• Radiation Oncology Journal
• /
• 제6권2호
• /
• pp.155-161
• /
• 1988

The usefulness of hypertermia for cancer therapy have well been established. The purpose of the present investigation was to ascess the effect of step-up $(42^{\circ}{\rightarrow}44^{\circ}C$ sequence) and step-down $(44^{\circ}{\rightarrow}42^{\circ}C$ sequence) heating on the skin of the hind foot of the mouse. Hyperthermic treatments were given by immersion the hind foot of the mouse in circulating water baths. Skin response was studied by the leg reaction, which was scored according to a numerical scoring system proposed by Urano et al (1980). The results were as follows 1. The skin damage of $44^{\circ}C$ control group was more severe than $42^{\circ}C$ control group (P<0.05), except for 15 min. heating group. 2. The Skin damage of step-down group was more severe than step-up group (P<0.05). 3. The skin damage of $44^{\circ}C$ control group was more severe than step-up group when there is no difference in $44^{\circ}C$ heating time of step-up group from $44^{\circ}C$ control group (P<0.05). 4. In step-down group, the skin damage was more severe than $44^{\circ}C$ control group after preheating 45 min at $44^{\circ}C$ (P<0.05). Therefore, the above findings suggest the normal tissue damage by step-up heating was correlated with heating time of post step-up. The dropping of heating temperature in late phase had more severe damage of the skin than that in early phase during hyperthermia, and so contineous control of satisfactory temperature should be considered as the one of the most important factor for prognosis, complications of clinical hyperthermia

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.558-562
• /
• 1999

승화 성장법을 적용하여 성장된 6H-SiC 결정에 대하여, KSV 이론과 성장 계면에서의 미사면(vicinal plane)상의 step 성장 양상을 근거로 하여, 성장 계면에서의 물질 흡착의 거동과 결함의 생성간의 상호 관계를 고찰하고, micropipes와 내부 결함의 생성 원인을 논하였다. micropipe와 면결함등의 결함들은 ledge 혹은 kink에 침입된 불순물에 의하여 step 성장의 진행이 방해받는 부분에 형성되었다. 따라서, SiC 결정에서 이들 결함의 생성은 SiC 결정 성장 계면에 형성되는 결정학적 step 성장면과 분자 또는 원자들의 격자 이동에 관련이 있음을 알 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.123-129
• /
• 2024

구급대원에게 심폐소생술은 매우 중요하나 이동하는 주들것에서 수행하는 가슴압박은 정확도가 떨어진다. 이 연구의 목적은 이동 중 주들것에서 수행하는 심폐소생술 효과를 높이기 위하여 C-step을 이용하여 주들것의 측면에서 가슴압박을 수행하는 것과 환자의 복부 위에 위치하여 가슴 압박을 수행하는 것에 대하여 차이를 알아보고자 수행되었다. 연구는 C-step 군 20명과 복부 위군 20명을 대상으로 이동 중 주들것에서 2분간 연속된 가슴압박을 수행하였다. 연구결과 C-step을 적용한 군에서 적정한 깊이(t=4.132, p=.000)와 속도(t=7.177, p=.000)를 나타내었으며 정확도가 더 높은 것으로 나타났다(t=6.774, p=.000). 또한 C-step을 적용한 군에서 위치불량(t=-5.197, p=.008)과 너무 얕은 오류가 적은 것으로 나타났다. 결론적으로 C-step을 장착한 주들것에서의 가슴압박은 심폐소생술의 질을 높이고 병원 전 환자의 생존율을 높이는데 도움을 줄 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.261-266
• /
• 1994

The objective of this study is to develop the expert system for R/C box culvert design. This program provided various functions to improve automatic design. The program is composed of five steps. The characteristics of each step are as follows; 1) Preprocessing Step, 2) Analysis Step, 3) View of Memberforce Step, 4) Postprocessing Step, 5) Printing of Design-Sheet Step. Finally, Expert System and Knowledge Database System is developed for the drawing of optimal R/C box-culvert design.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.459-465
• /
• 1994

a-측으로 배향된 $YBa_2Cu_3O_{7-\delta}$ 고온 초전도 박막을 $LaAIO_{3}$(100)단결정 기판에 이중 타게트 off-axis rf마그네트론 스퍼터링법으로 증착하였다. 박막은 기판온도(Ts)$590^{\circ}C$와 $680^{\circ}C$사이에서 단일공정으로 증착하는 one-step방법과, $590^{\circ}C$의 저온에서 a-축으로 배향된 YBCO박막(두께-30nm)을 면저 만들어 틀로 작용시킨 후 그 틀위에 나머지 부분을 기판온도를 승온하면서 증착하는 방법인 two-step방법 등 두 가지 방법을 사용하여 증착시켰다. one-step방법에서는 $T_s$가 증가함에 따라 감소하였으며, ($00 \ell$)피크는 증가하였다. Two-step방법으로 증착한 박막은 증착속도가 감소함에 따라 (h00)피크가 우세하게 나타났다. 박막의 미세구조는 a-축, c- 축 배향성이 혼재하여 핀홀과 같은 결함들이 생성되었다. 모든 경우 $T_s$가 감소함에 따라 a-축 배향성은 우세하였으나 전기적 특성은 저하되었고, 긴 전이온도 폭을 가졌다.

• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.208-220
• /
• 2006

Energy of wheeled mobile robot is usually supplied by batteries. In order to extend operation time of mobile robots, it is necessary to minimize the energy consumption. The energy is dissipated mostly in the motors, which strongly depends on the velocity profile. This paper investigates various 3-step (acceleration - cruise - deceleration) speed control methods to minimize a new energy object function which considers the practical energy consumption dissipated in motors related to motor control input, velocity profile, and motor dynamics. We performed an analysis on the energy consumption various velocity profile patterns generated by standard control input such as step input, ramp input, parabolic input, and exponential input. Based on these standard control inputs, we analyzed the six 3-step velocity profile patterns: E-C-E, P-C-P, R-C-R, S-C-S, R-C-S, and S-C-R (S means a step control input, R means a ramp control input, P means a parabolic control input, and E means an exponential control input, C means a constant cruise velocity), and suggested an efficient iterative search algorithm with binary search which can find the numerical solution quickly. We performed various computer simulations to show the performance of the energy-optimal 3-step speed control in comparison with a conventional 3-step speed control with a reasonable constant acceleration as a benchmark. Simulation results show that the E-C-E is the most energy efficient 3-step velocity profile pattern, which enables wheeled mobile robot to extend working time up to 50%.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.682-689
• /
• 2015

A two-step process was investigated for pretreatment and fractionation of rice straw. The two-step fractionation process involves first, soaking rice straw in aqueous ammonia (SAA) in a batch reactor to recover lignin-rich hydrolysate. This is followed by a second-step treatment in a fixed-bed flow-through column reactor to recover xylo-oligomer-rich hydrolysate. The remaining glucan-rich solid cake is then subjected to an enzymatic process. In the first variant, SAA treatment in the first step dissolves lignin at moderate temperature (60 and $80^{\circ}C$), while in the second step, hot-water treatment is used for xylan removal at higher temperatures ($150{\sim}210^{\circ}C$). Under optimal conditions ($190^{\circ}C$ reaction temperature, 30 min reaction time, 5.0 ml/min flow rate, and 2.3 MPa reaction pressure), the SAA-hot-water fractionation removed 79.2% of the lignin and 63.4% of the xylan. In the second variant, SAA was followed by treatment with dilute sulfuric acid. With this process, optimal treatment conditions for effective fractionation of xylo-oligomer were found to be $80^{\circ}C$, 12 h reaction time, solid-to-liquid ratio of 1:12 in the first step; and 5.0 ml $H_2SO_4/min$, $170^{\circ}C$, and 2.3 MPa in the second step. After this two-step fractionation process, 85.4% lignin removal and 78.9% xylan removal (26.8% xylan recovery) were achieved. Use of the optimized second variant of the two-step fractionation process (SAA and $H_2SO_4$) resulted in enhanced enzymatic digestibility of the treated solid (99% glucan digestibility) with 15 FPU (filter paper unit) of CTec2 (cellulase)/g-glucan of enzyme loading, which was higher than 92% in the two-step fractionation process (SAA and hot-water).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.555-556
• /
• 2009

• 한국염색가공학회지
• /
• 제10권3호
• /
• pp.10-19
• /
• 1998

This paper investigates the change of mechanical properties and thermal shrinkage in commercial multi-filament PET(polyethylene terephthalate) , namely, regular yarn, POY, DTY and composite yarn. To determine changing the effects of processing steps, these were examined at three steps process simulation conditions. The first step is sizing simulation$(S-1\;step\;:\;130^\circ{C}\times2\;min$., hot air treatment under 0.1 gf/d load), the second step is scouring simulation$(S-2\;step\;:\;100^\circ{C}\times20\;min$., boiling water treatment under free tension)and final step is setting simulation$(S-3\;step\;:\;180^\circ{C}\times2\;min$., hot air treatment under free tension). Regular yarn in multi-step treatment showed higher shrinkage at S-3 step and DTY showed higher in at S-1 step. While POY was relaxed at S-1 step, composite yarn showed different shrinkage properties depending on composite yarn type. Mechanical properties showed good relationship with shrinkage : high shrinkage makes initial modulus decrease and bleating strain increase. It also makes decreasing yield strain and yield stress decrease.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.178-178
• /
• 2012

CIGS 단일 타켓을 RF 마그네트론 스퍼터링을 이용하여 파워별(20. 40, 60, 80W)로 Mo/SLG 위에 증착하여 열처리를 실시하였다. 파워 증가에 따라서 박막의 결정성은 이온의 운동에너지 증가에 따라서 결정성이 향상될 것을 예상할 수 있다. 그리고 1step $350^{\circ}C$, 1step $550^{\circ}C$, 2step $350^{\circ}C{\sim}550^{\circ}C$, 3가지 열처리 조건를 실시했을 경우 각 각의 열처리 방법에 따라서 결정성이 달라지는 것을 확인 할 수 있었다. 1step으로 열처리를 실시한 경우 보다 2step의 열처리를 실시 한 경우가 결정성이 더 향상되는 것으로 예상된다.