LNG Value Chain에서 액화플랜트는 고부가가치를 지니며 전체 Cost의 약 35%를 차지한다. 액화플랜트의 핵심기술은 액화공정이며, 여기서 발생하는 대부분의 Cost는 액화공정의 운전에 필요한 에너지 생성과정에서 소비된다. 액화공정의 에너지소비를 줄이기 위한 방법은 액화공정의 핵심공정인 액화사이클의 효율을 높이는 것이다. 세계적으로 널리 이용되고 액화 효율이 높은 LNG 플랜트의 액화공정은 C3MR(프로판과 혼합냉매) 공정이다. C3MR 공정은 프로판 사이클과 혼합냉매 사이클을 이용하여 천연가스를 액화시키는 공정이다. 본 연구에서는 C3MR을 대상공정으로 하여 공정분석과 공정모사를 수행하였다. 이를 통해 C3MR의 공정변수를 알아내었으며 이후 공정최적화를 수행하였다. 본 연구에서 수행한 C3MR의 공정분석, 공정변수, 최적화 결과는 새로운 액화 공정개발에 활용 될 것으로 생각된다.
본 연구에서는 온도조건에 따른 MR 유체의 물리적 특성을 연구하고자 침전 및 전단응력실험을 수행하였다. MR 댐퍼에 사용되는 MR 유체는 자성 파우더를 포함하고 있어 침전현상이 발생하므로 침강성과 인가전류에 의한 전단응력 변화를 상온과 고온조건에서 실험하였다. 침강특성을 조사하기 위하여 강제 대류형 오븐을 인가전류에 의한 전단응력을 측정하기 위하여 점도계를 사용하였다. 실험결과로부터 MR 유체는 시간과 온도에 따른 침강 특성이 다름을 그리고 교반시간이 큰 경우에 MR 유체의 분산성이 2배 이상 우수하였다. 전단률이 증가할수록 전단응력은 로그함수의 증가분포를 인가전류를 증가할수록 2차 함수의 증가분포를 그리고 MR 유체의 전단응력은 상온보다 고온에서 6-18% 낮은 분포를 보였다.
이번 연구의 목적은 세계적으로 널리 이용되고 있고, 액화 효율이 높은 Air Products and Chemicals Inc. (APCI)사(社)의 C3MR(Propane Pre-cooled & Mixed Refrigerants) 천연가스 액화공정에 사용되는 혼합냉매의 최적 조성을 통계학적 기법으로 결정하는 것이다. 공정모사는 상업 공정 모사기를 이용했으며 혼합냉매는 methane ($C_1$), ethane ($C_2$), propane ($C_3$)과 nitrogen ($N_2$)로 선택하였다. 그리고 혼합물 설계(mixture design, MD)와 중심합성계획법(central composite design, CCD)을 이용하여 전체 공정의 에너지 소비가 최소가 되게 하는 최적의 혼합냉매 조성을 결정하였다. 연구결과 기존 설계 대비 최대 11.28%의 에너지 소비 절감을 확인하였다. 또한 주 극저온 열교환기(main cryogenic heat exchanger, MCHE)의 온도 프로파일을 통해 열적 효율성도 함께 비교하였다.
천연가스의 이송을 위해 현재까지 가장 효율적인 방법은 액화를 통한 운반이다. 천연가스를 액화하기 위해서는 $-160^{\circ}C$이하로 냉각시켜야 하는데, 그 방법에는 여러 가지가 있다. 본 논문에서는 가장 대표적인 액화 공정인 C3MR 공정에 대한 제어 방법에 대해 연구하였다. 천연가스 액화 공정의 제어는 천연가스 품질을 유지할 수 있는 도구이며 안정된 운전을 보장하는 수단이다. C3MR 공정을 분석하고 제어 밸브에 대한 제어 변수를 선택하고 제어 변수의 계단 응답 결과를 통해 혼합냉매의 제어 구조를 도출 하였다. 도출된 제어 결과를 동적 모사를 통해서 임의로 외란을 주어 정상상태를 유지하는 결과를 확인 하였다.
