• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.131-137
• /
• 2009

In this paper, we have manufactured hole type PRAM unit cell using phase change material $Ge_2Sb_2Te_5$. The phase change material $Ge_2Sb_2Te_5$ was deposited on hole of 500 nm size using sputtering method. Reset current of PRAM unit cell was confirmed by measuring R-V characteristic curve. Reset current of manufactured hole type PRAM unit cell is 15 mA, 100 ns. And electro and thermal characteristics of hole type PRAM unit cell were analyzed by 3-D finite element analysis. From simulation temperature of PRAM unit cell was $705^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.643-646
• /
• 2005

직접 메탄올 연료전지는 휴대용기기의 전원으로써 기대되고 있다. 그러나 메탄올의 crossover, 느린 산화반응과 같은 몇 가지 해결해야 할 문제점을 갖고 있다. 이에 메탄올을 대체할 연로로서 이론적으로 높은 기전력 (1.45 V)을 갖는 개미산이 제안되었다. 본 연구에서는 직접 개미산 연료전지에 대한 이전 연구를 바탕으로 개미산 연료전지에 우수한 성능을 나타내는 촉매를 개발하고자 하였다. 기존의 연구에서 Pt-Pd/C 촉매가 개미산에 대해 우수한 산화반응을 보이며 높은 OCP를 나타내어, 본 연구에서는 deposition method을 이용하여 Pt-Pd 촉매를 제조한 후 그 특성을 조사하였다. Pt-Pd 촉매는 이전의 연구에서 우수한 성능을 나타낸 Pt-Pd 촉매보다 상온에서 2배 이상의 우수한 성능을 나타내었다.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1041-1044
• /
• 1992

A solar cell should be operated at the maximum output point on the I-V characteristic curve with constant current and constant voltage in order that the solar energy be fully utilized. According to, in this paper, we describes a controller which can track the maximum power point of a solar arry using current and voltage ripple variation of step up chopper system. The control circuit is desinged such that actual current and voltage are sensed directly from the solar cell array. These two signal are then holded sampling and multiplies by a single chip multiplier.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.78-81
• /
• 2008

A hollow cathode which has extremely stable discharge characteristic has been developed. This is composed of the two separated lanthanum hexaboride(LaB6) of a disk type in the tube as the electron emitters. The way of design is of great advantage to extend the surface discharge area of the LaB6, which is also useful for optimal fixing of the LaB6. The hollow cathode is capable of producing 30 kW(100 V, 300 A) of power continuously. Because the generated plasma beam with the high temperature(above $3000^{\circ}C$) from the hollow cathode passes through the center hole of the two intermediate electrodes, it is designed with the high temperature material of the tungsten and the suitable structure of the water cooling. The combinations of the hollow cathode and the two intermediate electrodes are practically useful for the ion plating plasma beam source.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.585-589
• /
• 2012

The characteristics of interface layer and the effect of mole fraction of inlet gas mixture($B_2H_6/H_2/N_2/TiCl_4$) on the microstructure of Ti(B,N) films were studied by microwave plasma hot filament CVD process. Ti(B,N) films were deposited on a substrate(STD-61) to develop a high performance of resistance wear coating tool. Ti(B,N) films were obtained at a gas pressure of 1 torr, bias voltage of 300 V and substrate temperature of $480^{\circ}C$ in $B_2H_6/H_2/N_2/TiCl_4$gas system. It was found that TiN, $TiB_2$, TiB and hexagonal boron nitride(h-BN) phases exist in thin layer on the STD-61.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.6
• /
• pp.919-927
• /
• 2007

Antagonistic fluorescent pseudomonads isolated from rhizospheric soil of rice were characterized by 16S rRNA amplicon and fatty acid methyl ester (FAME) analyses. Antagonistic isolates were grown in the fermentation media, and production of antibiotics was confirmed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Production of fungal cell-wall-degrading enzymes such as protease, cellulase, pectinase, and chitinase was determined. Dendrogram based on the major and differentiating fatty acids resulted into 5 clusters, viz., cluster I (P. pseudoalcaligenes group), cluster II (P. plecoglossicida group), cluster III (P. fluorescens group), cluster IV (P. aeruginosa group), and cluster V (P. putida group). Characteristic presence of high relative proportions of cyclopropane (17:0 CYCLO w7c) was observed in antagonistic bacteria. Data revealed biodiversity among antagonistic fluorescent pseudomonads associated with the rice rhizosphere. Results presented in this study will help to identify the antagonistic isolates and to determine their mechanisms that mediate antagonism against fungal pathogens of rice.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.810-812
• /
• 1998

We studied on the $\pi$-A isotherm of the L-$\alpha$-DLPC was measured at the air-water interface varying with the compressing speed and amounts of solutions for spreading. The molecular arrangement of deposited films were evaluated by measuring the absorption with the UVspectrometer. We made structures of metal(Au)/organic thin films (L-$\alpha$-DLPC)/Metal(Au), the number of accumulated layers are 3. And I-V characteristic of the device examined.

• Journal of the Korean Home Economics Association
• /
• v.48 no.3
• /
• pp.125-134
• /
• 2010

The purpose of this study was to analyze the characteristics and images of colors in the stewardess's uniforms. For this study, 530 color samples were selected by extracting digital color data by using the Eyedropper Tool of Photoshop 7.0. The RGB color data were transformed into H V/C and the attributes of colors and tones were analyzed. The color images were analyzed with the color image scales of IRI and Shigenobu Kobayashi. As a results, purple-blue(21.7%), neutral(20.9%), red(17.9%) and yellow(10.8%) were found to be the most frequently used colors. In the tone analysis, vivid tone(18.7%) occupied high frequency and the next orders were white(17.4%), dark grayish(12.8%), light(8.5%), dark(8.1%). The color images were focused on dynamic, modern, casual, gorgeous, classic, elegance images in the color image scales of IRI and Kobayashi.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.748-752
• /
• 2004

The Hydrogenated amorphous carbon (a-C:H) thin films are deposited to fabricate suppored layer on silicon substrate with a closed field unbalanced magnetron(CFUBM) sputtering system. This study focuses on the characteristic of Diamond like carbon (DLC) films and Pb(Zr,Ti)$O_3$ (PZT) films for membrane structure. The deposition rate and the surface roughness of DLC fims decrease with DC bias voltage. hardness is 26 GPa at -200 V. Interface of DLC/Si and Pt/DLC layers was excellent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.358-358
• /
• 2010

To improve the programming/erasing speed and leakage current of multiple dielectric stack tunnel barrier engineering (TBE) Non-volatile memory, We propose a new concept called staggered structure of TBE memory. In this study, We fabricated staggered structure capacitor on $Si_3N_4$ stacked HfAlO and measured C-V curve that can observe tunneling characteristic of this device as various annealing temperature compared with that of single layer $SiO_2$ capacitor.