• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.21-25
• /
• 2002

The effect of Ca-doping on the superconducting properties of Nd-Ba-Cu-O bulk superconductors, fabricated by the oxygen-controlled melt growth process, has been systematically investigated. Various c-axis textured bulk samples were grown using precursors with the nominal compositions of $Nd_{1.8-x}Ca_{x]Ba_{2.4}Cu_{3.4}O_{y}$ (x= 0.00, 0.02, 0.05, 0.10, 0.15) in a reduced oxygen atmosphere of 1%O$_2$ in Ar. Magnetization measurements revealed that the critical temperatures(Tc) were almost linearly depressed from 95K to 86K with increasing the Ca dopant from x : 0.0 to 0.15, respectively, and thus critical current densities(Jc) at 77K and for H//c-axis of specimens were gradually degraded with increasing x. Compositional analyses revealed that although the amounts of the Ca dopant both in $NdBa_2Cu_2O_y(Nd123) and Nd_4Ba_2Cu_2O_{10}(Nd422)$,/TEX> were increased with increasing x, only less than half of the initial Ca compositions were detected in melt-grown Ca-doped Nd-Ba-Cu-O bulk crystals. The supression of Tc is attributed to an increased Nd substitution for the Ba site in the Nd123 superconducting matrix with increasing the amount of the Ca dopant.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.279-284
• /
• 2008

To investigate the effects of CaCl2 on artificial induction of antlerogenesis in female deer, various CaCl2 conditions with different concentrations, dosages and times were treated to five female Elk(Cervua Canadensis). After injection of CaCl2 solution to the putative region of antlerogenesis, rate of induction, yield of antler, length of antler, number of point were examined. In regard to the effect of concentration of CaCl2 solution on the induction of antlerogenesis in the female deer, generation of pedicle and antler has not induced under treatment of 2ml and 3ml of 15％ solution, but only pedicle has generated with 4ml of 15％ solution, otherwise generation of pedicle and antler has induced under treatment of 1.5ml, 2ml and 3ml of 30％ solution and 1ml and 2ml of 50％ solution. The yields of antler were 319g in 4ml of 15％ solution, and 1,290g, 513g and 295g in 1.5ml, 2ml and 3ml of 30％ solution, respectively, and 800g and 443g in 1ml and 2ml of 50％ solution, respectively. The yields of antler of 30％ solution and 50％ solution were decreased with increase the dosage volume. The maximum yield of antler was 1,290g at 30％ 1.5ml treatment. The length of antler were 25cm in 15％ 4ml treatment, and 55cm, 51cm and 35㎝ in 1.5ml, 2ml and 3ml of 30％ solution, respectively, and 60cm and 35cm in 1ml and 2ml 50％ solution, respectively. There was a tendency that length of antler became longer as yield of antler were grew. The numbers of point were 2 in 15％ 4ml treatment, and 5, 2.3 and 1 in 1.5ml, 2ml and 3ml of 30％ solution, respectively, and 3 and 1 in 1ml and 2ml of 50％ solution, respectively. The number of point was not related to concentration and dosage of CaCl2 solution, but related to the shape of wound due to the time and method of injection. Consequently, the optimum concentration of CaCl2 solution for artificial induction of antlerogenesis in female elk is 30%.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.421-426
• /
• 2010

The transesterification of rapeseed oil, soybean oil, and mixed fat were conducted at $65^{\circ}C$ with $Al_2O_3$-supported CaO, 0.8 wt% KOH, 1 wt% NaOH and mixed catalyst. The overall conversion(%) of rapeseed oil indicated to be 96% at the 12:1 molar ratio of methanol to oil, 8 wt% CaO and 2 wt% water. The pH ranges of biodiesel for mixed fat using four catalysts and for three fats using 8wt% CaO were 7.3-9.1, 7.3-7.5, respectively. The volumes of water needed to wash biodiesel from rapeseed oil using 0.8 wt% KOH and 8 wt% CaO were 15 mL and 3 mL.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.226-229
• /
• 2014

