• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.217-230
• /
• 2002

본 연구는 민감도 분석을 통한 다지교차로의 효용성 분석 연구로 신호교차로, Roundabout, 그리고 Modern Roundabout의 특성을 고찰하고 교통류의 특성에 따른 민감도 분석을 통한 교차로 형태를 검토하는 것에 그 목적을 두고 있다. 이를 위해, 첫째, 신호교차로와 Roundabout의 특성과 사례를 고찰하였다. 둘째, 4지교차로와 5지교차로의 교통류 특성별로 교통량을 산정하여, TSIS Tool을 이용한 분석을 통해 교통류 특성별 신호 교차로와 Round about의 민감도를 비교하였다. 셋째, 민감도 비교를 통한 교통류 특성별 효율적인 교차로 형태를 도출하였다. 4지교차로의 경우, 첫째, 일반적으로 V/C비의 변화에 대해 V/C비가 0.7이하일 때는 Roundabout가 V/C비가 0.7을 초과할 때는 신호교차로가 효율적인 것으로 나타났다. 둘째, V/C비별 회전교통량의 변화와 회전교통량 변화별 V/C비 변화에서도 V/C비의 변화의 분석결과와 비슷한 양상을 보였다. 5지교차로의 경우, 첫째, 4지교차로와는 달리 전반적으로 신호교차로 보다는 Roundabout가 더 효율적인 교차로 형태로 나타났다. 둘째, V/C비별 회전교통량의 변화와 회전교통량 변화별 V/C비 변화에서는 V/C비가 0.8을 초과하고 우회전교통량비가 30%∼40%인 경우에 신호교차로가 조금 더 효율적인 것으로 나타났다.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.125-136
• /
• 2005

The current traffic accident reduction procedure in economic feasibility study does not consider the characteristics of road and V/C ratio. For solving this problem, this paper suggests methods to be able to evaluate safety of each road in construction and improvement through developing accident Prediction model in reflecting V/C ratio Per road types and traffic characters. In this paper as primary process, model is made by tke object of urban roads. Most of all, factor effecting on accident relying on road types is selected. At this point, selecting criteria chooses data obtained from road planning procedure, traffic volume, existence or non-existence of median barrier, and the number of crossing point, of connecting road. and of traffic signals. As a result of analyzing between each factor and accident. all appear to have relatives at a significant level of statistics. In this research, models are classified as 4-categorized classes according to roads and V/C ratio and each of models draws accident predicting model through Poisson regression along with verifying real situation data. The results of verifying models come out relatively satisfactory estimation against real traffic data. In this paper, traffic accident prediction is possible caused by road's physical characters by developing accident predicting model per road types resulted in V/C ratio and this result is inferred to be used on predicting accident cost when road construction and improvement are performed. Because data using this paper are limited in only province of Jeollabuk-Do, this paper has a limitation of revealing standards of all regions (nation).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.216-221
• /
• 2006

An investigation of the influence of $WO_3$ and $V_2O_5$ catalysts on the microstructure, phase formation and selective catalytic reduction (SCR) efficiency of the synthesized SCR powders has been carried out. A commercial anatase-$TiO_2$ was used as the catalysts support. For $WO_3(10wt%)/TiO_2$, the W loading to the $TiO_2$ support led to the lower in anatase to rutile transition temperature from $1200^{\circ}C$ of $TiO_2$ support to ${\sim}900^{\circ}C$. The transition temperature was also lowered to below $650^{\circ}C$ in the $V_2O_5$(5 and 10 wt%) added composition. The $WO_3(10wt%)/TiO_2$ SCR powder obtained at $450^{\circ}C$ showed near 100% of $NO_x$ conversion efficiency at $350{\sim}400^{\circ}C$ and for the powder prepared at $650^{\circ}C$ the same efficiency was achieved in wider temperature range $300{\sim}400^{\circ}C$. The highest $NO_x$ conversion efficiency of 100% was obtained in the $V_2O_5(5wt%)/TiO_2$ SCR composition calcined at $650^{\circ}C$ in the relatively wider temperature range $250{\sim}350^{\circ}C$, while the catalytic efficiency considerably decreased for the $V_2O_5(10wt%)/TiO_2$. The lowered conversion efficiency of $NO_x$ observed in the $V_2O_5(10wt%)/TiO_2$ composition calcined at $650^{\circ}C$ was considered to be correlated with the lowered surface area resulting from the increased crystallite growth by highly reactive vanadium loading.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.5
• /
• pp.27-39
• /
• 1971

It is described in this paper that a newly developed quartz frequency modulator using V. V. C. diode would be more suitable for mobile FM portable transmitter, than conventional reactance modulator because of less need for multiplier stages in the former type. It is realized by theoretical and experimental results what is the most optimum relationship between the quartz oscillator, V. V. C. diode and coupled circuit elements in order to get the desired modulation linearity and carrier frequency stability depending upon the variation of circumference temperature and suplied source voltages.

