• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.2
• /
• pp.91-96
• /
• 2004

In darkroom condition, it was observed that a white picture pattern lasted several minutes leaves a recognizable trace in subsequent black background picture. Although this is not a serious problem for the most current public display or home TV applications, the image sticking should be minimized for future high quality multimedia display applications. In order to characterize this picture memory effect having relatively long time scale, spatially resolved luminance measurement and light waveform measurement have been performed. Pixels located at the outer boundary of white pattern previously displayed shows highest luminance. These cells also shows fastest ignition at the ramp up reset sequence. The luminance and ignition voltage differences between boundary cells and the other cells are increased with display duration and number of sustain-pulse. It is speculated that image sticking observed at the boundary cell is originated from the transport of charged particles and re-deposition of reactive species such as Mg, O provided from strong sustain discharge region.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.157-162
• /
• 2002

The characteristics of DeNOx conversion process by plasma/post-heating system with the simulated gas containing ethene is investigated experimentally. Without plasma treatment, $NO-NO_2$ conversion doesn't occur by $400^{\circ}C$ in a mixture of $N_2/O_2$ with a trace gas of ethene. But $NO-NO_2$ conversion occurs as temperature increases above $400^{\circ}C$. The NO can, however, be converted to $NO_2$ at lower temperatures by treating the gas mixture with non-thermal plasma. The $NO-NO_2$ conversion enhances further by passing the plasma treated gas through the post-heating furnace. Results show that 20%${\sim}50%$ more conversion of NO to $NO_2$ is observed when the temperatures of the post-heating furnace are maintained at $300^{\circ}C$ or $400^{\circ}C$. The additional $NO-NO_2$ conversion by post-heating is due to the reaction of ethene with the byproducts or radicals generated from the plasma reaction.

• Journal of the korean society of oceanography
• /
• v.37 no.4
• /
• pp.232-241
• /
• 2002

The potential role of environmental factors on extractable lipofuscin accumulation rate in the blue crab was studied by examining the effect of temperature on laboratory reared blue crabs and the effect of trace metals from samples collected at impacted sites (Baltimore Harbor) and a relatively pristine site (outdoor ponds at Horn Point Laboratory, Cambridge, MD, USA). Lipofuscin levels did not significantly related with sampling sites or heavy metal concentrations in the crab tissue. Heavy metal body burden was highly variable among sampling sites and tissue types but significantly higher for both impacted areas (Curtis Creek and Inner Harbor) in comparison to the reference site. Among tissue types, gills showed the highest metal concentrations with the exception of Hg, which was highest in muscle tissue. For two groups of crabs that were held at either ambient (4 to 1$0^{\circ}C$) or heated seawater (19$^{\circ}C$) for two months, normalized-lipofuscin levels were significantly different (P-0.001). Results suggest that temperature may affect lipofuscin accumulation (=0.25ng-lipofuscin/mg-protein/temperature-degree day). Therefore, temperature should be considered for accurate age calibration of crab populations using lipofuscin.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.8
• /
• pp.1130-1134
• /
• 2005

An experiment was performed using 20 calves of about one-month old to investigate the effect of chelation therapy with calcium disodium ethylenediaminetetraacetate ($CaNa_2$EDTA) alone or along with antioxidant $\alpha$-tocopherol in lead loaded calves on blood trace minerals, erythrocytic sulfahydryl groups and some haematobiochemical parameters. Fifteen calves were given lead orally at a daily dose of 7.5 mg of 99% pure lead acetate/kg body weight for 28 days. Then the lead was withdrawn on day 28 and the calves were randomly divided into three groups. Each group of five animals was either treated with $CaNa_2$EDTA alone at the dose rate of 110 mg/kg body weight in two divided doses for 4 days or along with $\alpha$-tocopherol at the dose rate of 100 mg/kg body weight orally daily for 7 days, keeping the remaining five calves as lead-exposed untreated controls. Blood samples were collected at the end of the lead exposure (day 0) and thereafter on day 2, 4, 7 and 10 from the start of the chelation treatment. The treatment with EDTA alone led to slow but non-significant improvement in blood copper level, but incorporation of antioxidant $\alpha$-tocopherol in chelation therapy resulted in its significant decline, as recorded on day 7-post treatment. Withdrawal of lead or treatment with $CaNa_2$EDTA alone or along with $\alpha$-tocopherol enhanced the erythrocytic thiol contents and the levels of T-SH and P-SH became statistically (p<0.05) comparable to those of lead-exposed controls by day 7 and 4, respectively. There was no significant (p>0.05) change in serum urea, creatinine, total protein and albumin levels between the treatment groups. It is concluded from the present investigation that treatment with $CaNa_2$EDTA at the present dose rate is safe to be used for chelation in lead loaded calves.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.42-42
• /
• 2011

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.121-121
• /
• 2012

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordant effect of Hwangsu spring was analyzed by pH, temperature, trace elements and organic matter. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, 2011, in Yeongcheon(Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. The Result of ICP analysis, it contain bned Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm). Dyeing and post-mordant procedure; Fabrics(cotton, silk, rayon) were dyed with natural colorants(Sopbora Japonica L., Caesalpinia sappan L., Allium cepa L.) for 20 min at $80^{\circ}C$. Hwangsu spring, aluminium sulfate $14-18H_2O(Al_2(SO_4)_3{\cdot}14-18H_2O)$, iron sulfate peptahydrate($FeSO_4{\cdot}7H_2O$), copper sulfate pentahydrate($CuSO_4{\cdot}5H_2O$) were used by post mordants. But in the case of Caesalpinia sappan L. was dyed after pre-mordanting with Al(II). The fabrics were dyed with each mordant solutions at $25^{\circ}C$ for 10min. The colorless also was measured by color-differnce meter. Comparison with a synthetic mordants, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.510-516
• /
• 1993