천연가스 액화공정은 극저온에서 운전되며 에너지 소비가 매우 크기 때문에 압축기의 에너지 소모를 최소화하는 것이 공정의 효율 측면에서 중요하다. 여러 가지 천연가스 액화공정 중 C3-MR(Propane Pre-cooled Mixed Refrigerant) 공정의 경우 순수냉매인 프로판과 혼합냉매를 사용하는 두 개의 냉각 사이클로 구성되어있다. 본 연구에서는 C3-MR 공정에서 최적의 프로판 압력 레벨을 찾기 위해 프로판 사이클을 별개로 구성하여 모사하였다. 또한, 압력 레벨에 따른 조건을 변화시켜가며 사례 연구를 수행하고 이를 통해 압축기에서 소모되는 에너지양을 비교하였다. 그 결과 압력 레벨이 높을수록 총 에너지 소모량이 감소하는 것을 확인 할 수 있었다. 압력 레벨이 3일때 보다 압력 레벨이 5일 때 에너지 소모는 약 23.7% 감소하는 값을 얻을 수 있었다.
Heo, K.N.;Odle, J.;Oliver, W.;Kim, J.H.;Han, In K.;Jones, E.
Asian-Australasian Journal of Animal Sciences
/
제12권6호
/
pp.908-913
/
1999
This experiment was conducted in three trials to evaluate optimal ambient temperature for a novel milk replacer feeding system designed for early-weaned pigs, compared to commercial dry diets fed within a conventional hot nursery. A total of 165 PIC genotype pigs were weaned at $13.89{\pm}0.7$ days of age and allotted to one of two dietary treatments in three trials based on weight and litter origin. Each trial consisted of pigs fed dry diets (DD) and pigs fed milk replacer (MR) which was offered in one of 3 different ambient temperatures. Pigs fed milk replacer were housed in a specialized nursery building in which one half of each pen contained an enclosed hover that was thermostatically maintained at $32^{\circ}C$ while the exterior ambient temperature (where milk was fed) was set at either 17 (trial 1), 24 (trial 2) or $32^{\circ}C$ (trial 3). Pigs fed dry diets with the conventional nursery were maintained at $30^{\circ}C$ for each trial. From d 21 to d 49, all pigs were fed DD within a standardized hot nursery environment. During the first week (d 14-21), pigs fed MR showed increased ADG from 214% to 228% over control pigs fed DD (p<0.001), regardless of ambient temperature. As ambient temperature was increased from 17 to 24 to $32^{\circ}C$, ADG of MR-fed pigs was increased by 214%, 220% and 228% over those of pigs fed DD, respectively. ADFIs of MR-fed pigs at $17^{\circ}C$, $24^{\circ}C$, and $32^{\circ}C$ compared with pigs fed DD were increased by 108%, 139% and 164% from d 14 to d 21, respectively. Fed efficiency (G/F) of MR-fed pigs at $17^{\circ}C$, $24^{\circ}C$, and $32^{\circ}C$ compared with pigs fed DD were 199%, 162% and 139% of those of pigs fed DD, respectively. As ambient temperature increased, diarrhea scores showed a slight tendency to increase. The advantage of MR feeding was greater when the ambient temperature was higher, but G/F was impaired with increased ambient temperature. We conclude that ambient temperature within the specialized nursery influenced behavior, MR feed intake, and probably piglet energy expenditure. There were no differences between MR-fed and DD-fed pigs for ADG, ADFI and G/F in the subsequent growth period (d 21 to d 49, p>0.05). Maximal advantage of MR feeding was obtained at the intermediate ($24^{\circ}C$) ambient temperature during the overall period (p<0.05). Results from this experiment indicate that a milk replacer feeding system utilized in the early postweaning period can maximize pig growth performance, and that ADG, ADFI and G/F were affected by different ambient temperatures within MR-fed pigs. The high or low temperatures could not support the maximal growth of pigs fed MR.
