• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.81-82
• /
• 2003

Two antibiotics, doxycycline (doxy) and ciprofloxacin (cipro) were applied under a variety of conditions to silk, and to silk that had previously been hydrolyzed. FTIR-ATR analyses indicated that the drastic increase in sorption of antibiotics by hydrolyzed silk was attributable to both chemical and conformational changes that occurred on hydrolysis. A high sorption of doxy by hydrolyzed silk did not necessarily give a more infection-resistant material as determined by a zone of inhibition test. Conversely, the same hydrolysis considerably increased both sorption of cipro and zone of inhibition of cipro-treated silk dyed at 65$^{\circ}C$ and 85$^{\circ}C$.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.905-914
• /
• 1996

To study the effect of the bleaching agents in detergents on the degradation of cotton fabrics, the carboxyl contents, copper numbers, degree of polymerization, the change of tensile strengths and fiber surfaces of cotton fabric before and after washing were examined. The results obtained were as follows: As the cycles and temperature of washing increased, the carboxyl content of washed cotton fabric changed little but the copper unmber of cotton fabric was increased. At 6$0^{\circ}C$ , 8$0^{\circ}C$ the copper number of cotton fabric washed with soidum perborate (PB) was higher than that of with sodium percarbonate (PC). The degree of polymeriazation and tensile strength of cotton fabric were decreased and at higher temperature those were more decreased but were less decreased when tetraacetyehylenediamine (TAED) was added. The degree of polymerization had negative relation with copper unmber but with tensile strength of cotton fabric had positive relation. Cotton fiber surface was more degraded by bleaching agents and hydrogen peroxide exhaustion was increased as the temperature of washing increased. And hydrogen peroxide exhaustion had negative relation with the degree of polymerization.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 1988

In order to investigate a practical application of the fibrous adsorbent to heavy metal ions, acrylic fibers were treated with the hydroxylamine solution that was producted by hydroxylamine hydrochloride and potasium hydroxide in a condition of strong alkaline and $70^{\circ}C$. The adsorption mechanism of copper(2) ion on the fibrous adsorbent, that is hydroxylaminated acrylic fibers, was studied. The adsorption of copper(2) ion was explained in terms of the activated adsorption that are formed the complex with the ligand, such as C=N, N-H, NHOH, on the surface of the adsorbent. The activation energy was evaluated to be 3.8 Kcal/mol. and the times of adsorption equilibrium was approximately 10 minutes. The uptake of copper(2) ion was found to be effected with the increase of temperatures and the pH dependence.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.229-234
• /
• 2005

In this paper, chitosan was suggested for using as a replacement for sodium alginate in the pretreatment print paste for digital ink-jet printing for cotton fabric. Pretreatment print pastes prepared from the mixture of chitosan and acetic acid with the appropriate viscosity gave satisfactory prints on the cotton fabric. Chitosan-treated cotton fabrics were digitally ink-jet printed with four different colors and the color fastness rating of the printed fabrics was satisfactory. Experimental results revealed the possibility of pre-treating the cotton with chitosan to replace the sodium alginate normally present in the pretreatment print paste recipe.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.117-121
• /
• 2004

Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.

