• Title/Summary/Keyword: CA의 합성

Search Result 666, Processing Time 0.025 seconds

Synthesis of calcium phosphates from abalone shells via precipitation (전복패각을 침전법의 원료로 이용한 calcium phosphates의 합성)

  • Moon, Sung Wook;Lee, Byeong Woo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.30 no.4
    • /
    • pp.143-149
    • /
    • 2020
  • Calcium phosphates recognized as important bio-materials have been successfully synthesized by simple precipitation using waste abalone shells, which are rich mineral sources of calcium. Calcium hydroxide (Ca(OH)2) originated from abalone shells was used as calcium source (precursor) for the preparation. Synthesis of calcium phosphates was performed by reacting calcium hydroxide with phosphoric acid (H3PO4) in aqueous solution. The initial precursor Ca/P ratios were adjusted to 1.50, 1.59 and 1.67, and the effect of the composition and the heat treatment on the synthesized powders and sintered bodies was investigated. The phases of the sintered ceramics prepared at 1150℃ were hydroxyapatite (HAp), β-tricalcium phosphate (β-TCP), and biphasic phosphate (HAp with β-TCP)), which were determined by the initial precursor Ca/P ratios. The results demonstrate the possibility for the synthesis of high value-added calcium phosphates from economical starting materials with low cost and high availability.

Superconducting Phase Formation and Properties in the Bi-Sr-Ca-Cu-O System (Bi-Sr-Ca-Cu-O 계에서 초전도체 상형성 및 특성)

  • Nam, Gung-Chan;Lee, Sang-Yun
    • Korean Journal of Materials Research
    • /
    • v.6 no.6
    • /
    • pp.543-554
    • /
    • 1996
  • Bi-Sr-Ca-Cu-O 계에서 상형성에 관해 연구하였다. 임계온도가 80K인 초전도체는 Bi-Sr-Ca-Cu의 몰비율이 2:2:1:2의 성분으로부터 solid state synthesis의 방법으로 합성하였다. 이때 이상에 대한 x-ray diffraction pattern은 모두 색인하였다. 2:2:1를 기본으로한 solid solution의 형성을 Bi2Sr2-xCa1+yCu2O8+$\delta$으로 단일상(single phase)을 형성하고 있으며, 이때 x와 y의 범위는 0

  • PDF

Synthesis of Uniform CA and 90/150 Hybrid CA (Uniform CA와 90/150 Hybrid CA의 합성)

  • Kim, Han-Doo;Cho, Sung-Jin;Choi, Un-Sook;Kwon, Min-Jeong;Kong, Gil-Tak
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.3
    • /
    • pp.293-302
    • /
    • 2016
  • In this paper we analyze the CA formed by combining the uniform 102 CA $\mathbb{C}_u$ and the m-cell 90/150 hybrid CA $\mathbb{C}_h$ whose characteristic polynomial is $(x+1)^m$. We analyze cycle structures of complemented group CA derived from $\mathbb{C}_u$ and propose a condition of complemented CA dividing the entire state space into smaller cycles of equal lengths. And we analyze the cycle structure of complemented group CA $\mathbb{C}^{\prime}$ derived from the CA $\mathbb{C}$ formed by combining $\mathbb{C}_u$ and $\mathbb{C}_h$ with complement vector F such that $(T+I)^{q-1}F{\neq}0$ where $(x+1)^q$ is the minimal polynomial of $\mathbb{C}$.

Study on the Synthesis of Tricalcium Aluminate Clinker from Waste Shell and Spent Oil-Refining Catalyst (폐 패각과 정유 폐촉매를 사용한 Tricalcium Aluminate 클링커의 합성에 관한 연구)

  • Lee, Keon-Ho;Song, Tae-Woong
    • Journal of the Korean Ceramic Society
    • /
    • v.41 no.12 s.271
    • /
    • pp.933-938
    • /
    • 2004
  • The clinkerbility and the behaviour of formation of $3CaO{\cdot}Al_{2}O_3$ were studied using the mixture of waste oyster shell and spent oil-refining catalyst mainly by the mineral and microstructural observation. By virtue of the formation of $12CaO{\cdot}7Al_{2}O_3$ at relatively low temperature and its successive reaction with CaO, the $3CaO{\cdot}Al_{2}O_3$ clinkers were formed easily without affection of minor constituents contained in oyster shell. Thus clinkers were formed at $1400^{\circ}C$ directly but began to melt incongruently at higher temperature above that. Aluminium hydroxide, however, was not desirable as an aluminous raw materials of the clinker because rapid melting occurs before $3CaO{\cdot}Al_{2}O_3$ forms main clinker mineral.

