MEMS was developed which performs coupled-field analysis, optimal and robust design. DS/MEMS has been developed by means of integrating commercial codes and inhouse code-SolidWorks, FEMAP, ANSYS and CA/MEMS. This strategy results in versatility that means to include various analysis model, corresponding analyses and approximated design sensitivity analysis and user friendliness that design variables are taken to be selectable directly from a CAD model, that the problem is formulated under a window environment and that the manual job during optimization process is almost eliminated. DS/MEMS works on a parametric CAD platform, integrating CAD modeling, analysis, and optimization. Nonlinear programming algorithms, the Taguchi method, and response surface method are made available for optimization. One application problem is taken to illustrate the proposed methodology and show the feasibility of DS/MEMS as a practical tool.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.97-103
• /
• 2008

In this paper, the Post Process for the manifold complex processing using CAD/CAM Software of two and a half Dimensions(2.5D) has been developed to maximize the application of the manifold manufacturing machine. Many companies are currently making use of high price systems to improve manufacturing process using the multi-axial complex manufacturing machine. In accordance with the requirements, the utilization of CAD/CAM Software for the manifold complex manufacturing machine is earnestly demanded. However, the experts who have experience in manifold manufacturing machine are insufficient. Consequently the outcomes of the Post Process for 2.5D CAD/CAM Systems have been dealt in order to be smoothly operated by those who have basic skills and be understood in process drawings. CNC program functions can be specially used as they are, when drawn up. The Post Process for the original point designation and transformation of coordinates has been developed and applied. The results gave proof of practical manufacturing outcomes.