• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.308-314
• /
• 2017

PURPOSE. The purpose of this study was to analyze the retention force changes and wear behaviours of double-crown systems over long-term use. MATERIALS AND METHODS. Ten groups, each consisting of six samples, were evaluated. Specifically, casting gold alloy primary crown - casting gold alloy secondary crown (AA), laser sintering primary crown - laser sintering secondary crown (LL), casting Cr alloy primary crown - casting Cr alloy secondary crown, (CC) zirconia primary crown - electroformed secondary crown (ZA), and CAD/CAM titanium alloy primary crown - CAD/CAM titanium alloy secondary crown (TT) groups were evaluated at cone angles of $4^{\circ}$ and $6^{\circ}$. The samples were subjected to 5,000 insertion-separation cycles in artificial saliva, and the retention forces were measured every 500 cycles. The wear levels were analyzed via SEM at the beginning and end of the 5,000 cycles. RESULTS. In all samples, the retention forces increased when the conus angle decreased. The highest initial and final retention force values were found in the $LL-4^{\circ}$ group (32.89 N-32.65 N), and the lowest retention force values were found in the $ZA6^{\circ}$ group (5.41 N-6.27 N). The ZA groups' samples showed the least change in the retention force, and no wear was observed. In the other groups, wear was observed mostly in the primary crowns. CONCLUSION. More predictable, clinically relevant, and less excursive retention forces can be observed in the ZA groups. The retention force values of the LL groups were statically similar to those of the other groups, except the ZA groups.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• 구강회복응용과학지
• /
• 제34권1호
• /
• pp.46-55
• /
• 2018

치조골의 흡수와 치주조직의 염증을 동반한 심한 치주질환 환자에서 임플란트를 통한 구강 회복은 임상적으로 어려움이 있다. 하지만 골 형태에 따른 적절한 임플란트 식립 위치를 선정한다면 불필요한 골 이식이나 연조직 수술을 최소로 할 수 있다. 최근에는 cone beam CT 촬영과 소프트웨어를 이용하여 환자의 해부학적 형태와 보철적인 위치를 고려하여 임플란트 식립 위치를 선정할 수 있게 되었고 3D printing 기술을 통해 제작된 surgical guide를 통해 계획된 위치로 정확한 수술이 가능하게 되었다. 본 증례는 70세 여성 환자로 심한 치주질환으로 인해 전악 치아의 발치가 필요하였으며 임플란트 지지 고정성 보철물로 전악 구강회복을 시행하였다. 수술 시에는 보철적인 위치를 고려한 surgical guide를 이용해 flapless 방식으로 임플란트를 식립하였고 수술 전에 CAD/CAM 방식으로 제작된 임시보철물을 즉시 부하하였다. 이후 맞춤형 지대주와 지르코니아를 이용한 보철물을 제작하였으며, 만족스러운 심미 및 기능 회복을 보였기에 보고하는 바이다.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.243-249
• /
• 2001

Statement of the problem. The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems or Copy-milling systems there is a need for evaluating the quality levels of these new fabrication techniques. Purpose. This study was to evaluate the fitting accuracy of machined all-ceramic crowns made out of an industrially prefabricated feldspathic porcelain. Material and Methods. Three master models with different cutting depth (0.8mm/1.0mm/1.2mm)were produced using a palladium-silver alloy. A total of 36 working dies, 12 of each form, was used for the modellation of prototype resin copings and 36 additional crowns, 12 of each cutting depth, were produced by using the $CEREC^{(R)}2$ system for all crowns. The maginal fit of all 72 crowns was then evaluated on their respective master die at 54 circularly staggered points of measurement per crown under a fixation pressure of 30 N by using a computerized video image system. Results. The medians of the copy-milled $CELAY^{(R)}$ crowns ranged from 29 to $36{\mu}m$. The highest value for the marginal gap was found in group B (cutting depth 1.0mm) at $107{\mu}m$. The median for the $CEREC^{(R)}2$ crowns was found between 43.5 and $70{\mu}m$. The maximum values for all three groups ranged from $181{\mu}m$ to $286{\mu}m$. With $286{\mu}m$ the highest value for marginal gap was found in group C. the Kruskal-Wallis test and multiple comparisons analysis procedure revealed a significant influence of the production technique on the marginal fit in all three groups (p<0,02). Conclusion. 1. The $CELAY^{(R)}$ system is capable to produce all-ceramic crowns with a significantly better marginal fit than the $CEREC^{(R)}2$ system. 2. As far as premolar crowns produced with the $CEREC^{(R)}2$ system are concerned, the cutting depth has a significant influence on fitting accuracy. 3. The production of crowns with an acceptable marginal fit is possible with both systems. However, adhesive luting is recommended for milled feldspathic porcelain crowns.