Synthesis of $CaCrO_4$Powders for the Cathode Material of Thermal Battery by GNP and Electrochemical Properties of Ca/LiCl-KCl/$CaCrO_4$Thermal Battery System (GNP 방법에 의한 Thermal Battery용 양극 재료 $CaCrO_4$분말 합성 및 Ca/LiCl-KCl/$CaCrO_4$전지계의 전기 화학적인 특성 평가)

  • 이현주;김영석;김선재;이창규;김홍회;김길무
    • Journal of the Korean Ceramic Society
    • /
    • v.38 no.2
    • /
    • pp.143-151
    • /
    • 2001
  • Ca/LiCl-KCl/CaCrO$_4$열 전지계의 양극재료로서 BCT(Body-Centered Tetragonal) 결정구조를 갖는 CaCrO$_4$분말을 GNP로 합성하고, SEM, TEM, XRD를 이용하여 그 미세구조를 분석하였다. GNP 공정에 의한 CaCrO$_4$분말은 단일상으로 0.5$mu extrm{m}$ 이하의 입자 크기를 가지며 균일하게 분포한 반면, 기존의 분말 혼합법은 높은 하수 온도 및 장시간의 하소 조건을 필요하므로 미세한 분말 합성이 어렵고 pellet 형태로 만들었을 때 GNP 분말에 비해 비표면적이 현저하게 작기 때문에 전극 재료로써 유리하지 못하다. Ca/LiCl-KCl/CaCrO$_4$계의 전기 화학적인 특성을 평가해본 결과 전지셀을 Ca/DEB(LiCl-KCl+CaCrO$_4$+SiO$_2$)와 같은 DEB 형태로 만들었을 때 $600^{\circ}C$의 온도에서 2.0 V이상 (<100 mA/㎤)의 안정한 전압이 5분 이상 유지되었다. 그러나 3층 전극 셀(Ca/LiCl/KCl/ CaCrO$_4$)에서는 동일한 온도에서 2.0 V이상 (<100 mA/㎤)의 전압이 7분 이상 유지되었으나 불안정한 전압 변동 및 낮은 peak voltage로 인해 DEB 셀의 전지 특성이 더 우수한 것으로 생각된다. 양극 재료의 제조 방법의 관점에서 볼 때, 동일한 DEB(Depolarizer : Electrolyte : Binder=25 : 70 : 5 wt%) 조성의 셀 구성시, GNP 분말은 분말 혼합법에 의한 분말보다 반응 표면적이 훨씬 크기 때문에 GNP 양극 활 물질의 DEB 셀에서의 전지 수명이 더 길었다.

  • PDF

On the study of $AlSiCa(Al_2O_3-SiC-C)$ refractories: (II) Oxidation and sintering of the synthesized powders ($AlSiCa(Al_2O_3-SiC-C)$계 내화물 재료에 관한 연구:(II) 합성원료의 산화 및 소결 특성)

  • Shim, Kwang-Bo;Joo, Kyoung;Auh, Keun-Ho
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.7 no.3
    • /
    • pp.481-486
    • /
    • 1997
  • It was succeeded in synthesizing the $Al_2O_3$-SiC refractory powders, which is main raw material of AlSiCa, from the domestic Hadong Kaolin. The oxidation reaction of the synthesized $Al_2O_3$-SiC powder was examined. The activation energy for SiC in $Al_2O_3$-SiC powder was calculated to be $\Delta$G=74.86 KJ/mol in air, however the poor sinterability of the powders is thought to be due to the vaporization of SiC in $H_2$ atmosphere. The formation of the whisker-SiC gives the possibility in use for high temperature structural material over high temperature refractory brick.