• Journal of Surface Science and Engineering
• /
• v.16 no.4
• /
• pp.173-187
• /
• 1983

Zinc was electrodeposited at temperature from 20$^{\circ}C$ to 60$^{\circ}C$ over the ranges of the current density from 2 to 20 A/dm2 in acid chloride bath. The cathode overpotentials increased with increasing current density and decreasing tem-perature. The (10$.$3)-(10$.$2) preferred orientation developed at cathode overpotentials below about 450mV, the (10$.$3)(10$.$2)-(10$.$1) texture developed at overpotentials between 500mV and 950mV, and the (00$.$1) (10$.$3) texture developed at cathode overpotentials about 1000mV. The (00$.$1) (10$.$3) preferred orientation was also formed at the lower potentials between 400mV and 850mV at temperatures above 40$^{\circ}C$. The preferred orientations of the zinc deposits was discussed was discussed with both cathode overpo-tential and surface energy of deposit lattice planes. The pyramid type of structure with macrostep developed at low cathode overpotentials and the truncated pyramidal type developed at higher overpotenial.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.457-458
• /
• 2020

본 논문은 저전압 직류배전 (LVDC)이 도입된 공장 및 물류센터 등 에서 다수의 전동 지게차를 운용할 때, 효과적으로 충전할 수 있는 지게차 배터리 충전기를 제안하였다. 제안하는 충전기는 SiC 반도체 및 의도적으로 비대칭으로 설계한 공진 인덕터를 사용한 두 개의 위상천이 풀브릿지 컨버터로 구성된다. 이를 통하여 최대 200A급 고속 충전 및 다종의 배터리 규격 (48V, 80V) 대응과 함께 고효율, 고전력밀도를 달성 하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.117-122
• /
• 1999

Laboratory and field investigations of the coefficient of vertical and horizontal consolidation for Yangsan clay deposit were carried out using the conventional oedometer, Rowecell and piezocone test. Correlation among these test methods were also studied. In this paper, the relationship between vertical and horizontal consolidation were suggested such as C$\sub$h(Oed)/=0.75∼1.46 C$\sub$v(Oed)/, C$\sub$h(Rowecell) =1.95∼2.93 C$\sub$v(Oed)/, C$\sub$h(piezocone)/ =1.0∼5.0 C$\sub$v(Oed)/. As a result, a fair approximate estimations of C$\sub$h/ can be made by simple test using the conventional oedometer tests.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.41.2-41.2
• /
• 2011

Recently, scaling down of ULSI (Ultra Large Scale Integration) circuit of CMOS (Complementary Metal Oxide Semiconductor) based electronic devices become much faster speed and smaller size than ever before. However, very narrow interconnect line width causes some drawbacks. For example, deposition of conformal and thin barrier is not easy moreover metallization process needs deposition of diffusion barrier and glue layer. Therefore, there is not enough space for copper filling process. In order to overcome these negative effects, simple process of copper metallization is required. In this research, Cu-V thin alloy film was formed by using RF magnetron sputter deposition system. Cu-V alloy film was deposited on the plane $SiO_2$/Si bi-layer substrate with smooth and uniform surface. Cu-V film thickness was about 50 nm. Cu-V layer was deposited at RT, 100, 150, 200, and $250^{\circ}C$. XRD, AFM, Hall measurement system, and XPS were used to analyze Cu-V thin film. For the barrier formation, Cu-V film was annealed at 200, 300, 400, 500, and $600^{\circ}C$ (1 hour). As a result, V-based thin interlayer between Cu-V film and $SiO_2$ dielectric layer was formed by itself with annealing. Thin interlayer was confirmed by TEM (Transmission Electron Microscope) analysis. Barrier thermal stability was tested with I-V (for measuring leakage current) and XRD analysis after 300, 400, 500, 600, and $700^{\circ}C$ (12 hour) annealing. With this research, over $500^{\circ}C$ annealed barrier has large leakage current. However V-based diffusion barrier annealed at $400^{\circ}C$ has good thermal stability. Thus, thermal stability of vanadium-based thin interlayer as diffusion barrier is good for copper interconnection.

• The Journal of Korean Medicine
• /
• v.27 no.4
• /
• pp.116-124
• /
• 2006

Peripheral nerve injuries are a commonly encountered clinical problem and often result in chronic pain and severe functional deficits. At the Dept. of Oriental Rehab. Medicine, we have used for pain control a herbal bath containing the following herbs: Harpagophytum radix, Atractylodes japonica and Corydalis tuber. In the present study, we investigated the effects of this herbal bath on the recovery rate of the locomotor function and the expression of c-Fos in the ventrolateral periaqueductal gray (vIPAG) region of the brain following sciatic crushed nerve injury in rats. In the present study, characteristic gait change with decreasing of the sciatic function index (SFI) was observed and c-Fos expression in the vIPAG was suppressed following sciatic crushed nerve injury in rats. Immersion into herbal bath enhanced SFI value and restored c-Fos expression in the vIPAG to the control value. These results suggest the herbal bath might activate neurons in the vIPAG, and could facilitate functional recovery from peripheral nerve injury.