In this study, lead-free $(Ba_{0.85}Ca_{0.15})(Ti_{1-x}Zr_x)O_3$ ceramics and a bimorph-type piezoelectric actuator were fabricated using the normal oxide-mixed sintering method, and their dielectric properties, microstructure, and displacement properties were investigated. From the results of X-ray diffraction, the pattern of the specimen has a pure perovskite structure. In addition, no secondary impurity phases were found. The excellent piezoelectric coefficient of $d_{33}=454pC/N$, the electromechanical coupling factor $k_p=0.51$, the dielectric constant ${\varepsilon}_r=3,657$, the mechanical quality factor $Q_m=239$, and $T_c$(Tetragonal-Cubic) =$90^{\circ}C$ were shown at x= 0.085. ${\Delta}k_p/k_p20^{\circ}C$ and ${\Delta}f_r/f_r20^{\circ}C$ showed the maximum value of -0.255 and 0.111 at $-20^{\circ}C$ and $80^{\circ}C$, respectively. The maximum total-displacement was $60{\mu}m$ under the input voltage of 50 V. As a result, it is considered that lead-free $(Ba_{0.85}Ca_{0.15})(Ti_{1-x}Zr_x)O_3$ ceramics is a promising candidate for piezoelectric actuator application for x= 0.085.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.219-227
• /
• 2016

Chloride ions ingress continuously in reinforced concrete through pores of it by $Cl^-$. Finally, it causes a localized corrosion of the rebar and then it generates cracks on concrete structures. Recently, new materials removing harmful anions have been developed. Layered double hydroxides(LDHs) has an excellent ability to remove harmful anions because various anions can be adsorbed in the interlayer space between divalent and trivalent cations. Thus, LDHs has been applied in various fields. Especially, LDHs is expected to be effective adsorbent binding chloride ions. In this study, $Ca/Al-NO_3$ and $Mg/Al-NO_3$ LDHs were prepared by using a co-precipitation method. $Ca/Al-NO_3$ and $Mg/Al-NO_3$ LDHs were compared and analyzed by using XRD, SEM analysis. Many nano size hexagonal crystals were observed by SEM. Experiments for binding chloride ions of LDHs were conducted by using potentiometric method. The experimental data were measured every 15 minutes. It was observed that the chloride ion content is reduced by increasing of LDHs mass fraction and the reaction rate of $Mg/Al-NO_3$ is faster than $Ca/Al-NO_3$. In future studies, binding chloride capacity in cement materials will be evaluated based on results of this study.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.524-530
• /
• 2005

Dietary effect of soyfiber beni-koji (SBK) with chitosan-ascorbate (CA) on the level of serum lipids in rats fed a high fat diet was investigated The experimental groups which were divided into high fat diet control group(HC-group), $2\%\;SBK+0.1\%$ CA mixture diet group(CA1-group), $2\%\;SBK+0.15\%$ CA mixture diet group(CA2-group), and $2\%\;SBK+0.2\%$ CA mixture diet group (CA2-group) were fed for 4 weeks. Weight gains in CA2- and CA3-group were $5.3\%\;and\;9.5\%$ lower than that of HC-group, respectively, while there was no significant difference in feed intakes, feed efficiency ratio and organs weight Level of serum triglyceride in $C_3-group\;was\;21\%$ lower than that of HC-group. Level of serum total cholesterol and LDL-cholesterol in CA2- and CA3-group were $22.1\~22.7\%\;and\;58.6\~64.3\%$ lower than those of HC-group, respectively. Atherogenic index decreased with the higher level of CA. Level of lipid peroxide in CA3-group was $24\%$ lower than that of HC-group, while there was no significant difference in GSH(Glutathione-S-transferase) content O type activities of XOD(xanthine oxidase) in the treated groups were lower, especially the activity in CA3-group was $51.6\%$ lower than that of HC-group. Also, O/T ratio of XOD was lower, showing $21.7\~23.5\%$ in treated groups and $34.0\%$ in HC-group(p<0.05). GST activities were 332.52 units in HC-group and $350.28\~355.63$ units in the treated groups, but there were no significant differences among them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.295-299
• /
• 1999

The (S $r_{1-x}$C $a_{x}$)Ti $O_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/ $SiO_2$/ Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mo1%]. The dielectric constant changes almost linearly in temperature ranges of -80~ +90[$^{\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200(kHz).)..