  • PDF

Synthesis and characterization of CaZrO3:Pr3+ phosphor by skull melting method (스컬용융법에 의한 CaZrO3:Pr3+ 형광체 합성 및 특성분석)

  • Choi, Hyunmin;Kim, Youngchool;Seok, Jeongwon
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.31 no.5
    • /
    • pp.228-232
    • /
    • 2021
  • Ca1-xZrO3:xPr phosphor with perovskite structure was successfully synthesized by using skull melting method. The crystal structure, morphology and optical properties of synthesized phosphor were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet fluorescence reaction and photoluminescence. The XRD results indicated that single crystals of CaZrO3:Pr3+ belongs to orthorhombic perovskite system. The synthesized phosphor could be excited by UV light (254 nm) and the emission spectra results indicated that green luminescence of CaZrO3:Pr3+ due to charge transfer transition 3P03H4, 3P13H5 and 3P03H5 at 506, 536 and 548 nm was dominant.

The substitution effect of Langasite $(La_3Ga$_5SiO_{14})$-type compound, $Ca_3TaGa_3Si_2O_{14}$ crystals on their synthesis and crystal growth (Langasite$(La_{3}Ga$_{5}SiO_{14})$-type 인 $Ca_{3}TaGa_{3}Si_{2}O_{14}$ 결정의 합성과 경정성장에서의 치환효과)

  • Young Suk Kim;Keun Ho Auh
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.11 no.6
    • /
    • pp.285-289
    • /
    • 2001
  • We investigated that each site was substituted by new chemical components in Langasite ($La_3Ga_5/SiO_{14}$)-type structure with superior piezoelectric characteristics than $La_3Ga_5/SiO_{14}$. In this study $Ca_3TaGa_5Si_{2}O_{14}$ was synthesized by soilid-state reaction and grown by the $\mu$-PD(micro-pilling-down)and Cz technique. Lattice parameter and chemical composition was investigated by XRD and EPMA respectively.

  • PDF

Studies on the Fabrication and Properties of $La_{1-x}Ca_xMnO_3$ by Glycine-Nitrate Process and Solid State Reaction Method fort the CMR sensor (CMR sensor 응용을 위한 자발착화 연소합성법(GNP)과 고상반응법에 의한 $La_{1-x}Ca_xMnO_3$ 분말의 제조 및 물성에 관한 연구)

  • Kang, Young-Chul;Park, Sung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1999.05a
    • /
    • pp.137-141
    • /
    • 1999
  • 금속 다층박막과 미세입상 합금박막에서 발견된 Giant Magnetoresistance(GMR) 현상에 고무되어 최근에는 50년대에 밝혀졌던 산화물 자기저항 재료에 관하여 새롭게 연구하고 있으며 perovskite 구조를 가지는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 박막에서 큰 자기저항을 얻었으며 이를 Colossal Magentoresistance (CMR) 이라 부른다. 본 연구에서는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 분말을 하소온도를 700-90$0^{\circ}C$로 변화시킨 고상반응법과 자발착화연소합성법(Glycine-Nitrate Process) 으로 각각 제조하였으며 비교 분석하였다. TG-DTA을 이용하여 불순물과 미반응 물질을 확인하여 적당한 하소 온도를 결정하였고 XRD를 이용하여 결정상을 분석하였다. 주사전자현미경(SEM)으로 각각 제조된 분말의 하소후 입자의 크기를 비교하였다. GNP법으로 합성한 경우가 고상반응법을 이용한 경우보다 입자의 크기가 submicron 단위로 미세하고 균질하며 고순도의 perovskite 구조를 갖는 La$_{1-x}$ Ca/xub x/MnO$_{3}$ 분말을 얻을 수 있었다.었다.

  • PDF

Synthesis and Optical Properties of Ca1-xSrxS:Ce Phosphors (Ca1-xSrxS:Ce 형광체의 합성과 광 특성)

  • Heo, Yeong-Deok;Seong, Hye-Jin;Do, Yeong-Rak
    • Journal of the Korean Chemical Society
    • /
    • v.50 no.6
    • /
    • pp.471-476
    • /
    • 2006
  • series of Ca1-xSrxS:Ce phosphors were synthesized by solid-state reactions. The Ca1-xSrxS:Ce phosphors have a strong absorption in region from 430 nm to 470 nm. The emission peaks of CaS:Ce are located at 510 nm and 570 nm. The partial replacement of Ca by Sr in Ca1-xSrxS:Ce causes a blue shift of emission wavelengths. The Ca1-xSrxS:Ce can be used as bluish green and yellow emitting phosphors for white light emitting diodes (LEDs) pumped by the blue LED. We reported the optical properties of Ca1-xSrxS:Ce phosphors for application in phosphor converted white LEDs.