MR 댐퍼는 자기장의 영향으로 인한 MR 유체의 응집현상으로 자기전단력을 발생한다. MR 유체는 기존유체와 자기입자로 구성되어 있다. 본 연구에서 밀도 1.3, 1.5, $1.7g/cm^3$ 그리고 점도 1,000, 10,000cP를 가지는 MR 유체 6종과 오리피스 형상 6종에 대한 MR 댐퍼의 댐핑력을 조사하였다. MR 유체의 밀도와 점도 변화에 따라서 MR 댐퍼의 댐핑력이 변하였다. 오리피스 형상변화에 대한 댐핑력은 오리피스 갭이 적고 길이가 짧을수록 크게 나타났다. 이들 연구결과로부터 MR 댐퍼의 최적설계를 위해서는 MR 유체의 선정과 오리피스 형상이 중요한 설계변수임을 확인하였다.
In this paper, we propose an algorithm for automatic segmentation of 3-dimesional brain MR images. In order to segment 3-dimensional brain MR images, we start segmentation from a mid-sagittal brain MR image. Then the segmented mid-sagittal brain MR image is used as a mask that is applied to the remaining lateral slices. Then we apply preprocessing, which includes thresholding and region-labeling, to the lateral slices, resulting in simplified 3-D brain MR images. Finally, we remove remaining problematic regions in the 3-dimensional brain MR image using the connectivity-based thresholding segmentation algorithm. Experiments show satisfactory results.
PtMn계 스핀밸브(Spin Valve, SV) 다층박막의 하부층 구조를 달리하여 제작된 시료를 열처리 후 측정한 자기저항(magnetoresistance, MR) 곡선과 자기이력 곡선(MH loop)으로부터 얻은 등방성의 자기적 특성을 조사하였다. PtMn층이 없는 스핀밸브 구조의 Glass/Ta(10 nm)/CoFe(6 nm)/Cu(2.5 nm)/CoFe(3 nm)/Ta(4 nm) 다층박막으로 측정한 MR 곡선에서 얻은 교환결합력($H_{ex}$), 보자력($H_c$), 자기저항비(MR(%))는 각각 0 Oe, 약 25 Oe, 3.3 %이었다. Glass/Ta(10 nm)/CoFe(6 nm)/Cu(2.5 nm)/CoFe(3 nm)/PtMn(6 nm)/Ta(4 nm) 다층박막으로 측정한 MR 곡선에서 반강자성체인 PtMn 박막으로 나타낸 효과로 하여금 나비 날개 형태로 얻은 $H_{ex}$, $H_c$, MR(%)는 각각 2 Oe, 316 Oe, 4.4 %이었다. 반강자성체인 PtMn층이 중간층으로 삽입된 이중 GMR-SV 다층박막으로 측정한 MR 곡선과 MH loop에서 얻은 $H_c$는 각각 37.5 Oe과 386 Oe이었으며, MR(%)는 각각 3.5 %와 6.5 %로 2개의 히스테리시스에서 사각비가 뚜렷하게 대칭적으로 나눠져 자기적 특성을 나타내었다. PtMn계 CoFe 스핀밸브 박막의 매우 작은 $H_{ex}$ 값과 미미한 형상이방성을 갖는 효과로 하여금 비등방성을 갖는 자기적 특성을 잃게 되었다. 이러한 결과는 PtMn 박막의 하부층과 상부층에 있는 SV 다층박막에서 각 강자성체의 자화 스핀배열로 일어나는 효과를 나타내었다.
Magnetorheological damper has received significant attention in recent years due to the reason that it can offer adaptability of active control devices without requiring the associated large power sources. In this paper, performance tests on a MR damper are carried out under different currents, excitation amplitudes and frequencies, the damping characteristics and energy dissipation capacity of the MR damper are analyzed. Elasto-plastic dynamic analysis on a space frame structure incorporated with MR dampers is conducted, and numerical analysis results show that MR dampers can significantly mitigate the structural vibration responses. Finally, the genetic algorithm with the improved binary crossover and mutation technique is adopted to optimize the arrangement of MR dampers. Numerical results show that dynamic responses of the optimal controlled structure are mitigated more effectively.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.