• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.7-10
• /
• 1995

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.3
• /
• pp.49-58
• /
• 2006

In the 21st century, fashion design trend is focused on 'retro'. 'Retro' is the one of the important trends in this century. In the rapidly changing present, the more people want to find a clue to the hope and happiness from the past nostalgia. Reflecting such people's desire, retro fashion has boomed again from 2000 as one of powerful trends. This research conforms the meaning of retro fashion and characteristic of retro fashion design. And through this processing, it was find that retro fashion design had lost century retro romantic fahion image. Therefore, in this research, the processing about development of retro dress design of retro romantic fashion image was showed by using CAD. The results of this study are as followings. First, Retro fashion is worth the high value of good producr of new and creative for consumers who pursuit tranquil mood in the midist of dailly change Second, Nostalgia and revival of style for each 10 years after 1920's is well brought out in Retro trend of modernt fashion. Also decorative and elegant style are marked by retro romantic fashion mood. Third, fashion design using the computer graphics was presented by application retro romatic image. It is mixed with elegance and modernity based on retro feeling, It is suggested that computer graphics was effectively used in fashion design development to the newly romantic and modern style through 1950'-1960'intimate retro fashion image.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.181-187
• /
• 2012

Various computer-based simulation tools such as 3D-CAD and CAE systems are widely used to design automotive body structure at the early phase of design. Designers must search the optimal solution that satisfies a number of performance requirements by using their tools and a trial-and-error approach. In the previous three reports, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer's preference, and its effectiveness has been illustrated with a simple side-door impact beam design problem and real vehicle side-door structure design. This report presents the development of integrated 3D-CAD and CAE system, and the applicability of our proposal for obtaining the multi-objective satisfactory design solutions by applying to an automotive front-side frame.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.24 no.1
• /
• pp.25-38
• /
• 2015

Since its introduction to the dentistry, the CAD/CAM technology has been used over fifteen years. The application of CAD/CAM started from coping fabrication, expanded to the posterior full crown, and anterior restoration manufacture has also become widespread recently. While the development of machine was rapid, the advance of zirconia block was the fastest. Although some differences exist among individuals, the various natural tooth color can be expressed through the zirconia coloring itself without porcelain build up. And the texture characteristics can be reproduced just by CAD design. In this article, the development history of digital dentistry was summarized.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.714-719
• /
• 2000

In this paper, an application program is made to simulate the behavior of a ship block under various crane works and to generate data of lu9 reactions and wire tensions. The program is based on a CAD program, Pro/ENGINEER. A ship is composed of more than 100 ship blocks. In order to lift, move, turn, or put a ship block at a convenient location fur assembling, workers in a shipyard use cranes, wires, and lugs temporarily attached to the block. In the procedure of lifting and turning a ship block with a crane, it is important to find suitable lug points and wires to do the handling efficiently and prevent accidents. Evaluation of forces in lugs and wires is necessary, but the problem is rather complex due to nonlinearity and nonuniqueness. In the present development, the nonlinear system of equations for quasi-static equilibriums is derived and a Newton type solution method is adopted to solve the system. The importance of initial estimates to the solution is illustrated and two approaches are utilized and compared. With the program developed, users can assign lug points on the CAD model by mouse and choose various linking devices at each crane point. Users can try to simulate the motion for any prescribed conditions, compare the motion of the block and the reactions and choose appropriate lug points and the type of wires and lugs.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.60-69
• /
• 2010

Outfitting systems in marine vessels have many kinds of standard parts. Ship CAD system should support the designers with an efficient tool for the modeling of outfitting parts such as pipes and valves. We develop a practical procedure for a part master model that combines ship CAD systems with the industrial standard. Part master or catalogue database of standard equipments is included in the database of ship CAD. The part master makes the associations of three dimensional modeling with the industrial standard. Moreover, it reflects the automatic modeling to maintain attributes that are disclosed in the entity of each part master in order to reduce the modeling time. Entity and attributes of pipe and valves are chosen from JIS(Japanese Industrial Standards) in order to explain the proposed procedure. Suggested procedure explains that three dimensional model of equipment is generated by parsing the pre-defined attributes after the entities of part masters is stored in database.

• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.165-178
• /
• 1999

Knitwears it was only for the innerwear, but which has become more available for sportswear and highly valuable formal-dresses for women's apparel and is set a trend toward high value-added products worldwide. Also the industry connected knitwears is more widely applicative than woven industry and is running on the well founded basement for the small enterprises. This study notes that what problems are caused and which utilities can be expected when we design knitwears by Primavision and Texpia CAD system considered the programs for development of domestic knitwears industry. There are much various benefits for designing knitwears from CAD system as shortening working hours, convenience, accuracy, quality control and productivity. It doesn't depend on designer's technique, sense and experiences, but provides, through building the design accuracy, chance to have a precise communication with buyers to be satisfied with the multiplicity, uniqueness and high-quality resulting from reducing the mistake on the operation. But there are some problems for using CAD design system those are no selections for the form, type and thickness of the yarn. Even though it is knitted by the same gauge, the texture conditions show complete difference if the form and thickness is different with. The gauge control without regarding those ought to be improved and the yarn designing function should be appended like in a tektite design. And the CAD design system can not reflect the variables of operating knitting machine and needle. The CAD design system provides the manufacturers with merits those they can change the colors easily to select which one appeals to the customer and check the effects of producing and modeling on monitor. But, in the each producing progress, there are still problems to reduce the practical steps, so intensive care is required of each part.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1010-1017
• /
• 2013

Current global textiles and fashion industries have gradually shifted focus to high value-added, high sensibility, and multi-functional products based on new human-friendliness and sustainable growth technologies. Textile design CAD systems have been developed in conjunction with computer hardware and software sector advances. This study compares the patterns or images of actual woven fabrics and virtual fabrics prepared with a textile design CAD system. In this study, several weave structures (such as fancy yarn weave and patterns) were prepared with a shuttle loom. The woven textile images were taken using a CCD camera. The same weave structure data and yarn data were fed into a textile design CAD system in order to simulate fabric images as similarly as possible. Similarity Index analysis methods allowed for an analysis of the index between the actual fabric specimen and the simulated image of the corresponding fabric. The results showed that repeated small pattern weaves provide superior similarity index values than those of a fancy yarn weave that indicate some irregularities due to fancy yarn attributes. A Complex Wavelet Structural Similarity(CW-SSIM) index resulted in a better index than other methods such as Multi-Scale(MS) SSIM, and Feature Similarity(FS) SSIM, across fabric specimen images. A correlation analysis of the similarity index based on an image analysis and a similarity evaluation by panel members was also implemented.