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.79-87
• /
• 2021

구강 스캐너를 이용한 디지털 인상과 CAD-CAM (Computer-aided design-computeraided manufacturing) 기술은 점차 발전하고 있다. 전통적인 인상 채득, 작업모형의 제작, 왁스 납형 제작 및 주조의 복잡한 과정이 단축되었으며 환자의 방문 횟수도 줄일 수 있게 되었다. 구강 스캐너 기술의 발전으로 디지털 인상의 정밀도와 정확성이 향상되었으며, 그 적응증은 보다 광범위한 부위의 고정성 치과보철물의 수복으로 점차 확대되어지고 있다. 본 증례 보고에서는 광범위한 부위의 고정성 임플란트 보철물의 수복을 위하여, 컴퓨터로 계획하고 가이드 수술용 템플레이트로 완전히 가이드된 수술을 하고, 즉시/조기 임플란트 보철물을 장착하였으며, 임시 보철물에서 최종 보철물로 전환하는 과정에서 구강스캐너의 지대주중첩 알고리즘을 활용하였다. 임플란트 수술 당일 획득한 구강스캔으로 맞춤형 지대주를 포함한 임시 보철물을 제작하여 활용하였으며, 최종 보철물은 임시 보철물에서의 맞춤형 지대주를 낀 채로 구강스캔하여 제작되었다. 이 과정에서 임시 보철물 장착 전에 미리 스캔해서 라이브러리화한 맞춤형 지대주 데이터를 구강스캐너 소프트웨어 '지대주 자동중첩 기능'으로 최종 디지털 인상에 자동적으로 매칭하였고, 치은연하마진인 부분도 지대주를 탈거하지 않고, 치은압배사 없이 정밀하게 획득할 수 있었다. 구강스캐너와 소프트웨어의 다양한 기술을 응용하여 임플란트 치료 과정을 디지털 워크플로우로 변화시킴으로써, 환자 불편감 및 치료 시간을 단축하였으며, 환자와 술자에게 모두 이롭고 예지성 있는 치료가 가능하였다.

• Restorative Dentistry and Endodontics
• /
• 제45권2호
• /
• pp.15.1-15.7
• /
• 2020

This clinical report describes designing and fabricating a single-retainer resin-bonded fixed dental prosthesis with a chair-side computer-aided design/computer-aided manufacturing system. The whole procedure, from tooth extraction to final placement of the prosthesis, was completed in one day, and a single clinic visit. No clinical complications were found at the 2-year follow-up after placement of the restoration, and satisfactory functional and esthetic results were achieved.

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.337-345
• /
• 2019

Purpose: The purpose of this study was to enhance curriculum satisfaction of dental laboratory technology and curriculum demands. Methods: From March 5 to March 31, 2019, a self-written questionnaire was conducted for 195 students from the department of dental laboratory technology at a university in Gangwon-do. The analytical methods used were descriptive statistical analysis, frequency analysis, cross analysis, correlation analysis and reliability analysis. The collected data was used for SPSS 18.0 for Windows statistics program. Results: The demand of the school education includes systematic experiments and demand of practical training, acquisition of professional knowledge, introduction of advanced technology curriculum, reduction of national examination-oriented curriculum, and increased professionalism and professionalism as professional professionals. Investigated by the ethics. In addition, they were strongly aware of the necessity of digital education related to CAD / CAM, and there was a high demand for how to operate programs, scanning and design. Conclusion: The curriculum needs to be reorganized to cultivate dental technicians in a changing era, and in-depth centralized curriculum in fields with high practical needs, as well as vocational and ethical views as professionals.

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.279-285
• /
• 2019

Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.

• 대한치과기공학회지
• /
• 제36권2호
• /
• pp.75-81
• /
• 2014

Purpose: This study was to compare adaptations of lithium disilicate CAD/CAM crowns fabricated with different scanning systems. Methods: This study selected the mandibular right first molar as an abutment for experiments and produced 10 working models. Lithium disilicate crowns appropriate for each abutment were produced by using a CEREC$^{(R)}$ CAD/CAM system. The independent t-test was then used to compare and analyze the data obtained from the two groups(${\alpha}$=0.05). Results: Mean(SD) adaptation were $86.93(22.82){\mu}m$ for the InS group, $88.42(26.77){\mu}m$ for the ExS group. They were no statistically significant differences between groups for adaptation(p>0.05). Conclusion: Within the limitations of this study, the results suggest that the accuracy of all investigated optical scanner were satisfactory for clinical use. Further assessment and improvement of the lithium disilicate ceramic for the fabrication of FPDs is evidently still required.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.177-184
• /
• 2014

PURPOSE. The aim of this study was to measure the changes on the marginal and internal adaptation of zirconia based anterior fixed partial dentures after the porcelain firing process. MATERIALS AND METHODS. A total of 34 anterior fixed partial dentures using LAVA CAD/CAM system (3M ESPE, Germany) were applied. Two silicone replicas were obtained: one is obtained before porcelain firing process (initial) and the other is obtained after porcelain firing process (final), followed by the examination under a binocular stereomicroscope. Kruskal Wallis and Wilcoxon Signed Ranks tests were used for the statistical analysis (P<.05). RESULTS. No statistically significant difference was found between initial and final marginal gap values (P>.05). At the internal gap measurements, final marginal area values ($59.54{\mu}m$) were significantly lower than the initial marginal area values ($68.68{\mu}m$)(P<.05). The highest and the lowest internal gap values were observed at the incisal/occlusal area and at the marginal area, respectively. In addition, lower internal gap values were obtained for canines than for central incisors, lateral incisors and premolars at the incisal area (P<.05). CONCLUSION. The firing cycles did not affect the marginal gap of Lava CAD/CAM system, but it is controversial for the internal gap.