• 한국의류학회지
• /
• 제35권1호
• /
• pp.115-124
• /
• 2011

This study provides an eco-friendly dyeing processing for chitosan fiber using Oenothera odorata jacquin as a dye. The effects of chemical mordants (Al, Cu, Fe) and natural mordant (Chestnut shell) on the color change for dyed chitosan fibers were measured by K/S values, L, $a^*$, $b^*$, H, V, C values, color fastness, and antimicrobial activity. The results are as follows. Dyeing conditions of Oenothera odorata jacquin on chitosan fibers were optimized to $70^{\circ}C$, 30 minutes and 200% on weight of fabric (o.w.f.). The pre-mordant concentration of aluminium (Al), copper (Cu) and iron (Fe) of chitosan fibers was optimized to 3% (o.w.f.) and 1% (o.w.f.), respectively. The post-mordant concentration of chemicals, such as Al, Cu and Fe, on chitosan was determined to 1% (o.w.f.). The hue of chitosan fibers by chemical mordants was measured to be reddish & yellow. The pre-mordant concentration of Chestnut shell of chitosan was optimized to 70% (o.w.f.). The post-mordant concentration of Chestnut shell on chitosan was determined to be 50% (o.w.f.). The hue of chitosan fibers by Chestnut shell mordant was measured to be reddish & yellow. The wet cleaning fastness of chitosan fibers was improved by a pre-mordant that used chemical mordants. In the case of the Chestnut shell mordant, the wet cleaning fastness was improved by a post-mordant. The dry cleaning fastness of chitosan fibers was excellent regardless of mordants and mordant methods. The antimicrobial activity of the chitosan fiber was shown at 99.9% and its excellent qualities remained after the dyeing and mordant processing.

• 한국염색가공학회지
• /
• 제27권4호
• /
• pp.334-339
• /
• 2015

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the paramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. In addition, aliphatic polyketone, which has excellent strength, modulus, chemical stability and reasonable price, is being developed only in South Korea. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber yarn for technical textiles. For this purpose, two kinds of yarns are prepared, mechanical properties of coated and uncoated polyketone yarns such as tensile strength, elongation and modulus were examined before and after weather resistance test(temperature $60^{\circ}C$, humidity 60%, amount of power $0.67w/m^2$). The differences of mechanical properties between uncoated and coated yarns for high functional technical textiles and composite materials are estimated through this study.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.97-103
• /
• 2017

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the p-aramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber for technical textiles. For this purpose, dyed polyketone fabric is prepared, mechanical properties of coated and uncoated polyketone fabrics such as tensile strength, elongation and tear strength were examined before and after weather resistance test(temperature $63{\pm}3^{\circ}C$, humidity 60%, amount of power $0.35w/m^2$). The differences of mechanical properties between uncoated and coated fabrics for high functional technical textiles and composite materials are estimated through this study. The UV-stability of polyketone fabric showed obvious improvement after coating. After 168h(7day) of UV exposure, the coated fabric showed less deterioration in mechanical properties with the retained tensile strength and elongation at break greater than 22 and 17% of the uncoated polyketone fabrics values, respectively.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1475-1483
• /
• 2001

The purpose of this study was to determine the physiological responses and subjective sensation according to fiber content of socks. Six female students participated in the wear trial test which was conducted in controled environmental chamber with 26${\pm}$1$^{\circ}C$ and 60${\times}$3%. R.H.SAS program was used for statistical analysis. The results of this study were as follows. Mean skin temperature was significantly different among three different socks. AWNP socks had the highest mean skin temperature and instep temperature. Also relative humidity in the microclimate of socks as well as heart rate were influenced by fiber content of socks, However, test of subjective sensation such as thermal, humid, comfort sensation showed that there was no significant difference among three different socks thermal sensation during the exercise and recovery period.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.938-947
• /
• 2005

Kenaf basts were double retted by using water and enzyme. The best conditions were enzyme concentration $0.125\%$ and 1 day treatment at $50^{\circ}C$, 4 days treatment at $20^{\circ}C$. It was showed that the double rotting could be more economical and eco-friendly than just water rotting or enzyme rotting. Kenaf fibers have been cottonized by removing lignin and hemicellulose partially. In order to cottonize kenaf fiber, lignin of kenaf fibers were removed by sodium chlorite and then hemicellulose of kenaf fibers were removed by sodium hydroxide. The cottonizing phenomenon of kenaf fibers were was confirmed in transversal and longitudinal photograph of SEM. The tensile strength and crystallinity of cottonized fiber were investigated. The tensile strength and crystallinity were lower as the lignin and hemicellulose of kenaf fibers were less.