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.45-48
• /
• 2014

We have investigated the effects of an Ag capping layer on the emission characteristics of transparent organic light-emitting devices with Ca/Ag double-layer cathodes. The thickness of the Ag layer was varied from 10 to 30 nm, whereas the Ca was fixed to be a 10 nm in the Ca/Ag structure. The luminance and current efficiency on the cathode and anode sides are significantly dependent on the Ag thickness. For example, the current efficiency on the anode side increases from 8.4 to 11.7 cd/A, whereas, on the cathode side, it decreases from 3.2 to 0.2 cd/A as the Ag thickness increases from 10 to 30 nm. These changes in emission characteristics were investigated by measuring electroluminescence, transmission, and reflection spectra.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10267-10272
• /
• 2015

To evaluate the value of combined detection of serum CEA, CA19-9, CA24-2, AFP, CA72-4, SCC, TPA and TPS for the clinical diagnosis of upper gastrointestinal tract (GIT) cancer and to analyze the efficacy of these tumor markers (TMs) in evaluating curative effects and prognosis. A total of 573 patients with upper GIT cancer between January 2004 and December 2007 were enrolled in this study. Serum levels of CEA, CA19-9, CA24-2, AFP, CA72-4, SCC, TPA and TPS were examined preoperatively and every 3 months postoperatively by ELISA. The sensitivity of CEA, CA19-9, CA24-2, AFP, CA72-4, SCC, TPA and TPS were 26.8%, 36.2%, 42.9%, 2.84%, 25.4%, 34.6%, 34.2% and 30.9%, respectively. The combined detection of CEA+CA199+CA242+CA724 had higher sensitivity and specificity in gastric cancer (GC) and cardiac cancer, while CEA+CA199+CA242+SCC was the best combination of diagnosis for esophageal cancer (EC). Elevation of preoperative CEA, CA19-9 and CA24-2, SCC and CA72-4 was significantly associated with pathological types (p<0.05) and TNM staging (p<0.05). Correlation analysis showed that CA24-2 was significantly correlated with CA19-9 (r=0.810, p<0.001). The levels of CEA, CA19-9, CA24-2, CA72-4 and SCC decreased obviously 3 months after operations. When metastasis and recurrence occurred, the levels of TMs significantly increased. On multivariate analysis, high preoperative CA72-4, CA24-2 and SCC served as prognostic factors for cardiac carcinoma, GC and EC, respectively. combined detection of CEA+CA199+CA242+SCC proved to be the most economic and practical strategy in diagnosis of EC; CEA+CA199+CA242+CA724 proved to be a better evaluation indicator for cardiac cancer and GC. CEA and CA19-9, CA24-2, CA72-4 and SCC, examined postoperatively during follow-up, were useful to find early tumor recurrence and metastasis, and evaluate prognosis. AFP, TPA and TPS have no significant value in diagnosis of patients with upper GIT cancer.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2000

The new ion exchange resin was synthesized from chloromethylated styrene-1,4-divinylbenzene(DVB) with 1-aza-15-crown-5 macrocyclic ligand by substitution reaction. The effect of pH, time, dielectric constant of solvent and cross-linked of the matrix on the adsorption for $UO_2^{2+}$, $Ca^{2}$ and $Lu^{3+}$ was investigated. The metal ion was not adsorbed on the resins below pH 3 but above pH 4 fast adsorption behavior was showed. The optimum equilibrium time for adsorption of metallic ions was two hours. The adsorption selectivity determined in ethanol matrix was in increasing order $UO_2^{2+}>Ca^{2}>Lu^{3+}$. The adsorption power was in the order of 1%, 2%, 10% and 20% -crosslinked resin, but adsorption properties of resins decreased in proportion to the order of dielectric constant of solvents used. In addition, these metal ions could be separated in the column packed with 1% crosslinked resin by pH2.5 $HNO_3$ as an eluent.