$PbTiO_3$ thin films have been formed by rapid thermal annealing(RTA) of $TiO_2$/Pb/$TiO_2$ multilayer films deposited on Si wafers by RF sputtering. Based on the optimal depositon conditions of TiO2 and Pb, $TiO_2$/Pb/$TiO_2$ three layers were deposited for 900$\AA$ each. These films were subjected to RTA process at the temperatures ranging from $400^{\circ}C$ to $900^{\circ}C$ for 30 seconds in air, and were analyzed by X-ray diffraction and transmission electron microscopy to investigate the phases and the microstructures. As a result, perovskite $PbTiO_3$ phases was obtained above $500^{\circ}C$ with the trace of unreacted $TiO_2$. RBS analysis revealed the anisotropic behavior of diffusion that the diffusivity of Pb to the bottom $TiO_2$ layer was faster than that of Pb to the top $TiO_2$ layer. The amorphous Pb-silicate was formed between film and Si substrate due to the diffusion of Pb, but Pb-silicate existed locally at the interface and the amount of that phase was very small. Therefore the effect of bottom $TiO_2$ layer as a diffusion barrier was confirmed. $PbTiO_3$ films formed by current technique showed a relative dielectric constant of 60, and the maximum breakdown field reached 170kV/cm.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.174-183
• /
• 2022

This study was conducted to investigate the effect of the active exercise program using sling on the pain and balance of total knee replacement patients. Subjects were 20 patients who received total knee replacement and are hospitalized, 10 patients in each group were randomly assigned to a group (CPM group) that applied only CPM (Continuous passive motion) and a group (CSG) that combined CPM with a active exercise program using sling. CG was performed CPM 5 days a week, CSG performed CPM 2 days a week and a active exercise program using sling 3 days a week, and each intervention was performed for 40 minutes a day for a total of 4 weeks. Pain was evaluated using VAS (Visual analog scale), and balance was measured using BT4 (Balance training 4) to measure C90 area, trace length, and Sway average velocity with eyes open and closed. As a result, there was a significant decrease in pain in both groups, and there was also a significant difference in the amount of change between groups. In balance, all variables except C90 of CG showed significant changes after intervention, and there was a significant difference between C90 and Vel with eyes closed in the amount of change between groups. Therefore, we believe that CPM and active exercise program using sling are effective interventions to reduce pain and improve balance in total knee replacement patients.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.35-41
• /
• 2006

Antibacterial activities of the trace elements in combination with the food additives were measured against 6 kinds of food-borne microorganisms such as Escherichia coli, Vibrio parahaemolyticus, Staphylococcus aureus, Bacillus cereus, Bacillus subtilis and Pseudomonas fluorescens. The difference of antibacterial activity was not shown among the kinds of food additives, such as dextrin, gelatin and collagen. Zn and Ge in combination with food additives had strong antibacterial effect. Especially, $1\%$ zinc acetate in combination with $1\%$ gelatin was more effective against P. fluorescens and S. aureus than against Bacillus sp., E. coli and V. parahaemolyticus. Minimum inhibitory concentration of zinc acetate in combination with $1\%$ gelatin appeared to be 0.5 mg/mL on S. aureus and P. fluorescens, and 1.0 mg/mL on E. coli, V. parahaemolyticus, B. cereus and B. subtilis. Minimum bactericidal concentration of zinc acetate in combination with $1\%$ gelatin appeared to be 0.5 mg/mL on P. fluorescens and 1.0 mg/mL on E. coli, V. parahaemolyticus, S. aureus, B. cereus and B. subtilis. The zinc acetate in combination with gelatin showed stronger inhibitory effect in acidic range below pH 6.0, and remained active even after heat treatment at $121^{\circ}C$ for 15 min. In comparison with control, the viable cell counts of fish pastes, which were coated with the solution containing both $1\%$ zinc acetate and $3\%$ gelatin, were decreased by more than 100-fold until the storage of 7 days at $10^{\circ}C$. The results indicate that the combined use of zinc acetate and some food additives could prolong the shelf life of fish pastes by 8 days or more at $10^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.1
• /
• pp.8-14
• /
• 1978

In order to determine the feeding value of t:1e waste wood of Lentinus eddodes, the waste wood was milled and treated with $Ca(OH)_2$ and cellulase, then raw waste wood and the treated waste wood were fed to broiler chicken and Korean native goates. The results obtained were as follows; 1. The chemical composition of the waste wood was c. protein 2.26%. c. fat 2.57%. c. fiber 44.60 and c. ash 5.58%. No differences were detected between the raw waste wood and $Ca(OH)_2$ or cellulase treated waste wood in chemical composition. 2. In amino acid composition. no cystine and methionine was showed, but trace amount of Vitamin A, $B_1$, and $B_2$, and cholin chloride were detected. 3. Trichoderma viride SANK. No. 16374 was used to decompose the cellulose. 4. In broiler performance, when waste wood meal was subsituted for 5% wheat bran, no adverse effect was showed on weight gain, feed in take and feed efficiency. But $Ca(OH)_2$ and cellulase treated waste wood meal could be subsituted for 8% wheat bran. 5. In Korean native goat performance, feeding waste wood meal subsituted by 50% various bran (25% defatted rice bran and 25% barley bran) had no adverse effect on growth and feed efficiency. 6. Considering the above results, though the waste wood meal could be replaced to part of various bran, there was a bottle-neck to process the waste wood. The waste wood of Lentinus edodes was little feeding value on bed of ruminant.